- **Processor Compatibility:** Supports Intel Pentium MMX, Low Power Pentium, AMD K6, K6-2, K6-3, and Cyrix MII CPUs ranging from 166 MHz to 400 MHz. - **Socket Type:** Socket 7 CPU interface. - **Chipset:** Intel 82430TX PCIset with 82371EB southbridge. - **Memory Support:** One 168-pin DIMM socket supporting up to 256 MB SDRAM. - **Display Interface:** Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output. - **Storage Interfaces:** Two Enhanced IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP drives). - **DiskOnChip Socket:** Supports M-Systems flash disk (2 MB to 72 MB) for boot and storage. - **Serial Communication:** Two 16550 UART-compatible ports (COM1 RS-232, COM2 configurable as RS-232/422/485). - **Parallel Port:** High-speed bi-directional SPP/ECP/EPP parallel port with ESD protection. - **Ethernet:** Integrated Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN and Alert-on-LAN II support. - **Watchdog Timer:** Programmable 0–255 seconds/minutes for system recovery. - **Hardware Monitoring:** Winbond W83781D monitors CPU/system temperature, voltages, and fan speeds. - **Power Management:** BIOS-controlled green function, modem ring-on, and Windows 98 software-controlled power-off. - **Form Factor:** Half-size PICMG SBC, 185 mm x 122 mm. - **Operating Temperature:** 0°C to 70°C. - **Humidity Range:** 5% to 95% non-condensing. - **Power Supply:** AT or ATX compatible; +5V @ 17.5A (max), +12V @ 50 mA.

Manufacturer: Adlink Technology Inc.

Category: Slot-CPUs

- **Processor Compatibility:** Supports Intel Pentium MMX, Low Power Pentium, AMD K6, K6-2, K6-3, and Cyrix MII CPUs with clock speeds from 166 MHz to 400 MHz. - **Socket Type:** Socket 7 CPU interface. - **Chipset:** Intel 82430TX PCIset with 82371EB southbridge. - **Memory:** Up to 256 MB SDRAM via one 168-pin DIMM socket. - **Display:** Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output. - **Ethernet:** Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN (WOL) and Alert-on-LAN II support. - **Storage Interfaces:** Two IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP). - **Serial/Parallel Ports:** Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485) and one parallel port (SPP/ECP/EPP). - **DiskOnChip Socket:** Supports M-Systems flash disk modules (2 MB to 72 MB). - **Watchdog Timer:** Programmable 0–255 seconds/minutes for system recovery. - **Hardware Monitoring:** Winbond W83781D monitors CPU/system temperature, fan speed, and voltages. - **Power Management:** BIOS-controlled green function, modem ring-on, and Windows 98 software power-off. - **Form Factor:** Half-size PICMG SBC, 185 mm x 122 mm. - **Operating Temperature:** 0°C to 70°C. - **Humidity Range:** 5% to 95% non-condensing.

Manufacturer: Adlink Technology Inc.

Category: Slot-CPUs

Handbook

Manufacturer: No category

Category: Misc.Software

- **Modular Compatibility:** Designed to house either one or two MBE8 modules, enabling scalable configurations depending on system requirements. - **Flexible Input Options:** The enclosure supports selectable input configurations, allowing adaptation to various signal or power entry methods. - **Front-Face Output Interface:** Provides an output interface at the front side (Stirnseite), suitable for flat ribbon cable connections or other standardized connectors. - **Integrated Power Supply Support:** Compatible with external plug-in power supplies (Steckernetzteil), ensuring reliable power delivery for mobile or stationary applications. - **Compact and Ergonomic Design:** The enclosure dimensions are optimized for handheld use, offering a comfortable grip and balanced weight distribution. - **Durable Construction:** Built from high-quality materials to ensure mechanical stability, protection against environmental influences, and long-term durability. - **Two Size Variants:** Available in two height configurations—50 mm for single-module installations and 70 mm for dual-module setups—while maintaining consistent length and width. - **Ease of Assembly:** Designed for straightforward integration of MBE8 modules, with accessible mounting points and cable routing options. - **Professional Appearance:** The enclosure’s clean, functional design supports professional-grade instrumentation and control applications.

Manufacturer: No category

Category: Euroformat Basisplatine mit Frontplatten

- **Purpose-built design:** Tailored to fit the MTB4 device precisely, ensuring optimal alignment and secure housing. - **Flat ribbon cable cutout:** Integrated opening for a flat ribbon cable connector, allowing easy external interfacing without modification. - **Ergonomic handheld form factor:** Designed for comfortable handheld operation, suitable for mobile or field applications. - **Protective enclosure:** Shields the internal electronics from mechanical stress, dust, and incidental contact. - **Durable construction:** Manufactured from robust materials suitable for industrial and laboratory environments. - **Ease of integration:** Provides straightforward assembly and disassembly for maintenance or component replacement. - **Compact and lightweight:** Optimized for portability while maintaining sufficient internal space for the MTB4 module and associated wiring. - **Customizable interface options:** The enclosure design allows for additional cutouts or labeling as required by the application.

