- **High-Speed Analog Input:** - Sampling rate up to **90 kS/s** (kilosamples per second) for precise and rapid data acquisition. - **12-bit resolution** ensures accurate analog-to-digital conversion suitable for scientific and industrial measurements. - **Flexible Channel Configuration:** - Supports **16 single-ended (SE)** or **8 differential (DI)** analog input channels. - Programmable input configuration allows adaptation to various sensor and signal types. - **Programmable Input Ranges:** - Voltage input ranges: **±0.02 V, ±0.1 V, ±1 V, ±10 V** or **0–0.02 V, 0–0.1 V, 0–1 V, 0–10 V**. - **Programmable gain settings:** ×1, ×10, ×100, ×500. - Enables precise measurement of both low-level and high-level signals. - **Analog Output (D/A):** - **2 channels** of 12-bit digital-to-analog conversion. - Ideal for control signal generation, waveform output, or actuator control. - **Digital I/O:** - **8 TTL-compatible digital input/output lines** for general-purpose control and monitoring. - **Bus Interface:** - **AT ISA bus** interface for legacy and industrial PC systems. - **DMA channels 1 or 3** and **IRQ lines 2–15** selectable for flexible system integration. - **Software Support:** - Compatible with **Windows**, **BASIC**, **C**, and **Pascal** programming environments. - Includes driver libraries and sample code for rapid application development. - **Compatibility:** - **DAS-16G compatible**, ensuring interoperability with existing software and hardware ecosystems. - **Connector:** - **50-pin header connector** for analog and digital I/O connections. - **Compact Design:** - **Half-size AT card** form factor suitable for space-constrained systems.

Manufacturer: Axiom

Category: A/D General Purpose ISA

- **High-Speed 12-Bit A/D Conversion:** Equipped with a 12-bit analog-to-digital converter (AD774), the card achieves sampling rates up to 100,000 samples per second (100 kS/s), ensuring accurate and fast signal acquisition. - **Flexible Channel Configuration:** Supports 16 single-ended (SE) or 8 differential (DI) analog input channels. With the optional ATCH-16(PC) expansion module, the channel count can be doubled to 32 SE or 16 DI channels. - **Wide Input Voltage Range:** Configurable input ranges of ±10 V or 0–10 V, allowing compatibility with a variety of analog sensors and signal sources. - **Integrated FIFO Buffer:** Features a 256 k-word FIFO (First-In-First-Out) memory buffer or ring buffer for continuous, high-speed data streaming without data loss, even during intensive system operations. - **Intelligent Sampling ASIC:** Incorporates a dedicated ASIC for intelligent sampling control, optimizing timing accuracy and reducing CPU load during acquisition. - **Onboard D/A Conversion:** Includes one 12-bit digital-to-analog (D/A) output channel with selectable output ranges of ±10 V, 0–10 V, or ±5 V, and a conversion time of 6 µs, enabling precise analog output or waveform generation. - **DMA and Interrupt Support:** Compatible with DMA channels 5, 6, and 7, and interrupt request (IRQ) lines 5, 7, 9–12, and 15, providing flexible system integration and efficient data transfer. - **Digital I/O Capability:** Provides 4 TTL-level digital input and 4 TTL-level digital output lines for control and synchronization with external devices. - **Compact Form Factor:** Standard AT-bus card dimensions of 160 mm × 122 mm, suitable for installation in legacy or industrial PC systems. - **Robust Connectivity:** Equipped with a 37-pin female D-Sub connector and a 16-pin connector for analog and digital I/O interfacing.

Manufacturer: Contec

Category: A/D High Speed ISA

- **Bus Interface:** AT‑Bus (ISA) compatible. - **Analog Inputs:** 16 single‑ended channels (ACL‑8112PG model). - **Analog Outputs:** Two 12‑bit monolithic multiplying D/A channels with double buffering. - **Digital I/O:** 16 TTL‑compatible digital inputs and 16 TTL‑compatible digital outputs. - **Timer/Counter:** Three programmable 16‑bit down counters (Intel 8254 compatible). - **Sampling Rate:** Programmable up to 100 kHz. - **Resolution:** 12‑bit A/D and 12‑bit D/A conversion. - **Programmable Gain:** Five levels (×1, ×2, ×4, ×8, ×16); ×0.5 selectable via jumper. - **Trigger Modes:** Software, internal pacer (timer‑based), or external pulse trigger. - **Data Transfer Modes:** Polling, DMA, or interrupt‑driven. - **Interrupt Levels:** Selectable from IRQ3, 5–7, 9–12, or 15. - **DMA Channels:** Selectable between Channel 1 or Channel 3. - **Power Supply:** On‑board DC/DC converter for stable analog power. - **Connectors:** One 37‑pin D‑type female connector and two 20‑pin IDC headers. - **Form Factor:** Half‑size ISA card (163 mm × 123 mm). - **Software Support:** C‑language library, DOS utilities, and optional Windows SDK (ACLS‑DLL2) and LabVIEW driver (ACLS‑LVIEW).

