- **4 Isolated Digital Inputs (Dry/Wet selectable):** Supports both dry contact (mechanical switch) and wet contact (voltage signal) modes. - **4 Isolated NPN Digital Outputs:** Open‑collector transistor outputs for direct control of external devices. - **RS‑485 Communication Interface:** Standard Modbus RTU protocol for seamless integration with PLCs, PACs, and SCADA systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored via EEPROM. - **EEPROM Parameter Backup:** Non‑volatile memory stores configuration and calibration data for easy module replacement. - **Programmable Power‑On and Safety Values:** Ensures safe startup and fail‑safe operation during communication loss. - **Isolation Protection:** 2.5 kV isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact Design:** 100 × 95 mm footprint, 20 mm slim width for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick troubleshooting. - **Industrial‑Grade Reliability:** Operating temperature −25 °C to +70 °C; humidity 5–95 % RH. - **Low Power Consumption:** 1.6 W @ 24 VDC typical. - **Modbus Node Address via Rotary Switches:** Hardware address setting without software tools. - **Watchdog Timers:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **DIN‑Rail or Wall Mounting:** Flexible installation options with detachable base and pin‑array connectors. - **5‑Year Warranty:** Long‑term reliability assurance for industrial deployments.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Dual Functionality:** 4 isolated digital inputs and 5 relay outputs (Form A, normally open). - **Communication Interface:** RS-485, 2-wire, supporting Modbus RTU protocol. - **High Channel Isolation:** 3750 Vrms isolation for inputs and 4000 V surge strength for outputs. - **Relay Output Capacity:** Each relay channel supports up to **5A at 250 VAC** or **5A at 30 VDC**. - **Wide Power Supply Range:** Operates from **+10 VDC to +30 VDC**, allowing flexible power integration. - **LED Indicators:** 11 status LEDs for real-time monitoring of input/output states. - **Extended Temperature Range:** Reliable operation from **-25°C to +75°C**. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system safety. - **Galvanic Isolation:** Complete isolation between input, output, and communication circuits for noise immunity. - **Compact and Durable Design:** Built for industrial environments with high electrical noise and temperature variations. - **Modbus RTU Compatibility:** Fully compliant with Modbus RTU standard for easy integration with PLCs, SCADA, and HMI systems. - **EEPROM Configuration Storage:** Retains configuration data such as address, baud rate, and protocol settings even after power loss. - **Manual or Software Configuration:** Supports both hardware-based INIT* mode and software configuration commands.

Manufacturer: TOPSCCC

Category: Modules Relay

- **Four Isolated GPIO Channels:** Provides four independent, optically isolated digital I/O channels for enhanced signal integrity and protection against electrical noise and surges. - **Seamless Integration with RTV‑24:** Designed as a plug‑in extension board for the ADLINK RTV‑24 frame grabber, extending its I/O functionality without additional interface hardware. - **TTL‑Compatible Logic Levels:** Supports standard 5 V TTL logic for compatibility with a wide range of industrial sensors, actuators, and control devices. - **Bidirectional Configuration:** Each GPIO line can be configured as input or output, allowing flexible control and monitoring setups. - **Electrostatic and Overload Protection:** Built‑in protection circuitry ensures reliable operation in electrically noisy environments. - **Software‑Configurable I/O:** Fully programmable through ADLINK’s ViewCreator utility and the AngeloRTV API library. - **Real‑Time Triggering Support:** Enables hardware and software triggers for synchronized image capture and external event control. - **Compact Form Factor:** Small, lightweight board designed for internal installation within PC‑based vision systems. - **Industrial Reliability:** Designed for continuous operation in surveillance, machine vision, and automation environments.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Embedded DOS System:** Runs Datalight ROM-DOS with miniBIOS for stable, low-level control and compatibility with legacy DOS applications. - **CPU:** Intel 80188 processor operating at 40 MHz, optimized for embedded control and communication tasks. - **Memory:** 512 KB SRAM and 512 KB Flash memory for program and data storage. - **Interfaces:** - 4 × RS-232 serial ports - 1 × RS-485 port with automatic direction control - 1 × 10Base-T Ethernet port (RJ-45 connector) - **Real-Time Clock (RTC):** Integrated RTC for time-dependent operations and data logging. - **Fanless Design:** Passive cooling ensures silent operation and high reliability in industrial environments. - **Rugged Construction:** Compact, vibration-resistant housing suitable for DIN-rail or panel mounting. - **Wide Temperature Range:** Designed for industrial temperature conditions (exact range depends on configuration). - **Virtual COM Port Support:** VSP/VirCOM software enables transparent Ethernet-to-serial communication, allowing legacy COM-based applications to operate over TCP/IP without modification. - **Built-in 5-Digit LED Display:** Provides real-time system and communication status, including IP address, baud rate, and COM port configuration. - **Network Integration:** Functions as a serial-to-Ethernet converter, enabling centralized control of distributed RS-232/RS-485 devices. - **Software Utilities:** Includes a suite of configuration and diagnostic tools such as Infoset.exe, Xcom.exe, NetTest, and ROMDISK utilities.