Manufacturer: No category

Category: Signalkonditionierung mit galvanischer Trennung

- **Optimized for EMPV-1201:** Engineered to provide seamless connectivity and full signal compatibility with the EMPV-1201 unit. - **High-Definition Multimedia Interface (HDMI):** Supports uncompressed digital video and multi-channel audio transmission through a single cable. - **High Bandwidth Capability:** Designed to handle high data transfer rates required for HD and Full HD video signals, as well as advanced audio formats. - **Digital Signal Integrity:** Shielded construction minimizes electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring stable signal quality. - **Plug-and-Play Operation:** No additional configuration required; automatically recognized by compatible devices. - **Durable Construction:** Built with high-quality materials for long-term reliability and consistent performance. - **Gold-Plated Connectors (typical for HDMI accessories):** Provides corrosion resistance and improved conductivity for stable signal transmission. - **Backward Compatibility:** Compatible with earlier HDMI versions and devices supporting standard HDMI interfaces. - **Compact and Flexible Design:** Facilitates easy routing and installation in confined spaces or integrated system setups.

Manufacturer: Innodisk

Category: mPCIe Modules

- **High‑Gain Analog Input:** One differential analog input channel with programmable gain and selectable voltage or current ranges. - **Thermocouple Compatibility:** Direct connection to thermocouples (types J, K, T, E, R, S, B, N, C) with built‑in cold junction compensation (CJC). - **Programmable Input Ranges:** ±15 mV to ±2.5 V or ±20 mA (via external 125 Ω resistor). - **High Resolution:** 16‑bit A/D conversion for precise signal acquisition. - **Isolation:** 2500 Vrms channel‑to‑system isolation (5000 Vrms for non‑display version). - **Digital I/O:** - 2 open‑collector digital outputs (30 V max, 50 mA sink). - 1 digital input channel usable as event counter (up to 50 Hz). - **Alarm Functionality:** Programmable high/low alarm thresholds with digital output signaling. - **Watchdog Protection:** - Internal 150 ms watchdog for module self‑monitoring. - Host‑programmable watchdog (100 ms – 25.5 s) for communication supervision. - **Display:** 5½‑digit LED display for real‑time measurement visualization. - **Ease of Integration:** Software‑configurable parameters, RS‑485 networking, and simple wiring. - **Industrial Durability:** Wide power input range (+10 V – +30 V DC), robust isolation, and noise immunity.

Manufacturer: Adlink Technology Inc.

Category: RS485 DIN Rail IO Modules

- **7‑inch WVGA TFT‑LCD Display:** 800 × 480 resolution, 400 cd/m² brightness, LED backlight rated for 50,000 hours. - **ARM9‑Based CPU:** Atmel AT91SAM9G45, 400 MHz, ARM926EJ‑S core with MMU. - **Memory Architecture:** 128 MB SDRAM, 128 MB NAND Flash, and 2 MB Data Flash for system recovery. - **Touch Interface:** 4‑wire resistive touchscreen with 82.5 % transparency and 1 million‑touch minimum lifetime. - **Fanless Operation:** Passive cooling design for silent, maintenance‑free operation. - **Wide Power Input:** 12 V – 40 V DC via Phoenix 3‑pin terminal block. - **Multiple Serial Interfaces:** 3 × RS‑232 (DB‑9), 1 × RS‑422/485 (Phoenix 10‑pin), and 1 × console port. - **USB Connectivity:** 2 × USB 2.0 Type‑A host ports and 1 × USB 2.0 Mini‑AB client port. - **Networking:** 1 × 10/100 Mbps Ethernet (RJ‑45). - **GPIO Support:** 4 programmable digital I/O channels for control and sensing. - **Audio Output:** 3.5 mm phone jack for line‑out. - **Optional Wireless:** Internal Wi‑Fi module available via OEM/ODM request. - **Rugged Construction:** IP65‑rated front panel, steel or stainless‑steel frame, panel or VESA mounting. - **Environmental Tolerance:** Standard 0 – 60 °C; optional T‑model supports −20 – 75 °C. - **Certifications:** CE and FCC Class A compliant. - **Software Flexibility:** Linux or Windows CE pre‑installed; SDKs for C/C++ development. - **System Recovery:** Bootable Data Flash for fail‑safe recovery if NAND Flash fails.

