- **Ethernet Connectivity:** 10/100 Mbps auto‑negotiating Ethernet interface (IEEE 802.3/802.3u) with RJ‑45 connector. - **Protocol Support:** Native Modbus/TCP server; also supports UDP for broadcast data streaming and event reporting to up to eight hosts. - **Digital I/O Configuration:** - 12 × Isolated Digital Inputs (wet contact, single‑ended, common source/ground). - 6 × Isolated Digital Outputs (open‑collector NPN type). - **Isolation Protection:** 3000 V DC optical isolation between I/O and logic circuits. - **Smart Functions:** - DI latch and 32‑bit counter (1 kHz) per input channel. - DO pulse output and delay output modes. - Auto‑off timer for digital outputs. - Local DI‑to‑DO mirroring for hardware signal replication. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Compatible with ExpertDAQ Windows Utility, Modbus/TCP OPC servers, and ActiveX/DLL APIs for custom application development. - **Flexible Mounting:** DIN‑rail, wall, or stack mounting options. - **Industrial Reliability:** Wide operating temperature range (‑25 °C to +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet‑based Distributed I/O:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) with RJ‑45 interface for direct network integration. - **Modbus/TCP and UDP Protocols:** Fully compatible with Modbus/TCP over TCP/IP and UDP for open connectivity with PLCs, SCADA, and HMI systems. - **5 Isolated Digital Inputs:** Accepts dry or wet contact signals with optical isolation up to 3750 Vrms. - **3 Relay Outputs:** RL1 (Form A), RL2 and RL3 (Form C) rated 0.6 A @ 125 VAC / 2 A @ 30 VDC. - **Input Latch and Counter Functions:** Each DI channel supports latch and 32‑bit counter (up to 500 Hz). - **Pulse Output and Delay Output:** Relay outputs support programmable pulse and delay timing. - **DIO Synchronization (Mirror Function):** Local DI states can be mirrored to DO channels for direct hardware interlocking. - **Auto‑Off Timer:** Configurable timeout for digital outputs to ensure safe operation. - **High Isolation and Surge Protection:** 3750 Vrms I/O isolation, 500 V surge strength on relay contacts. - **Smart Functions:** Built‑in watchdogs, power‑on/safe values, and dual watchdog (module + host) protection. - **Web Server Interface:** Embedded HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** Dual 10/100 Mbps RJ‑45 ports with built‑in Ethernet switch for daisy‑chain networking. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 s during power loss of intermediate modules. - **Industrial Protocols:** Full Modbus/TCP over TCP/IP and UDP support for open integration with controllers and SCADA/HMI software. - **Mixed I/O Design:** Combines multiple digital input and output types in one compact module for cost‑effective deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry for noise immunity and safety. - **DIO Synchronization:** “Mirror” function allowing local or remote DO channels to follow DI states (match/mismatch latch modes). - **Auto‑Off Time Mode:** Monostable output operation—DO returns to safe state after a preset time. - **High/Low Delay Output:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On & Safe Values:** User‑definable output states at power‑up or host watchdog timeout. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by TOPSCCC TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial mechanical design for panel or cabinet installation. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Ethernet‑based I/O:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) for seamless integration into existing LAN or industrial Ethernet networks. - **Protocol Support:** Fully compatible with **Modbus/TCP** over TCP/IP and **UDP/IP** for open connectivity with PLCs, HMIs, and SCADA systems. - **Smart I/O Functions:** - Digital Inputs: Counter and totalizer functions (up to 1 kHz typical). - Digital Outputs: Pulse and delay output modes with programmable auto‑off timers. - DIO synchronization (mirror local DI to DO). - **Multi‑I/O Integration:** Combines 6 differential digital inputs, 2 open‑drain digital outputs, and 2 counter/frequency channels in one compact module. - **High Isolation:** 2000–3000 V DC isolation between I/O channels and communication circuitry for robust industrial protection. - **Web‑based Monitoring:** Built‑in web server for remote configuration and real‑time I/O monitoring via standard browsers. - **Software Ecosystem:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for integration with Visual Basic, C++, Delphi, and SCADA/OPC systems. - **Industrial‑grade Design:** Wide operating temperature range (‑25 °C to +75 °C), DIN‑rail or wall mounting, and ABS enclosure with LED indicators.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Integrated Modbus TCP/IP Server:** Fully compliant with Modbus/TCP protocol for open connectivity to PLCs, HMIs, and SCADA systems. - **Dual Ethernet Protocols:** Supports both TCP/IP and UDP/IP for flexible communication; UDP streaming to up to 8 remote hosts. - **PoE Powering:** IEEE 802.3af/at compatible Power‑over‑Ethernet eliminates separate DC wiring. - **Isolated I/O Channels:** - 6 digital inputs, dry/wet contact selectable, optically isolated. - 6 relay outputs (Form A), rated 0.6 A @ 125 VAC / 2 A @ 30 VDC. - **DIO Synchronization:** “Mirror” function allows local DI states to be reflected automatically to DO channels. - **Auto‑Off Timer:** Programmable timeout for digital outputs to ensure safe state on communication loss. - **Smart Functions:** - DI counters and latch functions. - DO pulse and delay output modes. - Built‑in watchdogs (module and host). - **Web Server:** Embedded HTTP server for browser‑based monitoring and control. - **Software Integration:** Windows configuration utility, ActiveX (TCPDAQ.OCX), and DLL API for Visual Basic, C/C++, Delphi, and C++ Builder. - **Industrial Design:** Compact ABS enclosure with DIN‑rail, wall, or stack mounting; LED indicators for power, link, and I/O status. - **High Isolation:** 1500 V DC Ethernet isolation and up to 3000 V DC I/O channel isolation. - **Wide Operating Range:** –25 °C to +75 °C, 5–95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** 10BASE‑T / 100BASE‑TX IEEE 802.3 compliant interface with RJ‑45 connector. - **Protocol Support:** Native Modbus/TCP server over TCP/IP and UDP; compatible with most SCADA, PLC, and HMI systems. - **I/O Configuration:** - 6 × Isolated Digital Inputs (Dry/Wet contact selectable). - 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Isolation Protection:** 2000 – 3750 V DC isolation between I/O channels and logic. - **Smart Functions:** - Digital input latch and counter (up to 500 Hz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development. - **Mounting Options:** DIN‑rail, wall, or stack mounting. - **Industrial Design:** ABS enclosure with captive hardware, LED indicators for power, CPU, and communication status. - **Power Supply:** 10 – 30 V DC unregulated input with over‑voltage and reverse‑polarity protection. - **Environmental Robustness:** Operating temperature –25 °C to +75 °C; humidity 5 – 95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet‑based I/O:** 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards. - **Protocol Support:** Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts. - **Power over Ethernet (PoE):** Simplifies installation by combining power and data over a single Cat 5/5e cable. - **Isolated I/O Channels:** - 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated). - 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Smart Functions:** - DI counter and latch functions. - DO pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **High Isolation:** 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development. - **Industrial Reliability:** Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure. - **Mounting Flexibility:** DIN‑rail, wall, or stack mounting options.