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed ISA

- **Bus Interface:** Standard AT‑Bus (ISA) - **Analog Inputs:** 16 single‑ended or 8 differential channels - **Analog Outputs:** Two 12‑bit monolithic multiplying D/A channels, double‑buffered - **Digital I/O:** 16 digital inputs and 16 digital outputs, TTL/DTL compatible - **Resolution:** 12‑bit A/D and 12‑bit D/A - **Sampling Rate:** Up to 100 kS/s (single channel) - **Programmable Gain:** ×0.5, ×1, ×2, ×4, ×8 - **Input Range:** Bipolar ±10 V to ±0.625 V; Unipolar 0–10 V to 0–1.25 V - **Trigger Modes:** Software, internal pacer (timer), or external pulse trigger - **Data Transfer Modes:** Polling, DMA, or interrupt‑driven - **Timer/Counter:** Three programmable 16‑bit down counters (Intel 8254 compatible) - **Interrupts:** 9 selectable IRQ levels (IRQ3, 5–7, 9–12, 15) - **DMA Channels:** Selectable DMA 1 or DMA 3 - **Power Supply:** On‑board DC/DC converter for stable analog power - **Connectors:** One 37‑pin D‑type female (analog I/O, timer), two 20‑pin headers (digital I/O) - **Compact Design:** Half‑size PCB (162 mm × 115 mm) - **Software Support:** C‑language library, LabVIEW driver, and Windows DLL development kit (ACLS‑DLL2)

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed ISA

- **High‑Speed A/D Conversion:** 12‑bit resolution with up to 100 kS/s sampling rate using a Burr‑Brown ADS7804 or equivalent successive‑approximation ADC. - **Channel Configuration:** 16 single‑ended (SE) or 8 differential (DI) analog input channels, selectable via jumper (JP7). - **On‑Board FIFO Buffer:** 1K‑word FIFO memory for continuous, gap‑free data acquisition with half‑full and full interrupt flags. - **Programmable Gain Amplifier:** Software‑selectable gains of ×1, ×2, ×4, ×8 for input ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V. - **Triggering Flexibility:** Supports software, internal pacer (timer‑based), and external trigger modes for A/D conversion. - **Data Transfer Options:** Software polling, interrupt‑driven, FIFO polling, FIFO half‑full interrupt, or DMA (Direct Memory Access) transfer. - **Digital I/O:** 16 TTL‑compatible digital input and 16 TTL‑compatible digital output channels. - **Timer/Counter:** Three independent 16‑bit programmable down counters (Intel 8254 compatible) with a 2 MHz base clock; two cascaded for A/D pacer timing, one user‑programmable. - **Interrupt and DMA Support:** Selectable IRQ levels (3, 5–7, 9, 11, 12, 15) and DMA channels (5, 6, 7). - **Power and Stability:** On‑board DC/DC converter for stable analog power isolation from digital noise. - **Compact Design:** Half‑size ISA card (163 mm × 123 mm) with 37‑pin D‑type and dual 20‑pin IDC connectors. - **Software Support:** Includes DOS C/C++ library, Windows DLL (ACLS‑DLL2), and LabVIEW driver (ACLS‑LVIEW).

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed ISA

- **High‑Speed A/D Conversion:** 12‑bit successive‑approximation ADC (ADS7804 or equivalent) with up to 100 kHz sampling rate. - **Flexible Analog Input Configuration:** 16 single‑ended or 8 differential channels with programmable gain (×1, ×2, ×4, ×8) and bipolar input ranges of ±10 V, ±5 V, ±2.5 V, or ±1.25 V. - **On‑Board FIFO Buffer:** 1 K‑word FIFO memory for gap‑free, high‑speed data acquisition with half‑full and full interrupt flags. - **Dual 12‑bit D/A Outputs:** Two independent DAC2813 (or equivalent) channels, ±10 V or 0–10 V output range, 6 µs settling time, ±5 mA drive. - **Digital I/O:** 16 TTL‑compatible digital input/output lines for control and monitoring. - **Programmable Counter/Timer:** Intel 8254‑compatible 3×16‑bit counters with 2 MHz base clock; supports pacer triggering and event counting. - **DMA and Interrupt Support:** Supports DMA channels 5, 6, 7 and IRQ levels 3, 5–7, 9, 11, 12, 15 for efficient data transfer. - **Auto‑Scanning and Triggering:** Software, internal pacer, or external trigger modes; automatic channel scanning for sequential sampling. - **Integrated DC/DC Converter:** Provides stable analog power isolation from digital circuitry. - **Compact Half‑Size ISA Form Factor:** 163 mm × 123 mm PCB with 37‑pin D‑type and dual 20‑pin IDC connectors. - **Software Support:** Includes DOS C/C++ library, Windows DLL (ACLS‑DLL2), and LabVIEW driver (ACLS‑LVIEW).