Manufacturer: AdvanIPC

Category: LCD HMI

- **Processor:** TI Sitara AM3354 ARM Cortex‑A8, 32‑bit RISC architecture, 800 MHz (up to 1 GHz). - **Display:** 12‑inch TFT LCD, 800 × 600 resolution, 16.2 M colors, 600 cd/m² brightness, 1500:1 contrast ratio. - **Touchscreen:** Projected capacitive type, USB‑controlled, explosion‑proof, >85 % light transparency. - **Memory:** 256 MB DDR3 SDRAM (expandable to 512 MB). - **Storage:** 512 MB onboard eMMC NAND Flash; 1 × microSD slot supporting up to 64 GB SDHC. - **Graphics Engine:** PowerVR SGX530 3D graphics accelerator supporting Direct3D Mobile, OpenGL ES 1.1/2.0, OpenVG 1.0, and OpenMAX APIs. - **Connectivity:** - 2 × Gigabit Ethernet (10/100/1000 Mbps, RJ‑45) - 2 × USB 2.0 Host ports (480 Mbps, Type A) - 1 × RS‑232 serial port - 1 × CAN bus 2.0 A/B (up to 1 Mbps; optional second port) - **Power Input:** +18 VDC – +30 VDC (typical +24 VDC), 14.4 W consumption. - **Construction:** Die‑cast aluminum front bezel, metal rear housing, IP65‑rated front panel. - **Mounting:** Panel‑mount and VESA‑mount compatible; fanless design for industrial environments. - **Operating System:** Linux 4.9.x with Barebox bootloader, EXT4 filesystem, and QT5 graphics library. - **Software Environment:** LXDE desktop, Debian package management, pre‑installed development and web tools. - **Operating Range:** 0 °C – 50 °C, 25 – 85 % RH (non‑condensing). The HC‑3120’s combination of robust hardware, industrial‑grade materials, and open Linux software stack makes it a versatile platform for embedded HMI, SCADA, and automation control applications.

Manufacturer: Artila

Category: LCD HMI

- **High-Performance ARM Processor:** Powered by the **TI AM3352 Sitara ARM Cortex-A8** CPU at **1GHz**, delivering efficient processing for HMI and control applications. - **Integrated Graphics Engine:** Equipped with **SGX530 3D graphics engine** supporting **Direct3D Mobile**, **OpenGL ES 1.1/2.0**, **OpenVG 1.0**, and **OpenMAX**, enabling smooth rendering of graphical interfaces and animations. - **7-inch TFT LCD Display:** Features an **800×480 resolution**, **300 cd/m² brightness**, **1500:1 contrast ratio**, and **140°/120° viewing angles**, ensuring clear visibility in industrial lighting conditions. - **Rugged Industrial Design:** Fanless, compact, and **IP65-compliant front panel** for dust and water resistance, suitable for harsh environments. - **Flexible Connectivity:** Includes **3 serial ports (RS-232/422/485)**, **1 Ethernet port (10/100 Mbps)**, **2 USB 2.0 ports (Host and Client)**, and **1 microSD slot** supporting up to **64GB SDHC**. - **Linux-Based System:** Runs **Linux kernel 4.9.x**, supporting boot from **eMMC** or **microSD**, with optional HMI software and remote management capabilities. - **Mounting Versatility:** Supports **panel mount** and **VESA 75×75mm** mounting options for flexible installation. - **Wide PLC Compatibility:** Compatible with major PLC brands such as **Allen-Bradley**, **Mitsubishi**, **Siemens**, **Omron**, and **Koyo**, as well as **Modbus RTU/TCP Master/Slave** protocols. - **Low Power Consumption:** Operates at **24VDC**, consuming only **8W**, ideal for energy-efficient industrial systems. - **Enhanced Reliability:** Designed for **0–50°C operating temperature**, **10–90% humidity**, and **Level 4 ESD protection** (8kV contact, 15kV air-gap).

Manufacturer: Artila

Category: LCD HMI

- **Comprehensive HP VEE Integration:** Provides a complete set of HP VEE user objects and function groups for analog input/output, digital I/O, and counter/timer operations. - **Multi‑Platform Support:** Fully compatible with Windows 95/98/NT 4.0/2000/XP, ensuring broad usability across legacy and industrial systems. - **Unified Function Interface:** Identical function calls across all supported Windows versions, allowing cross‑platform application portability. - **Extensive Hardware Compatibility:** Supports a wide range of ADLINK NuDAQ PCI and CompactPCI cards, including models such as PCI‑6208, 6308, 7200, 7230, 7248, 7250, 7296, 7432, 7433, 7434, 9111, 9112, 9113, 9114, 9118, 9812, and others. - **Advanced Configuration Utility (PciUtil):** Includes the NuDAQ Registry/Configuration Utility for driver registration, removal, and buffer memory allocation management. - **Comprehensive Function Groups:** Organized into General Configuration, Analog Input/Output, Digital Input/Output, DIO, and Timer/Counter groups for structured programming. - **DMA and Interrupt Transfer Support:** Enables high‑speed data acquisition using Direct Memory Access (DMA) or interrupt‑driven transfers with configurable buffer sizes. - **Continuous and One‑Shot Modes:** Supports both single‑sample (one‑shot) and continuous acquisition/output operations for flexible measurement control. - **Backward Compatibility:** Includes dedicated PCIS‑VEE/95 objects for legacy Windows 95 systems and earlier NuDAQ hardware. - **Robust Error Handling and Configuration:** Provides initialization, release, and configuration functions to manage hardware resources efficiently.