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) with RJ‑45 interface for seamless integration into existing LANs or new Ethernet-based control systems. - **Protocol Support:** Fully compatible with Modbus/TCP over TCP/IP and UDP, enabling open communication with standard industrial controllers and SCADA/HMI software. - **I/O Configuration:** - 6 × Isolated Digital Inputs (Dry/Wet contact selectable) - 6 × Relay Outputs (Form A, 0.6 A @ 125 VAC / 2 A @ 30 VDC) - **Isolation & Protection:** - I/O isolation up to 2000–3000 V DC - Ethernet communication isolation 1500 V DC - Over‑voltage and reverse‑polarity protection on power input - **Smart Functions:** - DIO synchronization (mirror local DI to DO) - Auto‑off timer for digital outputs - Counter and latch functions on digital inputs - Pulse and delay output modes on digital outputs - **Software Integration:** - Built‑in Modbus/TCP server firmware - Windows configuration utility and DLL/ActiveX libraries - Supports OPC, HMI, and custom application development - **Mounting Options:** DIN‑rail, wall, or stack mounting supported. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** 10/100 Mbps Ethernet interface (IEEE 802.3 10BASE‑T / 100BASE‑TX) with RJ‑45 connector. - **Protocol Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP; supports ASCII command interface via UDP port 1025. - **I/O Configuration:** - 7 isolated digital input channels (dry/wet contact selectable). - 3 relay output channels (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Isolation:** 3750 Vrms optical isolation between I/O and logic; 1500 V DC Ethernet isolation. - **Smart Functions:** - Digital input latch and 32‑bit counter (up to 500 Hz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browser. - **Software Integration:** Compatible with ExpertDAQ Windows Utility, Modbus/TCP OPC servers, and ActiveX/DLL APIs for custom application development. - **Mounting Options:** DIN‑rail, wall, or stack mounting. - **Industrial Design:** ABS enclosure with captive mounting hardware; LED indicators for power, link, and communication status. - **Power Supply:** 10 – 30 V DC unregulated input with over‑voltage and reverse‑polarity protection. - **Operating Environment:** −25 °C to +75 °C, 5 – 95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Mixed I/O Integration:** Combines 7 isolated digital inputs and 4 relay outputs in one module, reducing system complexity and cost. - **Dual Ethernet Ports with Daisy‑Chain Topology:** Built‑in 10/100 Mbps Ethernet switch allows cascading multiple modules without external switches. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 second during power loss of an intermediate module. - **Industrial Modbus/TCP Protocol:** Fully compliant with Modbus/TCP over TCP/IP and UDP for open connectivity with PLCs, SCADA, and HMI systems. - **DIO Synchronization (Mirror Function):** Mirrors local DI states to local or remote DO channels for real‑time signal replication. - **DO Auto‑Off Time Mode:** Enables monostable output operation—DO returns to default state after a preset time. - **High/Low Delay Output Modes:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On and Safe Values:** User‑definable output states at power‑up or host watchdog timeout for fail‑safe operation. - **Web Server Functionality:** Embedded HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by TOPSCCC’s TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial‑grade mechanical design for panel or cabinet installation. - **High Isolation:** 3750 Vrms optical isolation between channels and logic circuitry. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Dual Ethernet Ports with Daisy‑Chain Topology:** Integrated 10/100 Mbps Ethernet switch with auto‑bypass protection allows daisy‑chain networking. If a module loses power, the network automatically recovers within ~1 s, maintaining communication continuity. - **Industrial Modbus/TCP and UDP Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP/IP for open interoperability with controllers, HMIs, and SCADA software. Supports up to eight UDP data stream destinations. - **Mixed I/O Architecture:** Combines digital inputs and outputs in one compact module, reducing system cost and simplifying distributed I/O deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry ensures robust protection against electrical noise and ground loops. - **DIO Synchronization (Mirror DI to Local/Remote DO):** Enables automatic mirroring of input states to local or remote outputs, supporting both “DI match DO latch” and “DI mismatch DO latch” modes. - **DO Auto‑Off Time Mode:** Configurable monostable output operation—after a preset time, the output automatically returns to its stable state. - **High/Low Delay Output Modes:** Programmable delay for transitions from low‑to‑high or high‑to‑low output states, useful for sequencing and timing control. - **Power‑On and Safe Values:** User‑defined output states at power‑up or upon host watchdog timeout, ensuring predictable and safe system behavior. - **Comprehensive Software Ecosystem:** Includes Windows configuration utility, Modbus/TCP OPC server, DLL and ActiveX libraries (TCPDAQ), and ASCII command interface for custom integration. - **Built‑in Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Ethernet Connectivity:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) with RJ45 interface. - **Protocol Support:** Fully compatible with Modbus/TCP and UDP/IP protocols for open industrial connectivity. - **I/O Configuration:** - 8 isolated digital inputs (dry/wet contact selectable). - 8 isolated digital outputs (open drain P-MOSFET, 30 VDC, 1 A per channel). - **Isolation Protection:** 3000 VDC optical isolation between I/O channels and logic circuitry. - **Smart Functions:** - Digital input latch and counter (32-bit, 1 kHz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto-off timer for digital outputs. - **Web Server:** Built-in HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** - Windows configuration utility. - ActiveX and DLL API libraries for custom application development. - Modbus/TCP and ASCII command support. - **Mounting Options:** DIN-rail, wall, or stack mounting. - **Industrial Design:** Rugged ABS enclosure with LED indicators for power, communication, and I/O status. - **Power Supply:** Operates from unregulated 10–30 VDC with over-voltage and reverse polarity protection. - **Operating Range:** -25°C to +75°C, 5–95% RH non-condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Three Thermocouple Inputs:** Supports J and K type thermocouples using Maxim MAX31855 converters with built-in cold junction compensation for precise temperature measurement. - **High Resolution and Accuracy:** 14-bit resolution with 0.25°C measurement precision ensures reliable thermal data acquisition. - **Integrated Web Server:** Built-in web interface with AJAX support for real-time temperature monitoring and digital I/O control via standard browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for seamless integration with PLCs, SCADA systems, and industrial controllers. - **Digital and Relay I/O:** Includes two isolated digital inputs (2500 Vrms isolation) and one Form C relay output (30VDC@1A or 125VAC@0.5A). - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with built-in surge and polarity protection. - **Compact Industrial Design:** 78 × 108 × 25 mm enclosure suitable for DIN-rail mounting (optional DK-35A kit). - **Software Utility:** Windows-based configuration and management utility for network discovery, setup, and firmware updates. - **Web-Based Configuration:** Supports AJAX commands for reading/writing I/O data and configuring thermocouple channels. - **Thermocouple Fault Detection:** Detects open, short-to-ground, and short-to-VCC conditions for enhanced reliability. - **Cross-Platform Integration:** Compatible with Artila’s IoT gateways and Node-RED for cloud connectivity and visual flow programming.