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed ISA

- **Bus Interface:** AT‑Bus (ISA) - **Analog Inputs:** 16 single‑ended or 8 differential channels - **Analog Outputs:** Two 12‑bit double‑buffered D/A channels - **Digital I/O:** 16 digital inputs and 16 digital outputs (TTL/DTL compatible) - **Resolution:** 12‑bit A/D and 12‑bit D/A - **Sampling Rate:** Up to 100 kS/s (single channel) - **Programmable Gain:** - High‑gain programmable amplifier with 8 gain levels: ×0.5, ×1, ×5, ×10, ×50, ×100, ×500, ×1000 - **Input Range (Programmable):** - Bipolar: ±10V, ±5V, ±1V, ±500mV, ±100mV, ±50mV, ±10mV, ±5mV - Unipolar: 0–10V, 0–1V, 0–0.1V, 0–0.01V - **Trigger Modes:** Software, internal pacer (timer), or external trigger - **Data Transfer Modes:** Polling, DMA, or interrupt‑driven - **Timer/Counter:** - 8254 programmable interval timer with three 16‑bit counters - Two cascaded counters for A/D pacer (32‑bit timer, 2 MHz base) - One 16‑bit general‑purpose counter - **Interrupts:** 9 selectable IRQ levels (IRQ3, 5–7, 9–12, 15) - **DMA Channels:** Selectable CH1 or CH3 - **Power Supply:** On‑board DC/DC converter for stable analog power - **Connectors:** - 37‑pin D‑type female connector (analog I/O, counter/timer) - Two 20‑pin IDC connectors (digital I/O) - **Form Factor:** Half‑size ISA card (compact design) - **Software Support:** C‑language library, DOS utilities, LabVIEW driver, and Windows SDK (ACLS‑DLL2)

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed ISA

- **High‑Resolution Analog Input:** 16‑bit A/D conversion (ADS7805 or equivalent) with up to 100 kS/s sampling rate. - **Flexible Channel Configuration:** 16 single‑ended or 8 differential analog input channels. - **Programmable Gain:** x1, x2, x4, x8 for input ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V. - **On‑Board FIFO Buffer:** 1K‑word FIFO memory with half‑ and full‑ready interrupt flags for continuous data streaming. - **Dual Analog Outputs:** Two 12‑bit D/A channels (DAC2813 or equivalent) with bipolar/unipolar ranges (±10 V or 0–10 V). - **Digital I/O:** 16 TTL‑compatible digital input and 16 digital output channels. - **Programmable Counter/Timer:** Three independent 16‑bit down counters (Intel 8254 compatible) with 2 MHz base clock. - **Trigger Flexibility:** Software, internal pacer, and external trigger modes. - **DMA and Interrupt Support:** DMA channels 5, 6, or 7; IRQ levels 3, 5–7, 9, 11, 12, 15. - **Auto‑Scanning:** Hardware channel auto‑scan for sequential sampling. - **Integrated DC/DC Converter:** Provides stable analog power isolation. - **Compact Design:** Half‑size ISA card with 37‑pin D‑type and dual 20‑pin IDC connectors. - **Software Support:** C/C++ library, DOS utilities, Windows DLL (ACLS‑DLL2), and LabVIEW driver (ACLS‑LVIEW). - **Calibration Support:** On‑board variable resistors (VR1–VR7) for A/D and D/A calibration.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution ISA

- **High‑Resolution A/D Conversion:** 16‑bit successive approximation ADC (ADS7805 or equivalent). - **Sampling Rate:** Up to 100 kHz multiplexed sampling. - **Analog Input Channels:** 16 single‑ended or 8 differential inputs. - **Programmable Gain:** ×1, ×2, ×4, ×8 for flexible input scaling. - **Input Range:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V. - **FIFO Buffer:** 1 K‑word on‑board FIFO with half/full interrupt flags for continuous data streaming. - **Trigger Modes:** Software, internal pacer (timer‑based), or external trigger (TTL). - **Data Transfer Options:** Software polling, interrupt‑driven, FIFO polling, DMA (channels 5–7). - **Digital I/O:** 16 TTL‑compatible digital input/output channels. - **Programmable Counter/Timer:** Intel 8254‑compatible, three 16‑bit down counters with 2 MHz base clock. - **Interrupt and DMA Support:** IRQ selectable (3, 5–7, 9–12, 15); DMA channels 5–7. - **Power Supply:** On‑board DC/DC converter for stable analog power. - **Compact Form Factor:** Half‑size ISA card (163 mm × 123 mm). - **Connectors:** One 37‑pin D‑type connector and two 20‑pin ribbon connectors. - **Software Support:** C/C++ library, DOS utilities, Windows DLL (ACLS‑DLL2), and LabVIEW driver (ACLS‑LVIEW). - **Calibration Support:** On‑board variable resistors for A/D offset and full‑scale adjustment. - **Operating Environment:** 0 °C – 55 °C, 5–95 % RH non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution ISA