Manufacturer: Adlink Technology Inc.

Category: ADLink Driver, Software

- **High-Speed Distributed I/O Communication:** Operates at a data rate of **6 Mbps** using a full-duplex RS-422 communication scheme with transformer isolation. - **Real-Time Deterministic Performance:** The I/O scan time is linearly proportional to the number of slave modules, ensuring predictable and repeatable timing. Each additional slave adds **30.1 µs** to the total scan cycle. - **Large I/O Capacity:** Supports up to **63 slave I/O modules per master**, with each module providing up to 32 input/output channels. A single PC can host up to **16 masters**, enabling control of over **16,000 I/O points**. - **Simple and Cost-Effective Wiring:** Uses standard **Cat.5 100Base-TX Ethernet cables** with **RJ45 connectors**, minimizing wiring complexity and installation cost. - **Self-Diagnostic and Error Handling:** Built-in CRC12 error checking and slave no-response counters ensure robust communication integrity. The system automatically detects and flags communication errors. - **Modular and Scalable Architecture:** The HSL system’s modular design allows easy expansion by adding slave modules without requiring additional PCI slots. - **Ease of Programming:** Equipped with **32 KB of onboard SRAM** for I/O data buffering. Users can access I/O data directly through memory-mapped PCI operations without complex protocol handling. - **Comprehensive Software Support:** Includes Windows DLL drivers, Linux drivers, LabVIEW VIs, ISaGRAF SoftPLC drivers, OPC server, and DDE server for SCADA integration. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial environments with operating temperatures from **0°C to 60°C**.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **Dual HSL Master Controllers:** Each PCI-7852H card contains two independent HSL master controllers, allowing simultaneous control of two separate HSL networks. - **High-Speed Communication:** Operates at up to **6 Mbps** data rate using full-duplex RS-422 with transformer isolation, ensuring reliable and noise-immune communication. - **Deterministic Real-Time Performance:** The I/O scanning period is linearly proportional to the number of connected slave modules, with a base refresh rate of **30.1 µs per module**. A full 63-module network can be scanned in **1.895 ms**. - **Large I/O Capacity:** Each master supports up to **63 slave I/O modules**, and each computer can host up to **8 PCI-7852H cards**, enabling control of over **16,000 I/O points**. - **Easy Wiring and Installation:** Uses standard **RJ45 connectors** and **Cat.5 Ethernet cables**, simplifying wiring and reducing installation costs. - **Self-Diagnostic and Error Handling:** Built-in CRC12 error checking, slave no-response counters, and communication error flags ensure robust network reliability. - **Modular Slave Architecture:** Supports a wide range of HSL slave I/O modules (digital input, digital output, relay, and mixed I/O types) with hot-swappable terminal bases. - **32KB Onboard SRAM:** Dedicated memory for storing I/O status data, enabling fast access via PCI bus without protocol overhead. - **Software Support:** Compatible with Windows 95/98/2000/NT and Linux. Includes DLL drivers, LabVIEW VIs, ISaGRAF SoftPLC drivers, OPC server, and DDE server for SCADA integration.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **High-Speed Distributed I/O Communication:** Supports up to 6 Mbps data rate using full-duplex RS-422 with transformer isolation. The system can scan thousands of I/O points within milliseconds. - **Deterministic Real-Time Operation:** The I/O refresh rate is linearly proportional to the number of connected slave modules, ensuring predictable and repeatable timing for control applications. - **Scalable Architecture:** Each HSL master can control up to 63 slave I/O modules, and a single PC can host up to 16 masters, supporting over 16,000 digital I/O points. - **Flexible Wiring Using Standard Ethernet Cables:** Utilizes RJ45 connectors and Cat.5 100Base-TX cables for simple, cost-effective wiring up to 200 meters per port. - **Self-Diagnostic and Error Handling:** Built-in CRC12 error checking, slave no-response counters, and communication error flags ensure robust and reliable operation. - **Modular Slave I/O Design:** Uniform mechanical design across slave modules allows easy replacement and expansion without system downtime. - **Easy Programming Interface:** Equipped with 32 KB of onboard SRAM for I/O data buffering, accessible directly via PCI bus. No complex communication protocol is required—data is read/written through memory mapping. - **Software Configurable:** Transmission speed and operation mode can be configured via software or DIP switches. - **Comprehensive Software Support:** Includes Windows DLL drivers, Linux drivers, LabVIEW VIs, ISaGRAF SoftPLC drivers, OPC and DDE servers for SCADA integration.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **HSL Communication Protocol:** Fully compatible with ADLINK’s High‑Speed Link (HSL) distributed I/O and motion control architecture. - **Selectable Transmission Speeds:** 3, 6, or 12 Mbps; supports both half‑ and full‑duplex modes. - **On‑board DSP (TMS320C6711):** Handles motion command dispatching, data management, and real‑time control tasks independently of the host CPU. - **4‑Axis Pulse‑Train Output:** Supports stepper, AC/DC servo, linear, or rotary motors. - **Pulse Frequency:** Up to 6.55 MHz per axis. - **Interpolation:** - 2–4 axis linear interpolation - 2‑axis circular interpolation - Multi‑axis continuous contouring for smooth velocity transitions - **Motion Point Table Management:** Up to 2000 motion points stored locally for CPU‑free execution. - **Motion Script Download:** G‑code‑like scripting for autonomous, time‑critical motion sequences. - **Dynamic Motion Control:** Position and speed can be changed on‑the‑fly during operation. - **Home Return Modes:** 13 configurable homing sequences with automatic search. - **Dedicated Motion I/O:** EL, ORG, INP, RDY, SVON, ERC, ALM signals per axis. - **Pulse Output Modes:** OUT/DIR, CW/CCW, or AB‑phase. - **Encoder Feedback:** 28‑bit up/down incremental encoder counter (±134,217,727 pulses). - **Safety & Isolation:** 2500 Vrms isolation on all digital I/O; hardware emergency stop input. - **Backlash Compensation & Vibration Suppression:** Hardware‑based correction and damping functions. - **Software Limits:** Dual programmable software end‑limits per axis. - **Network Scalability:** Up to 15 modules (60 axes) per HSL network. - **CE Certified:** Complies with European EMC and safety standards.