Manufacturer: Artila

Category: Automation Controller

- **Remote Thermocouple Input Module:** Supports 3 channels of J or K type thermocouples with cold junction compensation for accurate temperature measurement. - **High-Resolution Measurement:** 14-bit resolution with 0.25°C accuracy, ensuring precise thermal data acquisition. - **Integrated Web Server:** Built-in web interface supporting AJAX for real-time monitoring and control via standard web browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for integration with PLCs, SCADA systems, and industrial automation networks. - **Digital I/O Capabilities:** Two isolated digital inputs (2500 Vrms isolation) and one Form C relay output for control and alarm signaling. - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with surge and polarity protection. - **Compact DIN-Rail Mountable Design:** Optional DK-35A DIN-rail mounting kit for easy installation in control panels. - **Windows Configuration Utility:** Simplifies setup, configuration, and firmware management. - **Bluemix and IoT Gateway Ready:** Compatible with IBM Bluemix and Node-RED for cloud integration and IoT data flow management. - **Thermocouple Fault Detection:** Built-in detection for open, short-to-ground, and short-to-VCC conditions. - **Web-Based Configuration and Control:** Supports AJAX commands for fetching values, setting relay outputs, and configuring thermocouple channels.

Manufacturer: Artila

Category: Automation Controller

- **8 Isolated Analog Input Channels:** Each channel supports 16-bit resolution with configurable voltage or current input modes. - **High Electrical Isolation:** 2500 Vrms channel-to-channel and 1500 VDC isolation ensures robust protection against electrical interference. - **Relay Output:** One Form A or Form B relay output channel rated at 30 VDC @ 1 A or 125 VAC @ 0.5 A for control signaling. - **Ethernet Connectivity:** Integrated 10/100 Mbps RJ45 port with 1.5 kV magnetic isolation for reliable network communication. - **Protocol Support:** Modbus/TCP, UDP, HTTP, and DHCP for flexible integration with PLCs, SCADA, and IoT gateways. - **Web-Based I/O Control:** Built-in AJAX-enabled web server allows real-time monitoring and control via standard browsers. - **Windows Configuration Utility:** Simplifies device discovery, configuration, and firmware management. - **DIN-Rail Mounting:** Compact form factor with optional DK-35A DIN-rail mounting kit for industrial panel installations. - **Wide Power Input Range:** Operates from 9 VDC to 48 VDC with surge and polarity protection. - **Bluemix and Node-RED Ready:** Compatible with IBM Bluemix and Node-RED for rapid IoT application development.

Manufacturer: Artila

Category: Automation Controller

- **C Programmable Remote I/O Module:** Allows users to develop custom firmware using C language for flexible control and data processing. - **8 Isolated Analog Input Channels:** Each channel supports differential input with 16-bit resolution and 2500VDC isolation for high-accuracy signal acquisition. - **Wide Input Range:** Configurable for unipolar, bipolar, and current input modes: - Unipolar: 0–150mV, 0–500mV, 0–1V, 0–5V, 0–10V - Bipolar: ±150mV, ±500mV, ±1V, ±5V, ±10V - Current: 0–20mA - **Relay Output:** One channel, Form A or Form B, rated at 30VDC@1A or 125VAC@0.5A. - **Ethernet Connectivity:** 10/100Mbps RJ45 port with 1.5KV magnetic isolation for reliable network communication. - **Web-Based Control:** Integrated tiny web server for remote configuration, monitoring, and control via browser. - **Software Stack:** Supports lwIP, BSD socket library, and standard TCP/IP protocols (IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, HTTP). - **Windows Configuration Utility:** Simplifies device setup, firmware updates, and network configuration. - **Industrial-Grade Design:** DIN-rail mountable, wide power input range (9–48VDC), and surge/polarity protection. - **Toolchain Compatibility:** Supports Sourcery CodeBench Lite and Keil ARM development environments. - **IoT Integration:** Compatible with Node-RED for graphical flow-based programming and cloud connectivity via MQTT and RESTful APIs.

Manufacturer: Artila

Category: Automation Controller

Model number shown in 9188X8D information setting utility.

Embedded data acquisition module model number shown in the 9188X8D Information Setting Utility as 9188A8. The document does not provide separate hardware specifications from Ex9188A8D.

Manufacturer: TOPSCCC

Category: No category

- **True RMS Measurement:** Provides accurate measurement of AC power independent of waveform distortion, ensuring reliable readings even with non-sinusoidal loads. - **Measurement Range:** 0 to 100 VA, suitable for low-power AC circuits and instrumentation applications. - **Analog Output:** Linear output signal of 0 to 5 V DC corresponding to the measured power range, enabling easy interfacing with PLCs, data acquisition systems, or analog input modules. - **Galvanic Isolation:** The output is electrically isolated from the measurement circuit, enhancing safety and minimizing interference or ground loop issues. - **External Modular Design:** Housed in an external modular enclosure (Anreihgehäuse) for convenient installation alongside other control or measurement modules. - **Compact and Robust Construction:** Designed for industrial environments, offering mechanical stability and long-term reliability. - **Ease of Integration:** Standardized output and form factor allow seamless integration into existing monitoring and control systems. - **Low Maintenance:** Solid-state measurement circuitry with minimal drift and no moving parts ensures long operational life and low maintenance requirements.