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232

- **Embedded DOS System:** Runs Datalight ROM-DOS with MiniBIOS for stable, low-level operation without the need for full PC BIOS support. - **CPU:** Intel 80188 processor operating at 40 MHz, optimized for embedded control and communication tasks. - **Memory:** - 512 KB Static RAM (SRAM) - 512 KB Flash memory for program and data storage - NVRAM and serial EEPROM for configuration and persistent data - **Interfaces:** - 4 × RS-232 serial ports - 1 × RS-485 port with automatic direction control - 1 × 10Base-T Ethernet port (RJ-45 connector) - **Display:** Integrated 5-digit 7-segment LED display for system status and configuration feedback. - **Real-Time Clock (RTC):** Maintains accurate timekeeping for scheduling and logging. - **Fanless Design:** Ensures silent operation and high reliability in industrial environments. - **Wide Temperature Range:** Designed for operation in demanding industrial conditions. - **Compact and Robust Enclosure:** Resistant to vibration and mechanical shock, suitable for DIN-rail or panel mounting. - **Virtual COM Port Support:** Through VSP/VirCOM software, allows Ethernet-connected devices to appear as local COM ports on a PC. - **Network Integration:** Functions as an RS-232/RS-485 to Ethernet converter, enabling remote serial device management over LAN. - **Software Utilities:** Includes tools for configuration, file transfer, ROM updates, and diagnostics (e.g., XM.EXE, TOROM.EXE, INFOSER.EXE, XPING.EXE).

Manufacturer: TOPSCCC

Category: Modules Ethernet/RS485/RS232

- **Multi-Port Serial Communication:** Equipped with four RS-232 ports and one RS-485 port, enabling simultaneous communication with multiple serial devices. - **High Memory Capacity:** Includes 512 KB Flash memory and 512 KB SRAM for program storage, data buffering, and real-time processing. - **Real-Time Clock (RTC):** Integrated RTC ensures accurate timekeeping for event logging, scheduling, and time-based control operations. - **7-Segment Display:** Built-in 7-segment LED display provides immediate visual feedback for status monitoring, diagnostics, and configuration. - **Modbus Protocol Support:** Fully supports Modbus communication (RTU/TCP), ensuring compatibility with a wide range of industrial automation systems and SCADA platforms. - **Industrial-Grade Design:** Engineered for stable operation in harsh industrial environments, with robust electrical isolation and noise immunity. - **Flexible Integration:** Designed for use in distributed control systems, data acquisition networks, and serial device servers. - **Compact and Modular Form Factor:** Space-efficient design suitable for DIN-rail or panel mounting in control cabinets.