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **HSL Communication Protocol:** Fully compatible with ADLINK’s High‑Speed Link (HSL) distributed I/O and motion control network. - **Selectable Transmission Speeds:** 3, 6, or 12 Mbps data rates; supports both half‑duplex and full‑duplex communication modes. - **On‑board DSP (TMS320C6711):** Handles command dispatching, motion sequencing, and data management independently of the host CPU. - **4‑Axis Pulse Train Output:** Supports up to 6.55 MHz pulse frequency for stepper or servo motor control. - **Scalable Network Architecture:** Up to 15 modules (60 axes) can be connected on a single HSL network. - **Advanced Motion Control:** - 2–4 axis linear interpolation - 2‑axis circular interpolation - Continuous contouring for smooth velocity transitions - On‑the‑fly position and speed modification - 13 selectable home return modes - Hardware position compare and trigger output - Automatic backlash compensation - Trapezoidal and S‑curve velocity profiles - **High‑Speed Position Feedback:** 28‑bit up/down incremental encoder interface per axis (±134,217,728 counts). - **Dedicated Motion I/O:** EL, ORG, INP, RDY, SVON, ERC, ALM signals per axis. - **Electrical Isolation:** All digital I/O channels are optically isolated to 2500 Vrms. - **Point Table Management:** Up to 2000 motion points stored locally for CPU‑independent execution. - **Motion Script Download:** Supports G‑code‑like scripting for autonomous, time‑critical motion sequences. - **Software Support:** Includes Motion Creator utility within ADLINK LinkMaster; libraries for DOS, Windows 9x/NT/2000/XP, and Linux.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **HSL Communication Protocol:** Fully compatible with ADLINK’s High‑Speed Link (HSL) distributed I/O and motion control architecture. - **Selectable Transmission Speeds:** 3, 6, or 12 Mbps; supports both half‑duplex and full‑duplex communication modes. - **On‑board DSP (TMS320C6711):** Handles command dispatching, motion sequencing, and data management independently of the host PC. - **4‑Axis Pulse‑Train Control:** Supports stepper, AC/DC servo, linear, or rotary motors via pulse‑train outputs. - **Pulse Output Frequency:** Up to 6.55 MHz for high‑speed motion control. - **Interpolation Capabilities:** - 2–4 axis linear interpolation - 2‑axis circular interpolation - Continuous contouring for smooth velocity transitions - **Dynamic Motion Control:** Position and velocity can be changed on‑the‑fly during motion execution. - **13 Home Return Modes:** Flexible homing sequences for diverse mechanical configurations. - **Motion Point Table Management:** Up to 2000 motion points stored locally for CPU‑independent execution. - **Motion Script Download:** Supports G‑code‑like scripting for autonomous motion sequences. - **Dedicated Motion I/O:** EL, ORG, INP, RDY, SVON, ERC, ALM signals per axis. - **High‑Speed Position Latch & Compare:** Hardware‑based position capture and trigger output with minimal latency. - **Backlash Compensation & Vibration Suppression:** Automatic correction and damping functions for precision motion. - **Isolated I/O:** All digital inputs/outputs are optically isolated to 2500 Vrms. - **Network Scalability:** Up to 15 modules (60 axes) per HSL network. - **Software Support:** Motion Creator utility within LinkMaster, plus C/C++ libraries for Windows and Linux.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **HSL Communication Protocol:** Fully compatible with ADLINK’s High Speed Link (HSL) distributed I/O and motion control network. - **Selectable Transmission Speeds:** 3 Mbps, 6 Mbps, or 12 Mbps data rates. - **Duplex Modes:** Supports both half-duplex and full-duplex communication. - **On-board DSP (TMS320C6711):** Handles motion command processing and data management independently of the host CPU. - **4-Axis Pulse Train Output:** Controls up to four stepper or servo motors simultaneously. - **Scalable Network:** Up to 15 modules (60 axes) can be connected on a single HSL network. - **High Pulse Frequency:** Pulse train output up to 6.55 MHz. - **Interpolation Capabilities:** - 2–4 axes linear interpolation - 2 axes circular interpolation - Continuous contouring for smooth multi-axis motion - **Dynamic Motion Control:** Position and velocity can be modified on-the-fly during motion. - **Motion Point Table Management:** Supports up to 2000 motion points stored locally for reduced CPU load. - **Motion Script Download:** Supports G-code-like scripting for autonomous motion sequences. - **13 Home Return Modes:** Flexible homing configurations for various mechanical setups. - **Dedicated Motion I/O:** Includes EL, ORG, INP, RDY, SVON, ERC, and ALM signals. - **High-Speed Position Latch and Compare:** Hardware-based position compare and trigger output. - **Backlash Compensation & Vibration Suppression:** Automatic correction and damping functions. - **Safety & Isolation:** All digital I/O channels are optically isolated to 2500 Vrms. - **Software Support:** Compatible with ADLINK’s Motion Creator utility and LinkMaster configuration software.

