- **Seven Relay Output Channels:** Provides 7 Form A (normally open) relay outputs, each capable of switching up to 1.0 A at 24 VDC or 0.5 A at 120 VAC. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting multiple baud rates (1200 to 115.2 kbps) and Modbus RTU/ASCII protocols. Up to 256 modules can be connected in a single RS-485 network with a maximum cable length of 1200 meters (without repeater). - **LED Channel Indicators:** Each output channel includes an individual LED indicator for real-time status monitoring. - **Galvanic Isolation:** Input and output circuits are galvanically isolated to protect against electrical noise and ground potential differences. - **Wide Power Supply Range:** Operates from a 10–30 VDC power source, consuming approximately 1.9 W. - **Extended Temperature Range:** Designed for operation in harsh environments, with an operating temperature range from -25°C to +75°C and storage range from -30°C to +75°C. - **Dual Watchdog System:** Incorporates both hardware (module) and software (host) watchdogs to ensure continuous operation and fail-safe behavior in case of communication or system errors. - **EEPROM Configuration Storage:** Stores configuration parameters such as address, baud rate, and protocol settings in non-volatile memory. - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch or terminal allows resetting the module to default communication parameters for troubleshooting or reconfiguration. - **Modbus Protocol Support:** Fully compatible with Modbus RTU and ASCII command sets, enabling easy integration with PLCs, SCADA systems, and industrial PCs.

Manufacturer: TOPSCCC

Category: Modules Relay

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067 has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067 has short operating time and was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module Relay DIO

ExpertDAQ Relay modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067D has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067D has a LED-display for each channel and short switching cyle, The EX9067D was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module Relay DIO

- **Multi-Serial Communication Support:** Equipped with **7 RS-232 ports** and **1 RS-485 port** with automatic direction control, enabling simultaneous communication with multiple serial devices. - **Ethernet Connectivity:** Integrated **10Base-T Ethernet port (RJ-45)** for TCP/IP networking, allowing remote access and control over LAN or Internet. - **Embedded DOS Environment:** Runs **Datalight ROM-DOS** with **miniBIOS** and **SOCKETS** for embedded TCP/IP communication, supporting both client and server operations. - **Virtual COM Port Functionality:** Supports **VSP/VirCOM** software for creating virtual serial ports on a host PC, enabling legacy COM-based applications to communicate over Ethernet without modification. - **High Reliability and Industrial Design:** Fanless, compact, and vibration-resistant enclosure suitable for DIN-rail mounting in industrial environments. - **Integrated Real-Time Clock (RTC):** Maintains accurate timekeeping for scheduling and logging applications. - **Onboard Memory Resources:** Includes **512 KB Flash memory** and **512 KB SRAM**, providing sufficient space for embedded applications and data buffering. - **Built-in 5-Digit LED Display:** Displays system information such as IP address, baud rates, and COM port configurations. - **Wide Temperature Operation:** Designed for industrial temperature ranges, ensuring stable operation in demanding conditions.

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232

- **Industrial Embedded DOS Platform:** Runs Datalight ROM-DOS with MiniBIOS and Sockets for TCP/IP networking. - **High Connectivity:** - 7 × RS-232 serial ports - 1 × RS-485 port with automatic direction control - 1 × 10Base-T Ethernet port (RJ-45 connector) - **Virtual COM Port Support:** Compatible with VSP/VirCOM software for mapping Ethernet-connected serial ports as virtual COM ports on a PC. - **Fanless, Rugged Design:** Compact, vibration-resistant enclosure suitable for harsh industrial environments. - **Wide Operating Temperature Range:** Designed for continuous operation in industrial conditions. - **Integrated 7-Segment LED Display:** 5-digit display for system status, IP address, and communication parameters. - **Built-in RTC, NVRAM, and Serial EPROM:** Provides persistent storage for configuration and timekeeping. - **Flexible Software Utilities:** Includes tools for configuration, file transfer, ROM updates, and diagnostics (e.g., XM.EXE, TOROM.EXE, INFOSER.EXE, NETTEST). - **Network Transparency:** Allows RS-232/RS-485 devices to be accessed over Ethernet as if they were local COM ports. - **DOS-Based Development Environment:** Supports standard DOS applications and libraries for embedded control.