Manufacturer: TOPSCCC

Category: Modules Ethernet/Modbus

- **Multi-Port Serial Communication:** Equipped with four independent RS-232 ports and one RS-485 port, allowing simultaneous communication with multiple serial devices such as PLCs, sensors, HMIs, and controllers. - **High Memory Capacity:** Integrated 512 KB Flash memory and 512 KB SRAM for data storage, buffering, and program execution, ensuring stable operation even under high data throughput conditions. - **Real-Time Clock (RTC):** Built-in RTC for accurate time-stamping of data logs, event tracking, and synchronization with other networked devices. - **Modbus Protocol Support:** Full support for Modbus RTU/ASCII communication, enabling seamless integration into existing Modbus-based automation systems. - **Industrial-Grade Design:** Engineered for continuous operation in harsh environments, with robust electrical isolation, surge protection, and wide temperature tolerance. - **Flexible Configuration:** Supports multiple baud rates, parity settings, and communication parameters for versatile deployment across various industrial communication standards. - **Compact and Modular:** Designed for DIN-rail or panel mounting, optimizing space utilization in control cabinets and distributed I/O systems. - **High Reliability:** Non-volatile memory ensures data retention during power loss, while watchdog timers and error detection mechanisms enhance system stability.

Manufacturer: TOPSCCC

Category: Modules Ethernet/Modbus

- **Four Independent Communication Ports:** Each of the four ports can be individually configured for RS232, RS422, or RS485 operation using DIP switches. - **Full Electrical Isolation:** Every port is galvanically isolated from the others and from the host system ground, preventing ground loops and protecting against electrical surges. - **Mixed‑Mode Operation:** Supports simultaneous use of different interface standards across ports (e.g., two RS232 and two RS485). - **Selectable Impedance and Termination:** Jumper‑selectable impedance settings for RS422/RS485 modes allow proper line termination and signal integrity over long cable runs. - **Built‑In Power Supply:** Integrated universal power supply accepts **90–260 VAC** or **–48 VDC** input, eliminating the need for external adapters. - **Status Indication:** Each port includes **TXD/RXD LED indicators** for real‑time monitoring of transmit and receive activity. - **Flexible Connectivity:** Input via **DB37 male connector**; output via four **DB25 male connectors** (one per port). - **Compact Industrial Enclosure:** Rugged metal housing with dimensions **298 × 135 × 55 mm**, suitable for rack or panel mounting. - **Auto Data Direction Control (RS485):** Built‑in automatic data direction management ensures half‑duplex RS485 communication without manual RTS control. - **Compatibility:** Designed for use with RAYON PCIPORT four‑port PCI cards (P584/P485/P984/P524U series) through A640 or equivalent cables.

Manufacturer: Rayon

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Four Independent Serial Ports:** The CI-134 provides four RS-422/485 ports, allowing simultaneous communication with multiple serial devices. - **High-Speed Data Transmission:** Supports baud rates from 50 bps to 921,600 bps (921.6 kbps), ensuring compatibility with both legacy and modern serial devices. - **Auto Data Direction Switching:** Built-in automatic data direction control for RS-485 communication eliminates the need for manual RTS signal handling, simplifying software development and improving communication reliability. - **Flexible Interrupt Configuration:** Supports IRQ 2–5, 7, 10–12, and 15, allowing flexible resource allocation and minimizing conflicts with other system devices. - **Standard Interface Connectors:** Each port uses a male DB9 connector, ensuring compatibility with standard serial cables and accessories. - **Compact Form Factor:** The board measures 157 mm × 83 mm, suitable for installation in standard PC expansion slots. - **Industrial Reliability:** Designed for stable operation in industrial environments, with robust electrical design and high noise immunity. - **Wide Compatibility:** Compatible with a range of operating systems and industrial control software, supporting both RS-422 and RS-485 communication modes. - **Hardware Flow Control:** Supports hardware-based flow control for reliable data transmission in multi-drop or point-to-point configurations. - **Ease of Integration:** Ideal for connecting PLCs, sensors, controllers, and other serial devices to PC-based control systems.