Manufacturer: Adlink Technology Inc.

Category: HSL RT IO System

- **Dual Measurement Capability:** Simultaneous detection of **humidity** (ambient air moisture content) and **wetness** (surface or contact moisture presence). - **Integrated Sensor Design:** Combines two sensing elements within a single housing, reducing installation complexity and wiring requirements. - **Compact Form Factor:** Dimensions of **115 mm (L) × 65 mm (W) × 55 mm (H)** allow for easy integration into confined spaces or existing monitoring systems. - **High Sensitivity and Accuracy:** Designed to deliver precise readings across a wide humidity range and to detect even minimal surface moisture. - **Durable Construction:** Enclosure built for environmental resilience, suitable for industrial, agricultural, and laboratory applications. - **Versatile Mounting Options:** Compatible with wall, panel, or surface mounting configurations. - **Low Maintenance:** Solid-state sensing elements minimize drift and require minimal recalibration. - **Wide Application Range:** Ideal for HVAC systems, greenhouse monitoring, industrial process control, and environmental data logging. - **Easy Integration:** Standardized electrical interface for connection to data acquisition systems, PLCs, or IoT gateways. - **Energy Efficient:** Optimized for low power consumption, suitable for continuous operation or battery-powered systems.

Manufacturer: No category

Category: Smart Sensors

- **Processor Platform:** 6th Generation Intel® Core™ i3‑6100TE (Skylake architecture, dual‑core, 35 W TDP) with Intel® HD Graphics 530 GPU. Supports Intel® Core™ i5‑6500TE and i7‑6700TE variants in the same series. - **Chipset:** Intel® H110 Express chipset (MVP‑6010 series). - **Memory:** Dual‑channel DDR4 SO‑DIMM sockets supporting up to 32 GB DDR4‑2133 MHz memory. - **Display Support:** Up to two independent displays via 2 × DisplayPort, 1 × DVI‑D, and 1 × VGA. Maximum resolutions: - DisplayPort: 4096 × 2304 @ 60 Hz - DVI‑D: 1920 × 1200 @ 60 Hz - VGA: 1920 × 1080 @ 60 Hz - **Expansion Capability:** 1 × PCIe Gen3 x16 slot and 3 × PCI 32‑bit slots for legacy and modern add‑on cards. 1 × Mini‑PCIe slot with USIM socket for wireless or communication modules. - **Networking:** 3 × Intel® I211AT Gigabit Ethernet ports with Wake‑on‑LAN (WOL) and teaming support. - **Serial Communication:** 4 × COM ports (DB‑9): - 2 × software‑selectable RS‑232/422/485 (COM1, COM2) - 2 × RS‑232 (COM3, COM4) - RS‑485 auto‑flow control and 2 kV surge protection on RS‑422/485 lines. - **Digital I/O:** 8‑channel digital input (DI) and 8‑channel digital output (DO), open‑drain MOSFET type, 24 mA per channel. - **USB Connectivity:** 4 × USB 3.0, 2 × USB 2.0 external ports, and 1 × internal USB 2.0 port (all 1600 mA capable). - **Storage Options:** 1 × SATA III 6 Gb/s port for 2.5″ HDD/SSD, and 1 × Type II CFast slot. - **Audio:** 1 × Mic‑in and 1 × Line‑out. - **Power Input:** Wide‑range 12 – 24 V DC input via 3‑pin pluggable connector (V+, GND, V–). Optional 160 W AC‑DC adapter for AC input. - **Mechanical Design:** Fanless aluminum chassis with front‑accessible I/O for simplified maintenance. Wall‑mount kit included. - **Operating Environment:** Fanless operation from 0 °C to 50 °C (with 35 W CPU). Storage temperature: –40 °C to 85 °C (excluding HDD/SSD/CFast). Humidity: 95 % @ 40 °C (non‑condensing).