Manufacturer: No category

Category: Other Modules

- **True RMS Measurement:** Provides accurate measurement of real power (RMS) independent of waveform distortion or harmonic content. - **Measurement Range:** 0 to 1 kVA (kilovolt-ampere), suitable for small to medium power systems. - **Analog Output:** 0 to 5 V DC output signal proportional to measured power. - **Galvanic Isolation:** Electrical isolation between input and output circuits ensures safety and prevents ground loops. - **External Module Design:** Housed in an external enclosure for easy integration into existing systems. - **DIN Rail Mounting:** Designed for quick installation in control cabinets or switchboards. - **High Accuracy and Stability:** True RMS conversion ensures precise readings even under non-sinusoidal load conditions. - **Compact and Robust Construction:** Built for industrial environments with durable housing and reliable connectors. - **Ease of Integration:** Compatible with standard analog input devices such as PLCs, data loggers, and monitoring systems. - **Low Maintenance:** Solid-state design with minimal calibration requirements.

Manufacturer: No category

Category: Other Modules

- **True RMS Measurement:** Provides precise measurement of real power (in VA) independent of waveform distortion, ensuring accuracy even with non-sinusoidal loads. - **Measurement Range:** 0 to 200 VA, optimized for low- to medium-power AC systems. - **Analog Output:** 0 to 5 V DC output signal proportional to the measured power, enabling easy interfacing with PLCs, data acquisition systems, or analog input modules. - **Galvanic Isolation:** The output is electrically isolated from the measurement circuit, ensuring safety and preventing ground loops or interference between measurement and control systems. - **External Module Design:** Housed in a robust external enclosure for easy installation and integration into existing systems. - **DIN-Rail Mountable (Anreihgehäuse):** Designed for standard industrial mounting, allowing quick installation in control cabinets. - **Compact and Modular:** Small footprint suitable for distributed measurement points or modular system architectures. - **High Accuracy and Stability:** True RMS conversion ensures consistent performance across varying load conditions and frequencies. - **Low Output Impedance:** Ensures stable signal transmission over longer cable runs. - **Industrial-Grade Reliability:** Built for continuous operation in industrial environments with stable performance under temperature and electrical noise variations.

Manufacturer: No category

Category: Other Modules

- **True RMS Measurement:** Provides accurate measurement of AC power regardless of waveform distortion, ensuring precise readings even with non-sinusoidal loads. - **Measurement Range:** 0 to 500 VA, suitable for low- to medium-power AC circuits. - **Analog Output:** Linear output signal of 0 to 5 V DC proportional to measured power, enabling easy interfacing with PLCs, data acquisition systems, or analog input modules. - **Galvanic Isolation:** Output is electrically isolated from the measurement circuit, enhancing safety and reducing interference in control systems. - **External Module Design:** Housed in a compact, external DIN-rail mountable enclosure for easy integration into existing electrical panels. - **High Accuracy and Stability:** Designed for consistent performance across a wide range of operating conditions. - **Plug-and-Play Integration:** Simple wiring and standardized output make it compatible with a broad range of industrial monitoring and automation systems. - **Robust Construction:** Industrial-grade housing and components ensure long-term reliability in demanding environments. - **Low Power Consumption:** Efficient internal circuitry minimizes energy loss and heat generation. - **Maintenance-Free Operation:** Solid-state design with no moving parts or calibration drift under normal operating conditions.

Manufacturer: No category

Category: Other Modules

- **Isolated Analog Input:** The input channel is galvanically isolated from the communication and power circuits, ensuring protection against ground loops, electrical noise, and potential differences between measurement and control systems. - **Voltage Input Range:** Accepts analog voltage signals up to ±10 V, suitable for a wide range of sensors, transducers, and signal sources. - **High Resolution:** 15-bit analog-to-digital conversion provides fine measurement granularity and high precision in signal acquisition. - **RS232 Communication Interface:** Standard serial interface for data transmission, compatible with most PCs, industrial controllers, and serial communication devices. - **ASCII Output Format:** Data is transmitted in human-readable ASCII format, simplifying integration with software applications, terminal programs, and custom data logging systems. - **Compact Modular Design:** Designed as a standalone or system-integrated module for flexible installation in measurement and control environments. - **Industrial-Grade Reliability:** Built for continuous operation in demanding environments, with robust electrical isolation and stable performance over time. - **Ease of Integration:** Simple serial communication protocol and standardized voltage input make it easy to integrate into existing measurement or automation systems.

Manufacturer: Contec

Category: RS232 Measure And Control Modules

- **15 Configurable Digital Channels:** Each of the 15 channels can be independently configured as a digital input or digital output, allowing flexible adaptation to various control and monitoring tasks. - **RS232 Serial Communication:** Standard RS232 interface for direct connection to PCs, PLCs, or other serial devices. - **ASCII Protocol:** Simple ASCII-based communication protocol for easy integration with custom software, terminal programs, or SCADA systems. - **Compact Modular Design:** Small form factor suitable for panel mounting or integration into existing control cabinets. - **Bidirectional I/O Capability:** Supports both input signal acquisition and output signal control within the same module. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial environments, ensuring stable performance and long service life. - **Flexible Power and Signal Handling:** Compatible with standard digital logic levels, enabling connection to sensors, switches, relays, and actuators. - **Ease of Integration:** Plug-and-play serial connectivity simplifies setup and reduces wiring complexity. - **Scalable System Architecture:** Multiple modules can be connected to expand the number of I/O points in a distributed control system.

Manufacturer: Contec

Category: RS232 Measure And Control Modules

- **15 Configurable Digital Channels:** Each of the 15 channels can be independently configured as a digital input or digital output, allowing flexible adaptation to various control and monitoring tasks. - **RS485 Communication Interface:** Supports half-duplex serial communication over RS485, enabling multi-drop network configurations and long-distance data transmission (up to 1200 meters depending on cable and environment). - **ASCII Protocol Support:** Utilizes a simple ASCII-based communication protocol for easy integration with PCs, PLCs, and other controllers without the need for complex drivers or proprietary software. - **Modular Design:** Designed for use in modular data acquisition systems, allowing multiple modules to be networked together for expanded I/O capacity. - **Industrial-Grade Construction:** Built for durability and reliability in harsh industrial environments, with robust electrical isolation and protection against noise and interference. - **Flexible Power and Signal Configuration:** Supports a range of input signal types and output drive capabilities, suitable for interfacing with sensors, switches, relays, and actuators. - **Compact Form Factor:** Space-efficient design suitable for DIN rail or panel mounting in control cabinets. - **LED Status Indicators:** Provides visual feedback for power, communication activity, and channel status, simplifying diagnostics and maintenance. - **Scalable Network Integration:** Multiple C1712 modules can be connected on a single RS485 bus, each with a unique address, enabling distributed I/O architectures.

Manufacturer: Contec

Category: RS485 DIN Rail IO Modules

- **Isolated 4–20 mA Analog Input:** Designed for current loop signal acquisition, compatible with standard industrial sensors and transmitters. - **High Resolution (15-bit):** Enables precise measurement and conversion of analog current signals into digital data for accurate monitoring and control. - **RS232 Communication Interface:** Provides serial ASCII output for easy integration with PCs, PLCs, data loggers, or other serial communication devices. - **Galvanic Isolation:** Electrical isolation between input and output circuits enhances safety and prevents signal degradation due to ground potential differences. - **Compact Modular Design:** Suitable for panel mounting or integration into distributed measurement systems. - **ASCII Data Output Format:** Simplifies data parsing and integration with software systems or custom applications. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust electrical and mechanical characteristics. - **Low Power Consumption:** Optimized for efficiency in embedded or distributed measurement networks.

Manufacturer: Contec

Category: RS232 Measure And Control Modules