Manufacturer: Moxa

Category: RS485 / RS422 4-Po

- **Four Isolated Serial Ports:** Provides 4 independent RS-422/485 ports for simultaneous multi-device communication. - **2 kV Isolation Protection:** Each port is optically isolated up to 2 kV, protecting connected devices and the host system from electrical surges, ground loops, and transient voltage spikes. - **Integrated Surge Protection:** Built-in surge suppression safeguards against voltage transients and electrostatic discharge (ESD), enhancing long-term reliability in industrial environments. - **High-Speed Data Transmission:** Supports baud rates from 50 bps up to 921.6 kbps, enabling fast and stable data exchange for high-throughput applications. - **Auto Data Direction Control:** Intelligent automatic data direction switching for RS-485 communication eliminates the need for manual RTS signal control, simplifying software development and ensuring efficient half-duplex communication. - **Flexible Interrupt Configuration:** Supports multiple IRQ settings (2–5, 7, 10–12, 15), allowing flexible resource allocation and compatibility with various PC architectures. - **Standard Interface Connectors:** Equipped with four male DB9 connectors for direct connection to serial devices. - **Compact Form Factor:** Designed with a compact PCB footprint (157 × 83 mm), suitable for installation in standard PC slots. - **Wide Compatibility:** Compatible with a broad range of operating systems and industrial communication protocols, making it ideal for integration into legacy and modern systems alike. - **Industrial-Grade Reliability:** Engineered for continuous operation in harsh industrial conditions, ensuring stable performance and long service life.

Manufacturer: Moxa

Category: RS485 / RS422 4-Po

- **Four Independent Serial Ports:** Provides 4 isolated RS-422/485 ports for simultaneous multi-device communication. - **High-Speed Data Transmission:** Supports baud rates from 50 bps up to 921.6 kbps, enabling fast and reliable data exchange. - **2 kV Isolation Protection:** Each port is optically isolated up to 2,000 V, protecting the system from electrical surges, ground loops, and signal interference. - **ADDS (Automatic Data Direction Switching):** Built-in automatic data direction control for RS-485 communication eliminates the need for manual RTS signal handling, simplifying software development and ensuring efficient half-duplex communication. - **Flexible Interrupt Configuration:** Supports IRQ 2–5, 7, 10–12, and 15, allowing flexible resource allocation and compatibility with various PC architectures. - **Standard Interface Connectors:** Equipped with male DB9 connectors for each port, ensuring compatibility with standard serial cables and devices. - **Compact Form Factor:** The board measures 157 mm × 83 mm, suitable for installation in standard PC slots without occupying excessive space. - **Industrial Reliability:** Designed for continuous operation in demanding environments, with robust electrical isolation and stable performance under industrial conditions. - **Wide Compatibility:** Compatible with a broad range of operating systems and industrial applications requiring RS-422/485 communication.

Manufacturer: Moxa

Category: RS485 / RS422 4-Po

Industrial Ethernet Device Server 1*10/100 TX to Serial 4*USB 1.0/1.1/2.0, event warning by syslog/email/SNMP trap/Relay/beeper, fixed TTY driver for Linux, Ethernet redundancy and recovery time

Manufacturer: Oring

Category: Industrial USB

4-CH 14-bit simultaneous-sampling PCI DAQ card up to 2 MS/s

PCI DAQ card with 4 differential simultaneous-sampling analog inputs, 14-bit resolution, up to 2 MS/s, 2-channel 12-bit analog output, 24-bit 8255 programmable digital I/O, and 2-channel 16-bit timer/counter. Supports software, external digital/analog trigger, and SSI bus.

Manufacturer: Adlink Technology Inc.