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series

- **Processor Support:** 6th Generation Intel® Core™ i7/i5/i3 (Skylake) processors; MVP‑6023 specifically equipped with Intel® Core™ i3‑6100TE (dual‑core, 3.2 GHz, 35 W TDP). - **Chipset:** Intel® Q170 Express for extended I/O and industrial‑grade reliability. - **Memory:** Dual‑channel DDR4 SO‑DIMM sockets supporting up to 32 GB DDR4‑2133 MHz. - **Display Capability:** Supports two independent displays via 2 × DisplayPort, 1 × DVI‑D, and 1 × VGA; maximum resolution up to 4096 × 2304 @ 60 Hz. - **Expansion Slots:** - 2 × PCIe Gen3 x8 (mechanical x16 slots with x8 signals) - 2 × PCI 32‑bit/33 MHz slots - 1 × Mini‑PCIe slot with USIM socket - **Networking:** 3 × Intel® I211AT Gigabit Ethernet ports with teaming and Wake‑on‑LAN support. - **Serial Communication:** 4 × COM ports (2 × RS‑232/422/485 software‑selectable, 2 × RS‑232). - **Digital I/O:** 8‑channel digital input and 8‑channel digital output (non‑isolated). - **USB Connectivity:** 4 × USB 3.0, 2 × USB 2.0 external, and 1 × internal USB 2.0 port (all 1600 mA). - **Storage Interfaces:** 1 × SATA III (6 Gb/s) for 2.5″ HDD/SSD, 1 × Type II CFast slot. - **Audio:** 1 × Mic‑in, 1 × Line‑out. - **Power Input:** 12 – 24 V DC wide‑range input via 3‑pin pluggable connector with latch. - **Operating Temperature:** 0 °C – 50 °C (fanless operation with 35 W CPU). - **Mounting:** Wall‑mount kit included. - **Construction:** Rugged fanless aluminum chassis for high MTBF and silent operation.

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series

- **Processor Platform:** 6th Generation Intel® Core™ i5‑6500TE (quad‑core, 2.3 GHz, 35 W TDP) with Intel® H110 chipset. - **Fanless Design:** Completely fanless operation for silent, dust‑resistant, and maintenance‑free performance. - **Memory:** Dual‑channel DDR4 SO‑DIMM sockets supporting up to 32 GB DDR4‑2133 MHz. - **Graphics:** Integrated Intel® HD Graphics 530 supporting dual independent displays. - **Display Interfaces:** 2 × DisplayPort, 1 × DVI‑D, and 1 × VGA, supporting resolutions up to 4096 × 2304 @ 60 Hz. - **Expansion Capability:** - 1 × PCIe Gen3 x16 slot - 3 × PCI 32‑bit slots - 1 × Mini PCIe slot with USIM socket - **Networking:** 3 × Intel® I211AT Gigabit Ethernet ports with teaming and Wake‑on‑LAN support. - **Serial Communication:** 4 × COM ports (2 × RS‑232/422/485 software‑selectable, 2 × RS‑232). - **Digital I/O:** 8‑channel digital input and 8‑channel digital output (non‑isolated). - **USB Connectivity:** 4 × USB 3.0, 2 × USB 2.0 external, and 1 × internal USB 2.0 port (all 1600 mA). - **Storage Options:** 1 × SATA III 6 Gb/s port for 2.5″ HDD/SSD and 1 × Type II CFast socket. - **Audio:** 1 × Mic‑in and 1 × Line‑out. - **Power Input:** Wide‑range 12 – 24 V DC input via 3‑pin pluggable connector with latch. - **Operating Temperature:** 0 °C – 50 °C (fanless operation). - **Mounting:** Wall‑mount kit included. - **Construction:** Rugged aluminum chassis for industrial environments. - **Software Support:** Windows 10 / 7 / Embedded Standard 7 and Linux.