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232

- **Multi-Port Serial Communication:** Equipped with **7 RS-232 ports** and **1 RS-485 port**, allowing simultaneous communication with multiple serial devices such as sensors, controllers, and PLCs. - **High Memory Capacity:** Integrated **512 KB Flash memory** for firmware and configuration storage, and **512 KB SRAM** for runtime data processing and buffering. - **Real-Time Clock (RTC):** Built-in RTC ensures accurate timekeeping for event logging, scheduling, and time-stamped data acquisition. - **7-Segment Display:** Provides real-time visual feedback for operational status, error codes, or communication activity, simplifying on-site diagnostics. - **Modbus Protocol Support:** Fully supports **Modbus RTU/ASCII** communication, enabling seamless integration with Modbus-compatible devices and SCADA systems. - **Industrial-Grade Design:** Designed for harsh environments, offering stable operation under wide temperature ranges and electrical noise conditions. - **Flexible Configuration:** Supports software-based configuration for communication parameters, baud rates, and protocol settings. - **Compact Form Factor:** Space-efficient design suitable for DIN-rail or panel mounting in control cabinets. - **Low Power Consumption:** Optimized for continuous operation with minimal energy usage. - **High Reliability:** Non-volatile memory ensures data retention and system stability during power interruptions.

Manufacturer: TOPSCCC

Category: Modules Ethernet/Modbus

- **Multi-Port Serial Communication:** Equipped with **7 RS-232 ports** and **1 RS-485 port**, the EX9188E8-M supports simultaneous multi-channel serial communication, enabling integration with a wide range of industrial devices such as PLCs, sensors, HMIs, and controllers. - **High-Capacity Memory:** Features **512 KB Flash memory** for firmware and data storage and **512 KB SRAM** for high-speed data buffering and processing, ensuring stable operation even under heavy communication loads. - **Real-Time Clock (RTC):** Integrated RTC provides precise timekeeping for timestamping data logs, event tracking, and synchronization across networked systems. - **Modbus Protocol Support:** Fully compatible with **Modbus RTU/ASCII** communication standards, allowing seamless integration into existing Modbus-based automation networks. - **Industrial-Grade Design:** Engineered for reliability in harsh environments, with robust electrical isolation, surge protection, and wide operating temperature support (typical for EX series modules). - **Compact and Modular Form Factor:** Designed for DIN-rail or panel mounting, the compact housing allows easy installation in control cabinets or distributed I/O panels. - **Flexible Configuration:** Supports configurable communication parameters (baud rate, parity, stop bits, data bits) for each serial port, enabling interoperability with diverse equipment. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for continuous 24/7 industrial use.

Manufacturer: TOPSCCC

Category: Modules Ethernet/Modbus

7-inch open-frame industrial touch monitor

7-inch open-frame industrial touch monitor with 800 x 480 resolution, LED backlight rated up to 50,000 hours, 10-point PCAP touchscreen with anti-fingerprint coating, HDMI x1 and VGA x1 video input, USB Type-B for touch, front IP65 protection, DC 12V input, and operating temperature -20°C to 70°C.

Manufacturer: Adlink Technology Inc.

Category: No category

- **PISA Half-Size Slot CPU Board:** Conforms to the PISA (PCI + ISA) bus standard, enabling hybrid connectivity for both legacy ISA and modern PCI peripherals. - **Integrated LCD/VGA Controller:** Equipped with a **C&T69000 Flat Panel Display Controller**, supporting both CRT and LCD displays for flexible visual output options. - **Ethernet Connectivity:** Onboard Ethernet interface for network communication and remote system management. - **Intel 82443BX Chipset:** Provides stable and proven performance for Pentium-class CPUs, ensuring compatibility with a wide range of industrial applications. - **Processor Support:** Compatible with Intel processors operating between **233 MHz and 550 MHz**, offering scalable performance for various workloads. - **Memory Expansion:** Two **168-pin DIMM sockets** supporting up to **1 GB SDRAM**, allowing for efficient multitasking and data handling. - **Comprehensive I/O Interfaces:** - **2 × Serial Ports (RS-232, 16550 UART compatible)** - **1 × Parallel Port (EPP/ECP mode)** - **PS/2 Mouse and Keyboard Ports** - **USB Interface** - **IDE and FDD connectors** for storage devices - **Watchdog Timer:** Hardware-based system monitoring for automatic recovery from system hangs or failures. - **Power Requirements:** Operates on **+5V DC at 12A**, optimized for industrial power supplies. - **Compact Form Factor:** **185 mm × 127 mm**, suitable for space-constrained enclosures and embedded systems. - **PCI and ISA Bus Support:** Ensures compatibility with a wide range of expansion cards and legacy hardware.