Category: No category

4-CH 16-bit simultaneous-sampling PCI DAQ card up to 250 kS/s

PCI DAQ card with 4 differential simultaneous-sampling analog inputs, 16-bit resolution with no missing codes, up to 250 kS/s, 2-channel 12-bit analog output, 24-bit 8255 programmable digital I/O, and 2-channel 16-bit timer/counter. Supports software, external digital/analog trigger, and SSI bus.

Manufacturer: Adlink Technology Inc.

Category: No category

4-CH 16-bit simultaneous-sampling PCI DAQ card up to 500 kS/s

PCI DAQ card with 4 differential simultaneous-sampling analog inputs, 16-bit resolution with no missing codes, up to 500 kS/s, 2-channel 12-bit analog output, 24-bit 8255 programmable digital I/O, and 2-channel 16-bit timer/counter. Supports software, external digital/analog trigger, and SSI bus.

Manufacturer: Adlink Technology Inc.

Category: No category

- **Four‑Channel Real‑Time MPEG‑4 Hardware Encoding:** Supports simultaneous capture and compression of four analog video inputs at full D1 resolution (NTSC 640×480 @ 30 fps × 4 = 120 fps total; PAL 768×576 @ 25 fps × 4 = 100 fps total). - **Adjustable Video Quality and Bitrate Control:** Programmable GOP structures (I, IP, IBP, IBBP) with constant or variable bitrate (CBR/VBR) from 1 Kbps to 40 Mbps. Frame and bit rates can be tuned for bandwidth‑limited or remote streaming environments. - **Real‑Time Raw Data Preview:** Hardware‑assisted live preview in single‑channel full‑D1 or four‑channel quad‑display mode without CPU overhead. - **Integrated Video Decoder and Playback Support:** Software decoding for playback or remote monitoring without requiring the PCI‑MPG24 card installed on the client system. - **AVI File Recording:** Encoded streams can be saved directly to standard AVI containers for playback in Microsoft Media Player or other DirectShow‑compliant players. - **TTL‑Compatible Digital I/O:** Four TTL inputs and four outputs for event triggering, alarm signaling, or external device control. Over‑voltage and ESD protection included. - **Hardware Watchdog Timer:** Monitors host application activity and automatically resets the system after a programmable timeout—ideal for unattended or remote installations. - **On‑Board Memory:** 64 MB SDRAM buffer for frame storage and smooth streaming. - **User EEPROM:** 1 Kbit non‑volatile memory for integrator‑defined data or system identification. - **Software Support:** Microsoft DirectX 9.0, Visual Studio .NET, VC++, Borland C++ Builder; sample applications and the “ViewCreator” utility included. - **Operating System Compatibility:** Windows 2000 Professional (SP4) and Windows XP Professional (SP2).

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **4‑Channel RTD Input:** Supports four independent RTD sensor channels for simultaneous temperature measurement. - **Sensor Compatibility:** Compatible with PT100, PT500, and PT1000 platinum RTDs. - **Wiring Flexibility:** Supports 2‑wire, 3‑wire, and 4‑wire measurement configurations for optimal accuracy and noise immunity. - **High Resolution:** 24‑bit A/D conversion ensures precise temperature readings and fine measurement granularity. - **Sampling Rate:** Adjustable between 5 Hz and 20 Hz, balancing response time and accuracy. - **Wide Temperature Range:** Measures from ‑200 °C to +850 °C, suitable for a broad range of industrial processes. - **High Accuracy:** ±0.007 % of full‑scale range (FSR) DC accuracy and ±0.5 °C temperature accuracy. - **Excitation Current:** Up to 500 µA per channel for stable RTD excitation. - **Electrical Isolation:** 2 kV DC isolation between channels and ground, ensuring signal integrity and protection against electrical noise. - **Hot‑Swappable:** Can be replaced or added without powering down the EPS system, minimizing downtime. - **Compact Form Factor:** 100 mm (L) × 100 mm (H) module size for dense system integration. - **Wide Operating Temperature:** Reliable operation from ‑20 °C to +60 °C. - **Quick‑Removable Connector:** Uses Phoenix Contact DFMC series connectors for easy installation and maintenance. - **IEC 61131 Compliance:** Meets international industrial control standards for programmable automation systems. - **Slave Module Health Monitoring:** Integrated diagnostics for module presence, power status, and over‑temperature protection. - **EtherCAT Integration:** Fully compatible with ADLINK’s EPS‑6000 bus coupler and third‑party EtherCAT masters via ESI files generated by LinkMasterPro™.