- **High-Resolution Analog-to-Digital Conversion:** 16-bit resolution with a maximum sampling rate of 100 kS/s, enabling precise signal acquisition for demanding measurement tasks. - **Programmable Input Amplifier:** Configurable input ranges of 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V, or bipolar ranges of ±1.25 V, ±2.5 V, ±5 V, ±10 V. This flexibility allows adaptation to a wide variety of sensor and signal levels. - **Exceptional Accuracy:** ±0.003% of Full Scale Range (FSR) accuracy ensures high fidelity in analog signal measurement. - **Dual 12-bit Digital-to-Analog Outputs:** Two independent DA channels with ±10 V output range and maximum output current of ±5 mA, suitable for control signal generation or analog actuation. - **Integrated Digital I/O:** 8 digital input and 8 digital output TTL-compatible channels for general-purpose control, monitoring, and interfacing with external devices. - **Counter/Timer Functionality:** One 16-bit counter for event counting, frequency measurement, or timing applications. - **Interrupt and DMA Support:** 5 interrupt request (IRQ) lines and 2 direct memory access (DMA) channels for efficient data transfer and real-time performance. - **Comprehensive Driver Support:** Supplied with driver software for easy integration into PC-based control and data acquisition systems. - **Compact Form Factor:** Standard AT card dimensions (165 mm × 100 mm) for compatibility with legacy and industrial PC systems. - **Robust Connectivity:** 50-pin connector interface for secure and organized signal wiring.

Manufacturer: Axiom

Category: A/D High Resolution ISA

- **High-Resolution Analog-to-Digital Conversion:** Equipped with a **16-bit A/D converter (AD669)**, the card delivers precise analog signal digitization with a maximum sampling rate of **100 kS/s** (100,000 samples per second). - **Flexible Input Configuration:** Supports **16 single-ended (SE)** or **8 differential (DI)** analog input channels. With the optional **ATCH-16(PC)** expansion module, the configuration can be extended to **32 SE / 16 DI** channels. - **Wide Input Voltage Range:** Configurable input ranges of **±10 V**, **±5 V**, **0–10 V**, and **0–5 V**, allowing compatibility with a broad range of sensors and signal sources. - **Integrated FIFO / Ring Buffer:** Features a **256K-word FIFO (First-In-First-Out) or ring buffer**, enabling continuous high-speed data acquisition without data loss, even under heavy system load. - **Intelligent Sampling Control:** Incorporates a dedicated **ASIC (Application-Specific Integrated Circuit)** for intelligent sampling management, ensuring stable and accurate timing control during high-speed data acquisition. - **Analog Output (D/A Conversion):** Includes **one 16-bit D/A output channel** with output ranges of **±10 V** or **0–10 V**, and a **conversion time of 13 µs**, suitable for waveform generation, control signals, or analog feedback applications. - **Digital I/O Capability:** Provides **4 digital input** and **4 digital output** lines (TTL level), enabling control and monitoring of external devices such as relays, switches, or indicators. - **DMA and Interrupt Support:** Compatible with **DMA channels 5, 6, and 7**, and **IRQ lines 5, 7, 9–12, and 15**, allowing flexible system integration and efficient data transfer with minimal CPU overhead. - **Standard Connector Interface:** Equipped with a **D-Sub 37-pin female connector**, providing a robust and standardized interface for analog and digital signal connections. - **Compact Form Factor:** Physical dimensions of **160 mm × 122 mm**, designed for installation in standard PC/AT expansion slots. - **Manufacturer Reliability:** Developed and produced by **Contec**, a recognized manufacturer of industrial I/O and measurement hardware, ensuring long-term reliability and support.

Manufacturer: Contec

Category: A/D High Resolution ISA

- **High Channel Density:** 32 single‑ended isolated analog input channels for simultaneous multi‑point measurement. - **High Voltage Isolation:** Each channel is isolated up to **2500 VDC**, protecting the host PC and peripherals from high‑voltage transients. - **12‑bit Resolution:** Successive approximation A/D converter (Burr‑Brown AD574 or equivalent) provides precise digital representation of analog signals. - **Programmable Input Range:** Bipolar and unipolar ranges selectable via jumpers and software: - Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V, ±0.3125 V - Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V, 0–0.625 V - **Software‑Programmable Gain:** Selectable gains of ×1, ×2, ×4, ×8, ×16 for flexible scaling. - **On‑Board Signal Conditioning:** RC filter networks per channel for attenuation or current‑to‑voltage conversion. - **Integrated DC‑to‑DC Converters:** Provide isolated power for analog circuitry, ensuring stable operation and noise immunity. - **Compact Design:** Half‑size ISA card (160 mm × 122 mm) with 4‑layer PCB and dedicated ground plane. - **Over‑Voltage Protection:** Continuous protection up to ±35 V on all analog inputs. - **Software Triggered Conversion:** A/D conversion initiated by software control for flexible timing. - **Comprehensive Software Support:** Includes DOS C/C++ libraries, Windows DLLs (ACLS‑DLL2), and LabVIEW drivers (ACLS‑LVIEW). - **Industrial‑Grade Reliability:** Designed for 0 °C – 55 °C operation, 5–95 % RH non‑condensing.