Manufacturer: Boser

Category: Slot-CPUs

- **Processor Compatibility:** Supports Intel 786-class CPUs operating between 233 MHz and 650 MHz, providing scalable performance for various industrial and embedded applications. - **Chipset:** Utilizes the Intel 82443BX chipset, known for its stability and compatibility with a wide range of Intel processors and peripheral devices. - **Display Controller:** Integrated Flat Panel Display Controller (C&T69000) supporting both LCD and VGA outputs, enabling direct connection to flat panel displays and CRT monitors. - **Memory Support:** Two 168-pin DIMM sockets supporting up to 1 GB of SDRAM, allowing flexible memory configurations for different performance requirements. - **Storage Interfaces:** Includes IDE interface for HDD and FDD connections, supporting standard 3.5" and 2.5" drives for data storage and system boot. - **Serial and Parallel Ports:** Two serial ports (16550-compatible RS-232) and one parallel port (EPP/ECP mode) for legacy device connectivity. - **Peripheral Interfaces:** PS/2 ports for mouse and keyboard, USB interface for modern peripheral connectivity. - **Watchdog Timer:** Integrated hardware watchdog for system reliability and automatic recovery in case of software or hardware failure. - **Bus Architecture:** Supports both PCI and ISA buses, ensuring compatibility with a wide range of expansion cards and legacy hardware. - **Power Requirements:** Operates on a 5V DC power supply with a current draw of approximately 12A, suitable for industrial backplane environments. - **Compact Form Factor:** Dimensions of 185 mm x 127 mm, designed for PISA slot installation in industrial chassis.

Manufacturer: Boser

Category: Slot-CPUs

- **Multi-Sensor Input Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N for wide-ranging temperature measurement applications. - **High-Resolution Conversion:** 16-bit analog-to-digital conversion ensures high precision and stability. - **8 Differential Input Channels:** Each channel is fully differential, minimizing noise and interference. - **Wide Input Range:** Supports voltage inputs from ±15 mV to ±2.5 V and current inputs of ±20 mA (with external 125 Ω resistor). - **Open-Loop (Break-Line) Detection:** Detects thermocouple disconnection or wiring faults, ensuring reliable monitoring. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance signal integrity. - **RS-485 Communication Interface:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Flexible Configuration:** Configurable via ASCII commands or supplied software; supports INIT* mode for resetting and reconfiguration. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial power systems. - **Compact and Modular Design:** DIN-rail mountable, designed for distributed I/O systems. - **High Noise Rejection:** CMR of 150 dB and NMR of 100 dB at 50/60 Hz for superior noise immunity. - **Temperature Stability:** Zero drift of 0.5 μV/°C and span drift of 25 ppm/°C. - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **Firmware and Protocol Flexibility:** Supports ASCII command set and Modbus RTU protocol (in BL-M variant).

Manufacturer: TOPSCCC

Category: Module AD In

The EX9019-M Analog In 16 bit Modbus RTU module for thermocouple excels at use for temperature measurement with one of the sensors J, K, T, E, R, S, B or N or may be used to measure analogue voltages in the measuring ranges ±15mV/±50mV/±100mV/±500mV/±1V and ±2,5V or currents between ±20mA (with resistor 125Ohm), with a sampling rate of 10 Hz, The Analog In RS485 module has open-loop detection and can be operated in a wide temperature range, features: measure voltages in measuring ranges from ±15mV to ±2,5V, support all popular thermocouple, break-line detection, output as RS485 interface, Communicate via Modbus-RTU, In- and Output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC

Manufacturer: TOPSCCC

Category: Modbus AD In

The EX9018BL-M Analog In 16 bit Modbus RTU module for thermocouple excels at use for temperature measurement with one of the sensors J, K, T, E, R, S, B or N or may be used to measure analogue voltages in the measuring ranges ±15mV/±50mV/±100mV/±500mV/±1V and ±2,5V or currents between ±20mA with a sampling rate of 10 Hz, The Analog In RS485 module has open-loop detection and can be operated in a wide temperature range, features: measure voltages in measuring ranges from ±15mV to ±2,5V, support all popular thermocouple, break-line detection, output as RS485 interface, Communicate via Modbus-RTU, In- and Output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC

Manufacturer: TOPSCCC

Category: Modbus AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **16-bit Resolution:** Provides high precision for temperature and voltage measurements. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multiple Input Ranges:** Configurable for ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or ±20mA (with external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (zero drift 0.5 μV/°C, span drift 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance system reliability. - **RS-485 Communication:** Two-wire interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol:** Fully compatible with Modbus RTU for easy integration into SCADA, PLC, and DCS systems. - **Cold Junction Compensation (CJC):** Built-in compensation for accurate thermocouple temperature readings. - **Open Circuit Detection:** Detects thermocouple break conditions (available on BL and 19 variants). - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Dual Watchdog System:** Includes both module and host watchdogs for enhanced reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type. - **INIT* Mode:** Hardware switch for resetting or reconfiguring communication parameters. - **Compact and Rugged Design:** Suitable for industrial environments with wide operating temperature range.

Manufacturer: TOPSCCC

Category: Modbus AD In

- **Eight Differential Analog Input Channels:** Supports independent measurement of voltage and current signals across eight isolated channels. - **Multi-Range Input Capability:** Configurable for ±20 mA, 4–20 mA, ±10 V, ±5 V, and 1–5 V input ranges. - **High Resolution and Accuracy:** 16-bit A/D conversion with ±0.05% accuracy at 25°C, ensuring precise signal acquisition. - **Channel-to-Channel Isolation:** Each input channel is electrically isolated to prevent cross-interference and enhance signal integrity. - **Automatic Noise Filtering:** Integrated 50/60 Hz auto noise filter with 60 dB normal mode and 88 dB common mode rejection. - **Industrial-Grade Protection:** Overvoltage protection up to 60 VAC and overcurrent protection up to 300 mA. - **Hardware Watchdog:** Ensures continuous operation and system recovery in case of communication or hardware failure. - **Wide Operating Temperature Range:** Designed for harsh environments, operating reliably from -30°C to +75°C. - **DIN-Rail Mountable:** Compact industrial enclosure (132 × 125 × 47.5 mm) for easy installation in control panels. - **Standard Modbus Communication:** Compatible with Modbus RTU and ASCII protocols over RS-485 (3-wire). - **User-Friendly Configuration:** DIP switch settings for baud rate, address, and protocol selection; no software required for basic setup. - **LED Status Indicators:** Visual feedback for power, communication, and I/O activity. - **High Noise Immunity:** Compliant with IEC61000-4-4 EFT Level 3 and IEC61000-4-2 ESD Level 3 standards. - **Network Scalability:** Supports up to 63 modules on a single RS-485 bus without a repeater, with a maximum network distance of 4000 feet.

Manufacturer: Sunix

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Relay Outputs:** Provides 8 Form A (normally open) relay channels for switching AC or DC loads. - **High Load Capacity:** Each relay supports up to 5A at 250VAC or 30VDC, suitable for controlling solenoids, contactors, and other actuators. - **Standard Modbus Communication:** Supports Modbus RTU and ASCII protocols over RS-485 (3-wire), ensuring interoperability with SCADA, PLC, and DCS systems. - **High-Speed Communication:** Baud rates selectable from 1200 to 115.2 kbps (default 115.2 kbps). - **Addressable Network:** Supports up to 63 modules on a single RS-485 bus without a repeater, with a maximum network distance of 4000 feet (1200 meters). - **3-Way Isolation Protection:** Provides 3000 Vrms isolation between RS-485, logic, and field sides, plus channel-to-channel isolation for enhanced safety and noise immunity. - **Dual Watchdog System:** Hardware and communication watchdogs ensure continuous operation and fail-safe output states in case of communication loss. - **User-Friendly LED Indicators:** LEDs display power, communication (RX/TX), I/O status, and terminal resistor activation for easy diagnostics. - **DIN-Rail Mounting:** Compact industrial housing (132 × 125 × 47.5 mm) designed for DIN-rail installation, with slide-out labeling for easy maintenance. - **Wide Operating Temperature Range:** Operates reliably from -30°C to +75°C, suitable for demanding industrial environments. - **Fail-Safe and Power-On Output Control:** Configurable output states for startup and communication failure conditions. - **TPC (Time Proportion Control):** Converts analog percentage values (0–100%) into digital pulse-width outputs for process control applications. - **Software-Free Configuration:** DIP switches allow setting of baud rate, Modbus address, and protocol type without requiring configuration software. - **High Noise Immunity:** Meets IEC61000-4-4 EFT Level 3 and IEC61000-4-2 ESD Level 3 standards. - **Reset to Factory Defaults:** DIP switch function allows quick restoration of default settings.

Manufacturer: Sunix

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Differential RTD Channels:** Supports 8 fully isolated differential input channels for high-accuracy temperature measurement. - **Wide Sensor Compatibility:** Compatible with Pt100, Pt1000, Cu50, Cu100, and Ni120 RTD types, covering a broad range of industrial sensing applications. - **High Precision and Resolution:** 16-bit A/D conversion with 0.1°C resolution and ±0.1°C accuracy for platinum sensors. - **Inherent 3-Wire Compensation:** Built-in 3-wire lead compensation ensures accurate readings by automatically correcting for lead resistance. - **Fast Conversion Rate:** 140 ms per channel conversion time, suitable for real-time monitoring. - **Robust Electrical Protection:** 100 V input protection and 3 kV isolation between communication, logic, and field sides. - **Industrial Communication:** Standard Modbus RTU/ASCII protocol over RS-485 (3-wire) interface, supporting up to 63 modules on a single network without a repeater. - **High Noise Immunity:** Meets IEC61000-4-4 EFT Level 3 and IEC61000-4-2 ESD Level 3 standards for electromagnetic compatibility. - **User-Friendly Indicators:** LED indicators for power, communication (TX/RX), I/O activity, and termination resistor status. - **Flexible Mounting:** DIN-rail mountable with compact dimensions (132 × 125 × 47.5 mm). - **Wide Operating Range:** Designed for harsh industrial environments with an operating temperature range of -30°C to +75°C. - **Dual Watchdog System:** Hardware and communication watchdogs ensure continuous operation and fail-safe behavior.

Manufacturer: Sunix

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Multi‑Channel Input:** 8 analog input channels (6 differential, 2 single‑ended) for simultaneous multi‑point temperature or voltage measurement. - **Thermocouple Compatibility:** Supports J, K, T, E, R, S, B, N, and C thermocouple types, covering temperature ranges from ‑270 °C to +2320 °C. - **High‑Resolution Conversion:** 16‑bit A/D resolution ensures precise measurement of low‑level thermoelectric voltages. - **Cold Junction Compensation (CJC):** On‑board CJC sensor with enable/disable control for accurate thermocouple temperature readings. - **Wide Input Range:** Programmable voltage ranges of ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, and ±2.5 V; current measurement 0–20 mA (via external 125 Ω resistor). - **Electrical Isolation:** 2500 V RMS isolation between input channels and communication circuitry for noise immunity and safety. - **Sampling Rate:** 3 samples per second per channel, suitable for slow‑changing process variables. - **RS‑485 Networking:** Two‑wire, half‑duplex communication supporting up to 128 modules per bus segment and 256 addressable modules in a network. - **Programmable Configuration:** Software‑configurable input type, range, baud rate, and data format via ASCII command set. - **Watchdog Protection:** Internal watchdog timer for device self‑recovery and host watchdog for fail‑safe output control. - **Industrial Design:** Compact, DIN‑rail or panel‑mountable ABS enclosure with screw‑terminal connectors for secure wiring. - **ADAM‑4018 Compatibility:** Drop‑in replacement for existing ADAM‑4018 installations, ensuring interoperability.

Manufacturer: Adlink Technology Inc.

Category: RS485 DIN Rail IO Modules

- **Eight Differential Thermistor Channels:** Supports 10K Type II and 10K Type III thermistors for precise temperature measurement. - **Wide Measurement Range:** -45°C to +140°C, suitable for environmental, process, and equipment monitoring. - **High Resolution and Accuracy:** 0.1°C resolution with ±0.5°C accuracy ensures reliable thermal data acquisition. - **16-bit A/D Conversion:** Provides fine measurement granularity with 140 ms per channel conversion rate. - **Industrial-Grade Isolation:** 3-way isolation (RS-485, field-to-logic, and channel-to-channel) rated at 3000 Vrms for noise immunity and safety. - **Built-in Hardware Watchdog:** Ensures continuous operation and automatic recovery from communication or hardware faults. - **Standard Modbus RTU/ASCII Protocol:** Compatible with most SCADA and PLC systems, including Wonderware, LabView, and Citect. - **DIN-Rail Mountable Compact Design:** 132 × 125 × 47.5 mm enclosure for easy integration into control panels. - **User-Friendly LED Indicators:** Power, communication, and I/O status LEDs for quick diagnostics. - **High Noise Immunity:** Meets IEC61000-4-4 EFT Level 3 and IEC61000-4-2 ESD Level 3 standards. - **Flexible Configuration:** DIP switches for baud rate, address, and protocol selection; no software required for basic setup. - **Network Scalability:** Supports up to 63 modules on a single RS-485 bus without repeaters (up to 4000 ft).

Manufacturer: Sunix

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Relay Output Channels:** Each channel provides an independent relay output capable of switching AC or DC loads. - **8 Isolated Digital Input Channels:** Optically isolated inputs protect the system from voltage spikes, ground loops, and electrical noise. - **High Isolation Voltage:** Optical isolation between input and output channels ensures safe operation and signal integrity. - **Industrial-Grade Design:** Built for continuous operation in industrial environments with robust PCB design and high-quality components. - **Flexible Control Interface:** Compatible with standard digital I/O control libraries and software APIs for easy integration into automation systems. - **LED Status Indicators:** Each channel includes an LED indicator for visual confirmation of relay activation and input signal status. - **DIN-Rail or Chassis Mounting Options:** Suitable for installation in control cabinets or industrial enclosures. - **Wide Operating Voltage Range:** Supports typical industrial control voltages for both input and output circuits. - **Long Relay Life:** Mechanical relays rated for high switching cycles, ensuring long-term reliability. - **Software Compatibility:** Supported by common industrial control software and drivers for Windows and Linux environments.

Manufacturer: Adlink Technology Inc.

Category: OEM Add On Cards

- **8 Independent Analog Output Channels:** Each channel can be individually configured for output range and mode, providing flexibility for multi-signal generation and control applications. - **High-Speed Conversion:** Maximum conversion rate of 10 µs per channel (100 kS/s), enabling precise and rapid analog signal generation. - **12-bit Resolution:** Ensures fine granularity and accuracy in analog output, suitable for control, simulation, and waveform generation tasks. - **Software-Selectable Output Ranges:** Supports ±10 V, ±5 V, and 0–10 V ranges, configurable per channel via software. - **Dual Output Modes:** - *Transparent Output Mode* – updates only the specified channel. - *Synchronous Output Mode* – updates all channels simultaneously. - **Sampling Clock Flexibility:** - Internal clock adjustable from 10,000 ns to 1,073,741,824,000 ns in 250 ns increments. - External clock synchronization via TTL-level falling edge input. - **Programmable Timer Function:** Adjustable from 500 ns to 1,073,741,824,000 ns in 250 ns increments, with status monitoring for count-up and overrun conditions. - **Safety Power-On Design:** Automatically sets all output voltages to 0 V at power-on to prevent device malfunction or damage. - **Comprehensive Software Support:** Compatible with Windows (API-AIO(WDM)/API-AIO(98/PC)), Linux (API-AIO(LNX)), and LabVIEW (VI-DAQ). - **Compact and Lightweight:** 176.41 mm × 105.68 mm, approximately 135 g. - **PCI Bus Compatibility:** 32-bit, 33 MHz PCI interface supporting universal key shapes (5 V signaling). - **Regulatory Compliance:** CE and VCCI certified for electromagnetic compatibility and safety.

Manufacturer: Contec

Category: D/A General Purpose PCI

- **8 Analog Output Channels:** Each channel supports independent configuration for voltage or current output modes. - **12-bit Resolution:** Ensures fine granularity and precision in analog signal generation. - **Sampling Rate:** Up to **15 kS/s (15,000 samples per second)** per channel, suitable for medium-speed control and waveform generation applications. - **Double-Buffered Architecture:** Each DA channel includes a double-buffered output register, allowing seamless data updates without output glitches. - **Selectable Output Ranges:** - Voltage output: ±5 V, ±10 V, 0–5 V, 0–10 V - Current output: 4–20 mA (sink mode) Each channel can be individually configured for the desired range. - **Fast Output Response:** Typical update time of **

Manufacturer: No category

Category: D/A General Purpose ISA

- **8 Analog Output Channels:** Supports both voltage and current output modes. - **High Resolution:** 16-bit D/A resolution for precise analog signal generation. - **Programmable Output Ranges:** - Voltage: ±10 V - Current: 0–20 mA, 4–20 mA, 5–25 mA - **Fast Settling Time:** 17 µs typical for current output (20 mA step), 130 µs typical for voltage output (20 V step). - **High Slew Rate:** 26 V/µs (voltage), 1.3 mA/µs (current). - **Integrated DC/DC Converter:** Provides isolated power for stable analog performance. - **Digital I/O Support:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **CompactPCI Bus Interface:** 32-bit, 3U Eurocard form factor, PICMG 2.0 R2.1 compliant. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **High Accuracy:** Gain error ±0.2% (voltage), span error ±0.3% (current). - **Monotonicity:** 15-bit typical for voltage, 14-bit typical for current. - **Output Drive Capability:** ±5 mA maximum for voltage outputs. - **Compact Form Factor:** 3U Eurocard (100 mm × 160 mm).

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PXI/cPCI

- **High-Resolution Analog Output:** 8 independent 16-bit D/A channels with ±10 V bipolar output range. - **Fast Response:** Typical settling time of 130 µs for a 20 V step and a slew rate of 26 V/µs. - **CompactPCI Interface:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, 3U Eurocard form factor. - **Integrated Digital I/O:** 4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels. - **High Accuracy:** Gain error ±0.2% maximum, differential nonlinearity (DNL) ±1 LSB typical. - **Output Drive Capability:** ±5 mA maximum per channel. - **Plug and Play Configuration:** Automatic resource assignment via PCI Plug and Play BIOS. - **Software Support:** Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Calibration and Utility Tools:** Factory-calibrated with precision DMM; includes DOS-based utility for function testing and calibration. - **Robust Design:** Industrial-grade operating temperature range (0°C to 50°C) and humidity tolerance (5–95% non-condensing).

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PXI/cPCI

- **High-Resolution Analog Output:** 8 independent 16-bit digital-to-analog (D/A) channels with ±10 V bipolar output range and 15-bit guaranteed monotonicity. - **Rear I/O Configuration:** Rear I/O interface for CompactPCI backplane integration, enabling clean front-panel design and simplified cabling. - **Fast Response and Accuracy:** Typical settling time of 130 µs for a 20 V step and a typical slew rate of 26 V/µs, ensuring precise and rapid signal generation. - **Integrated DC/DC Converter:** Provides stable power isolation and improved noise immunity for industrial environments. - **Digital I/O Support:** 4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels for auxiliary control and monitoring. - **CompactPCI Compliance:** 3U Eurocard form factor, fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Software and OS Compatibility:** Supports Windows 7/8 (x86/x64) and Linux operating systems. Compatible with LabVIEW™, MATLAB®, Visual Studio.NET, C/C++, and Visual Basic. - **Plug and Play Configuration:** Automatic resource allocation via PCI Plug and Play BIOS, eliminating manual jumper or switch settings. - **High Reliability:** Designed for industrial-grade operation with wide temperature and humidity tolerance.

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PXI/cPCI