Manufacturer: No category

Category: Modules

- **Four‑Circuit Power Measurement:** Simultaneous monitoring of up to four independent electrical circuits, enabling multi‑channel energy management within a single compact module. - **Wide Current Clamp Range:** Compatible with external current clamps rated for 5 A, 60 A, 100 A, 200 A, 300 A, 400 A, and 600 A primary current, allowing flexible deployment across low‑ and high‑current systems. - **High‑Speed Modbus RTU Communication:** RS‑485 interface supporting baud rates from 1200 bps to 115 200 bps for integration with PLCs, SCADA, and energy management systems. - **Multi‑Parameter Data Acquisition:** Capable of recording up to 50 electrical parameters simultaneously, including voltage, current, power factor, frequency, and energy consumption. - **Compact, Space‑Saving Design:** Slim vertical housing (129.6 × 135 × 47.2 mm) optimized for DIN‑rail or wall mounting; up to 1.5 times more modules can be installed in the same space compared with conventional flat‑type I/O devices. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments with isolation protection up to 3000 V DC, watchdog timers, and programmable safe‑state outputs. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC (typical 24 V DC), consuming approximately 5 W; reverse‑polarity protection included. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration data; modules can be replaced without re‑wiring or re‑programming. - **Ease of Installation and Maintenance:** Front‑facing terminal blocks, rotary address switches, and LED status indicators simplify setup, diagnostics, and field servicing. - **Extended Environmental Range:** Operating temperature –25 °C to +70 °C; humidity 5 % to 95 % RH (non‑condensing). - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty covering defects under normal industrial use.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **4-pin D-coded M12 male connector:** Designed for 100 Mbps Fast Ethernet and industrial communication networks. - **IDC (Insulation Displacement Connection) termination:** Enables fast, reliable, and solder-free wire connection. - **Rugged construction:** Built to withstand vibration, moisture, dust, and mechanical stress typical in industrial environments. - **IP67-rated protection:** Ensures complete protection against dust ingress and temporary immersion in water. - **Field-assembly design:** Allows on-site cable termination without specialized tools or factory pre-molding. - **D-coding for Ethernet applications:** Supports 100BASE-TX Ethernet communication, ensuring secure data transmission. - **Compact and standardized form factor:** Compatible with M12 D-coded sockets and cables used in industrial automation, sensors, and control systems. - **High mechanical durability:** Threaded coupling mechanism ensures secure mating and resistance to vibration. - **Temperature and chemical resistance:** Suitable for use in demanding industrial and outdoor environments. - **Compliance with international standards:** Meets IEC and ISO specifications for industrial connectors.