Manufacturer: Contec

Category: A/D Isolated ISA

- **32 Single‑Ended Analog Input Channels:** Each channel is individually isolated to protect the host PC and peripherals from high‑voltage transients. - **High Isolation Voltage:** Over **2500 VDC** channel‑to‑system isolation ensures robust protection in noisy or high‑voltage environments. - **12‑bit Resolution:** Utilizes a **Burr‑Brown AD574** or equivalent successive‑approximation A/D converter for precise analog‑to‑digital conversion. - **Sampling Rate:** Up to **50 kHz** (50 kS/s) maximum conversion speed. - **Programmable Input Range:** - **10 V Range:** Bipolar ±0.3125 V – ±5 V; Unipolar 0–0.625 V – 0–10 V - **20 V Range:** Bipolar ±0.625 V – ±10 V; Unipolar 0–1.25 V – 0–10 V - **Software‑Programmable Gain:** Selectable gains of ×1, ×2, ×4, ×8, ×16 per channel. - **Integrated DC‑to‑DC Converters:** Provide stable isolated power for analog circuitry. - **Compact Half‑Size ISA Card:** 4‑layer PCB with integral ground plane for noise immunity. - **On‑Board Signal Conditioning:** RC filter networks per channel for attenuation or current‑to‑voltage conversion. - **Over‑Voltage Protection:** Continuous ±35 V maximum input protection. - **Software Triggered Conversion:** Fully software‑controlled A/D triggering and data acquisition. - **Comprehensive Software Support:** DOS C/C++ libraries, Windows DLLs, and LabVIEW drivers. - **Calibration Adjustments:** Four precision trimmers (VR1–VR4) for offset and full‑scale calibration in bipolar and unipolar modes.

Manufacturer: Adlink Technology Inc.

Category: A/D Isolated ISA

- **High-Resolution Analog Input:** 12-bit analog-to-digital conversion for precise signal measurement. - **Sampling Rate:** Supports up to 60,000 samples per second (60 kS/s), enabling real-time data acquisition for dynamic signals. - **Analog Input Channels:** 16 single-ended (SE) channels for multi-signal monitoring. - **Analog Output Channels:** Two 12-bit digital-to-analog (D/A) output channels with selectable output ranges of 0–5 V or 0–10 V. - **Programmable Gain:** Adjustable input ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.63 V, and ±0.32 V for flexible signal scaling and improved resolution. - **Digital I/O:** 24 digital input/output lines (TTL-compatible), providing 24 input and 24 output channels for control and monitoring tasks. - **Bus Interface:** ISA (AT) bus interface for legacy PC-based data acquisition systems. - **DMA and Interrupt Support:** Direct Memory Access (DMA) and interrupt request (IRQ) channels 2–15 supported for efficient data transfer and system integration. - **Compatibility:** Fully compatible with the DAS-16 standard (single-ended mode only), ensuring interoperability with existing software and hardware ecosystems. - **Software Support:** Includes drivers and libraries for BASIC, C, and Pascal programming environments, simplifying integration into custom applications. - **Form Factor:** Half-size ISA card, suitable for compact system configurations.

Manufacturer: Axiom

Category: A/D General Purpose ISA

- **High‑Resolution Analog Input:** 16‑bit successive approximation A/D converter (ADS7805 or equivalent). - **Flexible Channel Configuration:** 16 single‑ended or 8 differential analog input channels. - **Programmable Input Range:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V. - **Programmable Gain:** ×1, ×2, ×4, ×8. - **High Sampling Rate:** Up to 100 kHz for single‑channel, 20 kHz for multi‑channel multiplexed operation. - **Fast Conversion:** 8 µs conversion time. - **Dual 12‑bit D/A Outputs:** Two double‑buffered analog output channels (DAC7541 or equivalent). - **Selectable Output Range:** 0–5 V or 0–10 V (internal reference), ±10 V (external reference). - **Digital I/O:** 16 TTL‑compatible inputs and 16 TTL‑compatible outputs. - **Programmable Counter/Timer:** Three 16‑bit counters (Intel 8254) with 2 MHz base clock. - **Trigger Modes:** Software, programmable pacer (timer), or external pulse trigger. - **Data Transfer Options:** Polling, interrupt, or DMA (channels 1 or 3). - **Interrupt Support:** Selectable IRQ3, 5, 6, 7, 9, 10, 11, 12, or 15. - **Integrated DC/DC Converter:** Provides stable analog power isolation. - **Compact Design:** Half‑size ISA card (163 mm × 123 mm). - **Connectors:** One 37‑pin D‑type and two 20‑pin IDC connectors. - **Software Support:** DOS C/C++ library, Windows DLL (ACLS‑DLL2), and LabVIEW driver (ACLS‑LVIEW). - **Calibration Support:** On‑board variable resistors (VRs) for A/D and D/A calibration.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution ISA