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series

- **Processor Platform:** 6th Generation Intel® Core™ i5‑6500TE (Skylake, 4 cores, 35 W TDP) - **Chipset:** Intel® Q170 Express - **Memory:** Dual‑channel DDR4 SO‑DIMM sockets, up to 32 GB DDR4‑2133 - **Display Support:** Up to two independent displays via 2 × DisplayPort, 1 × DVI‑D, and 1 × VGA - **Expansion Capability:** - 2 × PCIe Gen3 x8 slots (x16 mechanical) - 2 × PCI 32‑bit slots - 1 × Mini‑PCIe slot with USIM socket - **Networking:** 3 × Intel® I211AT Gigabit Ethernet ports with teaming and Wake‑on‑LAN - **I/O Interfaces:** - 4 × COM ports (2 × RS‑232/422/485 software‑selectable, 2 × RS‑232) - 4 × USB 3.0, 2 × USB 2.0 external, 1 × internal USB 2.0 - 8 × Digital Input (DI) and 8 × Digital Output (DO) channels - 1 × Mic‑in, 1 × Line‑out - **Storage:** - 1 × SATA III 6 Gb/s port for 2.5″ HDD/SSD - 1 × Type II CFast socket - **Power Input:** 12 – 24 V DC wide‑range input via 3‑pin pluggable connector - **Operating Temperature:** 0 °C – 50 °C (fanless operation) - **Construction:** Fanless aluminum chassis, front‑accessible I/O, wall‑mountable - **Dimensions:** 220 (W) × 210 (D) × 208.7 (H) mm - **Weight:** 4.7 kg The MVP‑6022 delivers high computing performance with Intel® HD Graphics 530, supports dual independent displays, and provides robust I/O and expansion options for industrial environments requiring reliability and long lifecycle operation.

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series

- **Processor Platform:** 6th Generation Intel® Core™ i7-6700 (65W) Skylake CPU with Intel® H110 chipset. - **Fanless Design:** Completely fanless operation for silent, dust-resistant, and maintenance-free performance. - **Memory Support:** Dual-channel DDR4 SO-DIMM sockets supporting up to 32 GB DDR4 2133 MHz memory. - **Display Capability:** Supports two independent displays via 2× DisplayPort, 1× DVI-D, and 1× VGA outputs. - **Expansion Slots:** - 1× PCIe Gen3 x16 slot - 3× PCI 32-bit slots - 1× internal Mini PCIe slot with USIM socket - **Networking:** 3× Intel® I211AT Gigabit Ethernet ports with teaming and Wake-on-LAN (WOL) support. - **Serial Communication:** 4× COM ports (2× RS-232/422/485 software-selectable, 2× RS-232). - **Digital I/O:** 8-channel digital input and 8-channel digital output. - **USB Connectivity:** 4× USB 3.0, 2× USB 2.0 external ports, and 1× internal USB 2.0 port. - **Storage Options:** 1× SATA III (6 Gb/s) port for 2.5" HDD/SSD and 1× Type II CFast socket. - **Audio Interface:** 1× Mic-in and 1× Line-out. - **Power Input:** Wide-range 12–24 VDC input via 3-pin pluggable connector with latch. - **Operating Temperature:** 0°C to 40°C (for 65W CPU). - **Mounting:** Wall-mount kit included for flexible installation. - **Dimensions:** 220 (W) × 210 (D) × 208.7 (H) mm. - **Weight:** 4.7 kg (10.36 lbs). - **Certifications:** CE, FCC Class A, UL/cUL, CB, CCC compliant.

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series

- **Processor Platform:** 6th Generation Intel® Core™ i7‑6700 (quad‑core, 3.4 GHz base, 4.0 GHz turbo, 65 W TDP) with Intel® Q170 chipset. - **Memory:** Dual‑channel DDR4 SO‑DIMM sockets supporting up to 32 GB DDR4‑2133 MHz memory. - **Display Support:** Up to two independent displays via 2 × DisplayPort, 1 × DVI‑D, and 1 × VGA. Maximum resolutions: - DisplayPort: 4096 × 2304 @ 60 Hz - DVI‑D: 1920 × 1200 @ 60 Hz - VGA: 1920 × 1080 @ 60 Hz - **Expansion Capability:** 4 total slots: 2 × PCIe Gen3 x8 (x16 mechanical) and 2 × PCI 32‑bit slots. - **Networking:** 3 × Intel® I211AT Gigabit Ethernet ports with teaming and Wake‑on‑LAN support. - **Serial Communication:** 4 × COM ports (2 × RS‑232/422/485 software‑selectable, 2 × RS‑232), with 2 kV surge protection on RS‑422/485 lines. - **Digital I/O:** 8‑channel digital input and 8‑channel digital output (open‑drain MOSFET, 24 mA sink/source). - **USB Connectivity:** 4 × USB 3.0, 2 × USB 2.0 external, and 1 × internal USB 2.0 port (all 1600 mA). - **Storage Interfaces:** 1 × SATA III 6 Gb/s port for 2.5″ HDD/SSD, 1 × Type II CFast slot, and 1 × Mini‑PCIe slot with USIM socket. - **Audio:** 1 × Mic‑in and 1 × Line‑out. - **Power Input:** Wide‑range 12 – 24 V DC input via 3‑pin pluggable connector (V+, GND, V–). - **Operating Environment:** Fanless operation from 0 °C – 40 °C (with 65 W CPU). - **Mechanical Design:** Rugged aluminum chassis with wall‑mount kit included; front‑accessible I/O for simplified maintenance. - **Reliability:** Fanless design eliminates moving parts, improving MTBF and reducing maintenance in harsh environments.

Manufacturer: Adlink Technology Inc.

Category: Adlink M-Series