Manufacturer: Oring

Category: M12 Cable

- **4-Pin D-Coded Configuration:** Optimized for 100 Mbps Fast Ethernet communication, ensuring reliable data transmission in industrial networks. - **Male Plug, Soldering Type:** Designed for direct solder termination, providing a secure and permanent electrical connection. - **Rugged Industrial Design:** Built to withstand vibration, shock, and environmental stress typical of industrial and outdoor installations. - **IP67 Protection (when mated):** Ensures dust-tight and water-resistant performance, suitable for washdown and outdoor applications. - **Compact and Standardized M12 Interface:** Conforms to IEC 61076-2-101 standards for M12 connectors, ensuring interoperability with other compliant devices. - **High Mechanical Durability:** Threaded coupling mechanism provides a secure lock, preventing accidental disconnection. - **Wide Operating Temperature Range:** Suitable for use in both standard and industrial-grade environments. - **Corrosion-Resistant Materials:** Nickel-plated brass or stainless-steel housing options ensure long-term reliability in corrosive or humid conditions. - **Ease of Assembly:** The soldering type design allows for straightforward field assembly and maintenance. - **Compatibility with ORing Accessories:** Fully compatible with ORing’s M12 Ethernet cables, power supplies, and RF accessories for integrated system deployment.

Manufacturer: Oring

Category: M12 Cable

- **High‑Performance Fiber Connectivity:** Provides four independent 1000Base‑FX multi‑mode fiber ports with SC connectors, supporting full‑duplex Gigabit Ethernet operation over optical fiber. - **Modular Integration:** Designed as a plug‑in module for the RGS‑9000 series chassis, allowing flexible configuration of up to four interface modules per switch (three 1G modules and one 10G module). - **Industrial‑Grade Design:** Built for harsh environments with extended operating temperature ranges (‑40 °C to 85 °C when no 10G module is installed, or ‑20 °C to 60 °C with 10G module present). - **High Reliability and Redundancy:** Fully compatible with ORing’s proprietary O‑Ring and O‑Chain redundancy technologies, providing network recovery times under 30 ms across up to 250 connected devices. - **Standards Compliance:** Conforms to IEEE 802.3z 1000Base‑X and IEEE 802.3x flow control standards, ensuring interoperability with standard Ethernet equipment. - **Ease of Maintenance:** Hot‑swappable module design simplifies installation and replacement without system downtime. - **Optimized for Industrial Applications:** Compliant with IEC 61850‑3 and IEEE 1613 standards for power automation and substation environments, ensuring electromagnetic and environmental robustness. - **Centralized Management:** Fully manageable through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s Open‑Vision network management software.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Performance Fiber Connectivity:** Four independent **1000Base‑FX single‑mode** fiber ports supporting full‑duplex Gigabit Ethernet transmission over long distances. - **Industrial‑Grade Design:** Engineered for use in **IEC 61850‑3** and **IEEE 1613** compliant environments, ensuring electromagnetic immunity and reliability in power automation and railway applications. - **Modular Integration:** Designed as a plug‑in module for the **RGS‑9000 Series** chassis, allowing flexible configuration of up to three Gigabit modules and one 10 G SFP+ module per switch. - **SC Optical Interface:** Equipped with four **SC‑type connectors** for single‑mode fiber, simplifying field installation and maintenance. - **Redundant Network Support:** Fully compatible with ORing’s proprietary **O‑Ring** and **O‑Chain** redundancy technologies, providing recovery times under **30 ms** across up to 250 nodes. - **Wide Temperature Operation:** Supports extended industrial temperature ranges from **–40 °C to +85 °C** (when no 10 G module is installed) or **–20 °C to +60 °C** (with 10 G module). - **Seamless Management Integration:** Managed through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s **Open‑Vision** centralized management software. - **High Reliability and Long‑Distance Transmission:** Single‑mode optical design supports transmission distances up to **10 km or more**, depending on fiber type and transceiver characteristics.