- **High-Speed Analog Input:** 90 kS/s (kilosamples per second) maximum sampling rate, enabling accurate and responsive data capture for dynamic signals. - **High Resolution:** 12-bit analog-to-digital conversion for precise signal quantization and measurement accuracy. - **Flexible Channel Configuration:** Supports **16 single-ended (SE)** or **8 differential (DI)** analog input channels, allowing users to select between higher channel count or improved noise immunity. - **Programmable Input Ranges:** ±1.25 V, ±2.5 V, ±5 V, ±10 V or 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V ranges, with programmable gain settings of 1, 2, 4, or 8. - **Dual Analog Outputs:** Two 12-bit D/A channels for waveform generation, control signals, or analog actuation. - **Digital I/O Capability:** 8 TTL-compatible digital input/output lines for control, monitoring, or synchronization tasks. - **DMA and Interrupt Support:** Direct Memory Access (DMA) channels 1 or 3 and interrupt request (IRQ) lines 2–15 for efficient data transfer and flexible system integration. - **Software Compatibility:** Includes drivers and libraries for **Windows**, **BASIC**, **C**, and **Pascal**, simplifying software development and integration. - **Hardware Compatibility:** Fully **DAS-16G compatible**, ensuring interoperability with existing software and hardware ecosystems. - **Compact Form Factor:** Half-size AT ISA card design for easy installation in standard industrial PCs. - **Connector Interface:** 50-pin header connector for analog and digital signal interfacing.

Manufacturer: Axiom

Category: A/D General Purpose ISA

- **IEEE‑488.1 / IEEE‑488.2 Compliance:** Fully conforms to the IEEE‑488 standards, ensuring interoperability with a wide range of laboratory and industrial instruments. - **DMA‑Based High‑Speed Transfer:** Supports Direct Memory Access (DMA) data transfer mode with a maximum throughput of **400 Kbyte/sec**, minimizing CPU load and improving data exchange efficiency. - **CONTEC Original FPGA Controller:** Incorporates a CONTEC‑developed FPGA controller compatible with the NEC µPD7210C GPIB controller, providing stable operation and long‑term component availability. - **Flexible Interrupt and DMA Channel Selection:** Software‑selectable interrupt request (INTA) and DMA channels (CH1–CH3) allow flexible system configuration and resource allocation. - **Comprehensive Bus Compatibility:** Designed for AT‑bus (ISA) architecture, suitable for integration into industrial PCs and legacy control systems. - **Robust Electrical Interface:** Implements negative logic signaling ( 2.0 V high) across 8 parallel data lines and 3 handshake lines, ensuring reliable communication even in electrically noisy environments. - **Multiple Device Connectivity:** Supports up to **15 GPIB devices** on a single bus, with a total cable length of up to **20 m** (4 m maximum between controller and first device). - **Compact Form Factor:** Board dimensions of **163.0 mm (L) × 107.0 mm (H)** allow installation in standard AT‑bus slots. - **Low Power Consumption:** Operates at **5 V DC / 350 mA**, minimizing system power requirements. - **Comprehensive Software Support:** Compatible with CONTEC’s **API‑PAC(W32)** driver package for Windows, providing Win32 API‑based DLL functions for application development. - **Optional Accessories:** Compatible with CONTEC’s double‑shielded GPIB cables (PCN‑T02, PCN‑T04) and CN‑GP/C connector adapter for noise‑resistant installations. - **CE Marking:** Conforms to European safety and EMC standards for industrial electronic equipment.

Manufacturer: Contec

Category: IEEE (GPIB) Cards

- **IEEE‑488.1 / IEEE‑488.2 Compliance:** Fully conforms to both IEEE‑488.1 hardware and IEEE‑488.2 protocol standards, ensuring compatibility with a broad range of GPIB instruments and controllers. - **High‑Speed Data Transfer:** Supports up to **1 MB/s receive** and **700 kB/s send** rates (maximum), enabling rapid data exchange between PC and connected devices. - **Large FIFO Buffers:** Equipped with dual **256 kB FIFO buffers** (2 × 256 kB) for efficient data handling and reduced CPU overhead during high‑speed transfers. - **DMA and Interrupt Support:** Utilizes **DMA channels 1–3** and **IRQ3–7/9–12/14/15**, allowing flexible configuration and optimized system performance. - **Bus Master Transfer (F‑Series Feature):** Transfers large data blocks directly between the board and system memory without CPU intervention, minimizing host load. - **GPIB Bus Analyzer Function:** Provides real‑time monitoring and analysis of GPIB bus signals, enabling debugging and performance evaluation of connected instruments. - **High‑Precision Timer:** Integrated timer for accurate time measurement and synchronization in Windows environments. - **NEC µPD7210 Controller Chip:** Employs the industry‑standard NEC GPIB controller for stable operation and long‑term component availability. - **Comprehensive Software Support:** Compatible with CONTEC’s API‑TOOL drivers for Windows and Linux, as well as MATLAB and National Instruments LabVIEW environments. - **Diagnostic and Line Monitoring Tools:** Built‑in diagnostic program for hardware and communication verification; supports reading of control and data line states (IFC, ATN, SRQ, REN, EOI, DAV, NRFD, NDAC, DIO1–DIO8). - **Industrial‑Grade Reliability:** Designed for continuous operation in industrial and laboratory environments, with robust electrical characteristics and long‑term product support.

Manufacturer: Contec

Category: IEEE (GPIB) Cards

- **AT/ISA Bus to PCMCIA Interface:** Provides a direct hardware-level interface between an ISA bus system and PCMCIA cards, enabling legacy systems to utilize modern PCMCIA peripherals. - **PCMCIA 2.0 and Later Compatibility:** Fully compliant with PCMCIA 2.0 specifications, ensuring support for a wide range of PCMCIA cards, including memory, I/O, and communication cards. - **Multi-Type Card Support:** Compatible with **Type I, Type II, and Type III** PCMCIA cards, allowing flexible use of various card thicknesses and functionalities. - **Compact Half-Size ISA Form Factor:** Designed as a **half-size ISA bus card**, measuring **160 mm x 107 mm**, suitable for installation in compact industrial PCs or embedded systems. - **Low Power Consumption:** Operates on **5 VDC at 150 mA**, minimizing power draw and heat generation, ideal for systems with limited power budgets. - **Dual I/O Port Addressing:** Utilizes **I/O addresses 0x3E0 and 0x3E1**, providing a simple and conflict-free addressing scheme for system integration. - **High Reliability and Industrial Durability:** Engineered for continuous operation in industrial environments, with robust electrical design and stable signal integrity. - **Plug-and-Play Expansion Capability:** Enables seamless addition of PCMCIA functionality to existing ISA-based systems without extensive hardware modification. - **Manufacturer Support and Documentation:** Backed by Contec’s industrial-grade quality assurance, technical documentation, and long-term product support.

Manufacturer: Contec

Category: Bus Extensions

- **High‑Performance ARM9 Processor:** 400 MHz Atmel AT91SAM9G45 CPU with integrated MMU (Memory Management Unit) for full Linux support. - **Pre‑installed Linux Environment:** Linux kernel 2.6.38 with U‑Boot bootloader and root file system pre‑loaded in NAND Flash. - **Integrated Memory:** 128 MB DDR2 SDRAM and 256 MB NAND Flash, plus 2 MB DataFlash® for system backup. - **Networking:** On‑board 10/100 Mbps Ethernet interface with integrated PHY (DAVICOM DM9161) and 1.5 kV magnetic isolation. - **Display & Touch Interface:** 24‑bit TTL LCD interface supporting up to 1280 × 860 TFT panels with dimming and backlight control; 4‑wire resistive touchscreen interface. - **Multiple Serial Interfaces:** Four UARTs (up to 921.6 kbps) with hardware flow control and software‑configurable RS‑232/RS‑485 modes. - **USB Connectivity:** One USB 2.0 high‑speed (480 Mbps) host port and one USB 2.0 device (client) port. - **Expandable I/O:** 15 GPIO pins (CMOS/3.3 V compatible), I²C, SPI, I²S, and AC97 interfaces. - **Storage Expansion:** SD/MMC interface supporting SD 2.0 cards up to 32 GB. - **Low Power Consumption:** Operates from 3.0 – 3.6 V DC (3.3 V nominal) with typical power draw under 2.5 W. - **Compact Form Factor:** 80 mm × 50 mm board with 128‑pin (2.0 mm pitch) connectors. - **Industrial‑Grade Reliability:** Operating temperature range 0 °C – 70 °C; on‑board watchdog timer and real‑time clock with lithium backup battery. - **Comprehensive Software Stack:** Includes GNU C/C++ toolchain, web server (lighttpd), SSH, FTP, Telnet, MySQL, PHP, Python, Perl, QT4‑Embedded, GTK+, and more.

Manufacturer: Artila

Category: SBC Modules

- **Linux-Ready Platform:** Pre-installed Linux 2.6.38 kernel and file system, ready for immediate deployment and application development. - **ARM9 Processor:** Powered by the Atmel AT91SAM9G45 (400 MHz) with integrated MMU, 32 KB instruction cache, and 32 KB data cache. - **Memory & Storage:** 128 MB DDR2 SDRAM, 256 MB NAND Flash, and 2 MB DataFlash for system backup. Internal microSD slot supports up to 32 GB SDHC cards. - **Networking:** Two independent 10/100 Mbps Ethernet ports with 1.5 kV magnetic isolation for reliable industrial networking. - **Serial Communication:** Four software-configurable serial ports—one RS-232/422/485 and three RS-232/485—supporting baud rates up to 921.6 kbps. - **USB Connectivity:** Two USB 2.0 high-speed (480 Mbps) host ports for peripherals such as flash drives, Wi-Fi dongles, and serial adapters. - **Compact & Fanless Design:** Dimensions 78 × 108 × 24 mm, fanless metal enclosure for DIN-rail mounting. - **Low Power Consumption:** Less than 3 W typical power draw (200 mA @ 12 VDC). - **Wide Power Input Range:** 9–48 VDC input for flexible industrial power systems. - **Operating Temperature:** 0 °C to 70 °C (32 °F to 158 °F). - **Software Development Support:** Includes GNU C/C++ cross-compilation toolchain, ipkg package management, and web-based administration via Webmin. - **Security & Networking Services:** SSH, SSL, FTP, Telnet, and HTTP servers preconfigured. - **Reliability Features:** Integrated watchdog timer, real-time clock, and system recovery utilities.

Manufacturer: Artila

Category: IoT Gateway

- **Processor:** Atmel AT91SAM9G45 ARM9 CPU, 400 MHz with Memory Management Unit (MMU) - **Memory:** 128 MB DDR2 SDRAM, 256 MB NAND Flash - **Storage Expansion:** MicroSD slot supporting up to 32 GB SDHC cards - **Networking:** Two 10/100 Mbps Ethernet ports (LAN 1 and LAN 2) - **Wireless Connectivity:** - Optional 802.11 b/g/n WLAN via half‑size miniPCIe (Ralink RT5390U) - Optional 2G/3G cellular via full‑size miniPCIe (Cinterion module) with SIM socket - **Serial Communication:** Four RS‑232/422/485 software‑selectable ports - **USB Interfaces:** Two USB 2.0 high‑speed (480 Mbps) host ports and one USB device port - **Digital I/O:** - Two isolated digital inputs (2500 Vrms isolation) - One relay output (Form A or B, 30 VDC @ 1 A, jumper‑selectable) - **Operating System:** Pre‑installed Linux 2.6.38 kernel and root file system - **Software Environment:** - GNU C/C++ toolchain for Linux and Windows (via Cygwin) - BusyBox utilities and Artila‑specific management tools - Web server (lighttpd), SSH, FTP, and Telnet services pre‑configured - **Power Input:** 9 – 48 V DC, 500 mA @ 12 V DC typical - **Enclosure:** Fanless, metal housing suitable for DIN‑rail or wall mounting - **Operating Temperature:** 0 °C – 70 °C - **Dimensions:** 175 mm × 103 mm × 43 mm

Manufacturer: Artila

Category: IoT Gateway

- **ARM9-based Industrial Embedded Platform:** Powered by the **Atmel AT91SAM9G45** 400 MHz CPU, providing a balance of performance and energy efficiency for embedded control and communication tasks. - **Preinstalled Windows CE 6.0:** Ready-to-use operating system with support for .NET Compact Framework 2.0, enabling rapid application development and deployment. - **Comprehensive Connectivity:** - **2 × 10/100 Mbps Ethernet ports** for network redundancy or dual-network applications. - **4 × RS-232/422/485 serial ports** (3 configurable as RS-232/485, 1 configurable as RS-232/422/485 high-speed). - **2 × USB 2.0 host ports** supporting 480 Mbps data rate. - **Expandable Storage:** 128 MB NAND Flash, 128 MB DDR2 RAM, and a **microSD slot supporting up to 32 GB SDHC** cards. - **Industrial Reliability:** Fanless design, wide **9–48 VDC** power input range, and **0–70°C** operating temperature range. - **Security and Networking:** Built-in support for **SSL, SSH 1.0/2.0**, and standard TCP/IP services (Web, Telnet, FTP). - **Developer-Friendly Environment:** Includes GNU C/C++ toolchain for Linux/Windows, Java accelerator, and SDK support for C/C++ and .NET development. - **Compact and Durable:** Rugged metal housing (78 × 108 × 24 mm) suitable for DIN-rail mounting in industrial cabinets. - **Low Power Consumption:** Typical consumption of **3 W (300 mA @ 12 VDC)**, ideal for energy-efficient embedded systems.

Manufacturer: Artila

Category: IoT Gateway

- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA) with onboard transformers and 1.5 kV isolation. - **Serial Communication:** Four UARTs (up to 921.6 kbps) with hardware/software flow control; two CAN 2.0A/B interfaces. - **USB:** Two USB 2.0 high‑speed (480 Mbps) host ports and one USB device/console port. - **Expansion Interfaces:** SPI (4 chip selects), I²C, I²S (TX/RX), SD 2.0/SDHC, and 21 GPIO pins. - **Power Efficiency:** Single 5 V DC input, typical consumption 

Manufacturer: Artila

Category: SBC Modules

- **Processor:** ARM Cortex‑A7 core (ATMEL/Microchip i.MX6ULL) optimized for low‑power embedded computing. - **Operating System:** Pre‑installed **Linux Kernel 4.14.x**, supporting standard GNU/Linux utilities and development environments. - **Memory Configuration:** - **512 MB LPDDR3 SDRAM** for high‑speed system memory. - **4 GB eMMC Flash** for OS and application storage. - **16 MB DataFlash** for bootloader and configuration data. - **Connectivity Interfaces:** - **4 × UART ports** (921.6 kbps each) with full hardware flow control (RTS/CTS). - **2 × USB 2.0** host/device ports. - **2 × 10/100 Mbps Ethernet** interfaces for dual‑LAN or redundant networking. - **8 × GPIO** (General Purpose Input/Output) lines for digital control and monitoring. - **Power Efficiency:** Operates on **5 V DC**, consuming **less than 1 W**, ideal for fanless and battery‑powered systems. - **Compact Form Factor:** **63 mm × 43 mm**, enabling integration into space‑constrained designs. - **Industrial Reliability:** Designed for continuous operation in industrial environments, supporting extended temperature ranges and stable long‑term supply. - **OEM‑Ready Design:** Provides a ready‑to‑integrate embedded computing core for custom carrier boards or system designs.

Manufacturer: Artila

Category: SBC Modules