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Four 100Base‑FX Multi‑Mode Fiber Ports:** Each port supports SC‑type connectors for multi‑mode fiber operation, providing reliable optical communication over distances up to 2 km (typical for 850 nm multi‑mode fiber). - **Modular Integration:** Designed for installation into the RGS‑9000 chassis, occupying one of the available interface slots. The modular design allows flexible combinations of copper, fiber, and 10 Gbit/s uplink modules. - **Industrial‑Grade Design:** Fully compliant with **IEC 61850‑3** and **IEEE 1613** standards for power substation and railway environments, ensuring electromagnetic immunity, vibration resistance, and extended temperature operation. - **High Network Reliability:** Supports ORing’s proprietary **O‑Ring** redundancy protocol with recovery times under **30 ms** across up to 250 nodes, as well as **MSTP**, **MRP**, and **O‑Chain** topologies for multi‑ring redundancy. - **Comprehensive Management:** Managed through the RGS‑9000’s web interface, CLI, Telnet, SNMP v1/v2c/v3, or ORing’s **Open‑Vision** centralized management software. - **Enhanced Security:** Supports HTTPS, SSH, RADIUS, TACACS+, 802.1X authentication, ACLs, and device binding for secure network access control. - **Energy‑Efficient Operation:** Incorporates IEEE 802.3az Energy‑Efficient Ethernet technology to reduce power consumption during low network activity. - **Wide Temperature Range:** Operates reliably from **‑40 °C to +85 °C** (depending on chassis configuration) for deployment in extreme industrial environments.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Industrial‑Grade Fiber Expansion:** Adds four 100Base‑FX single‑mode fiber ports to the RGS‑9000 chassis for extended optical connectivity. - **Connector Type:** SC single‑mode fiber interfaces for long‑haul communication. - **High Immunity to EMI/RFI:** Optical transmission eliminates electrical interference, ideal for substations and rolling stock. - **Modular Integration:** Hot‑swappable module compatible with RGS‑9000 Series managed switches. - **Redundant Networking Support:** Fully compatible with ORing’s **O‑Ring**, **O‑Chain**, and **MRP (IEC 62439‑2)** redundancy protocols, ensuring recovery times under 30 ms across up to 250 nodes. - **Layer 2/3 Managed Switch Compatibility:** Works within RGS‑9000 and RGS‑PR9000 chassis supporting advanced routing, VLAN, QoS, and security features. - **Wide Temperature Operation:** −40 °C to +85 °C (when installed in chassis without 10 G module). - **High Reliability:** Designed to meet **IEC 61850‑3** and **IEEE 1613** standards for power automation and railway applications. - **Centralized Management:** Configurable via Web GUI, Telnet, CLI, or ORing’s Open‑Vision management suite. - **Energy‑Efficient Ethernet:** Supports IEEE 802.3az for reduced power consumption. - **Security Integration:** Works with switch‑level ACLs, 802.1x, RADIUS/TACACS+, HTTPS/SSH, and device binding.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Triple Interface Support:** Each of the four ports can be individually configured as RS-232, RS-422, or RS-485, allowing mixed-mode operation on a single board. - **High-Speed Communication:** Supports data rates from 50 bps up to 921.6 Kbps, with selectable normal and high-speed spectra (up to 8× standard baud rates). - **Advanced UART Architecture:** Equipped with four 16C550C-compatible UARTs featuring 16-byte FIFO buffers for reliable high-speed asynchronous communication. - **Independent Configuration:** Each port supports independent I/O address and IRQ settings, ensuring compatibility with diverse system configurations. - **Isolation Protection:** Provides up to 2000 V isolation for RS-422/RS-485 interfaces, protecting against electrical surges and ground loops. - **Auto Data Direction Control:** RS-485 ports support automatic data direction switching, simplifying half-duplex communication. - **Flexible Bus Interface:** 16-bit ISA (EISA compatible) bus interface for legacy and industrial PC systems. - **Software Configurable:** On-board EEPROM stores configuration parameters accessible via Configuration Access Port (CAP). - **Comprehensive OS Support:** Compatible with Windows NT/95/98, DOS, Windows 3.x, Linux, SCO UNIX/XENIX, OS/2, QNX, FreeBSD, and other multiuser operating systems. - **Diagnostic and Development Tools:** Bundled with Moxa’s PComm library and utilities for diagnostics, monitoring, and application development. - **Industrial Reliability:** Designed for continuous operation in industrial environments with robust electrical and mechanical design.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI