Our Products
including Archiv • Page: 12
Sub categories
3.3.2.4 | PI-32B(PC)H | Opto-isol. 32 chan DI ISA Card w on-board power | phased out | |
3.3.2.4 | PIO-16/16TB(PC) | Opto-isol. 16/16 DIO ISA Card, fast (1µs), w on-board power | phased out | |
3.3.3.2 | PCI-8554 | PCI 12*Timer/Counter Card |
496,00 € (w/o VAT) |
|
3.3.3.3 | cPCI-8554 | cPCI 12*Timer/Counter Card |
636,00 € (w/o VAT) |
|
3.3.3.3 | cPCI-8554R | cPCI 12*Timer/Counter rear IO Card | call | |
3.3.3.4 | ACL-8454/12 | ISA 12*Timer/Counter 16/8 DIO Card with 4*8254 |
237,00 € (w/o VAT) |
|
3.3.3.4 | ACL-8454/6 | ISA 6*Timer/Counter 16/8 DIO Card with 2*8254 | check ACL-8454/12 | |
3.3.3.4 | PET-48DIO | 48 DIO Card, 8255 mode 0 compatible | phased out, check ACL-7122 | |
3.3.4.1 | PCIe-8154 | PCIe 4-axis servo and stepper motion controller |
925,00 € (w/o VAT) |
|
3.3.4.1 | PCIe-8158 | PCIe 8-axis servo and stepper motion controller |
1.763,00 € (w/o VAT) |
|
3.3.4.1 | PCIe-8332 | PCIe*1 16-axis EtherCAT Master Motion Controller |
1.084,00 € (w/o VAT) |
|
3.3.4.1 | PCIe-8334 | PCIe*1 32-axis EtherCAT Master Motion Controller |
1.173,00 € (w/o VAT) |
|
3.3.4.1 | PCIe-8338 | PCIe*1 64-axis EtherCAT Master Motion Controller |
1.675,00 € (w/o VAT) |
|
3.3.4.1 | LPCIe-8124-C | LPCIe 4 channels encoder motion Card |
1.038,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8254 | PCI 4 axis PWM servos steppers advanc. motion 16/16DIO Card |
1.885,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8258 | PCI 8 axis PWM servos steppers advanc. motion 16/16DIO Card |
2.823,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8102 | PCI 2 axis encoder motion Card |
673,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8124-C | PCI 4 channels encoder motion Card |
1.090,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8124 | PCI 4 channels encoder motion board | use PCI-8124-C | |
3.3.4.2 | PCI-8133 | PCI 3 channels encoder motion Card | phased out, check PCI-9221 | |
3.3.4.2 | PCI-8132 | PCI 2 axis motion control Card | phased out, use PCI-8102 | |
3.3.4.2 | PCI-8134A | PCI 4 axis motion control Card |
918,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8134 | PCI 4 axis motion control board | use PCI-8134A | |
3.3.4.2 | PCI-8136 | 6-CH Quadrature Encoder and Multi-function IO Card | EOL, check PCI-8136CJ | |
3.3.4.2 | PCI-8144 | PCI cost-effective 4 axis stepping motion control Card | call | |
3.3.4.2 | PCI-8154 | PCI cost-effective 4 axis motion control Card | use PCIe-8154 | |
3.3.4.2 | PCI-8158 | PCI cost-effective 8 axis motion control Card | use PCIe-8158 | |
3.3.4.2 | PCI-8164 | PCI advanced 4 axis motion control Card |
1.260,00 € (w/o VAT) |
|
3.3.4.2 | PCI-8174 | UPCI advanced 4 axis motion control ASIC Card | EOL, call | |
3.3.4.2 | PCI-8253 | PCI DSP 3 axis motion control Card | EOL, call | |
3.3.4.2 | PCI-8256 | PCI DSP 6 axis motion control Card | EOL, call | |
3.3.4.2 | PCI-8366 | PCI 6 axis SSCNet motion control Card | EOL, call | |
3.3.4.2 | PCI-8372 | PCI 12 axis SSCNet motion control Card | EOL, call | |
3.3.4.3 | PXI-8164 | PXI Advanced 4 axis Motion Control Card | EOL, check PCI-8164 | |
3.3.4.5 | EU-Series | EtherCAT Slave System | Request a quote | |
3.4.1 | DIN-50P-01 | 50pin header termination board DIN rail | call | |
3.4.1 | DIN-20P-01 | 20pin header termination board DIN rail | call | |
3.4.1 | DIN-37D-01 | 37pin D-type panel DIN rail w/o cable |
80,00 € (w/o VAT) |
|
3.4.1 | DIN-37D/2m | 37pin D-type panel DIN rail 2m cable | use DIN-37D-01 | |
3.4.1 | DIN-50S-01 | 50pin SCSI-II termination board w/o cable DIN rail |
93,00 € (w/o VAT) |
|
3.4.1 | DIN-68S-01 | 68pin SCSI-II termination board DIN rail w/o cable |
70,00 € (w/o VAT) |
|
3.4.1 | DIN-68S | 68pin SCSI-II termination board DIN rail | use DIN-68S-01 | |
3.4.1 | DIN-68S/1M | 68pin SCSI-II termination board DIN rail (DAQ-2000 series) | use DIN-68S-01 | |
3.4.1 | DIN-68S/1S | 68pin SCSI-II termination board DIN rail (PCI-7256) | use DIN-68S-01 | |
3.4.1 | DIN-68H-01 | 68pin term. board 50 Ohm DIN rail (PCIe-7350) w/o cable |
201,00 € (w/o VAT) |
|
3.4.1 | DIN-100S-01 | 100pin SCSI-II termination board DIN rail w/o cable |
96,00 € (w/o VAT) |
|
3.4.1 | DIN-100S | 100pin SCSI-II termination board DIN rail | use DIN-100S-01 | |
3.4.1 | DIN-502S | 2*50pin SCSI-II termination board DIN rail | EOL, call | |
3.4.2 | ACLD-9137-01 | Direct 37 small screw terminal | call | |
3.4.2 | ACLD-9137F-01 | Direct 37 f small screw terminal |
52,00 € (w/o VAT) |
There are no categories here at the moment.
acceed news

The successful NRU series for edge AI applications from German distributor Acceed has received a special addition. The already fanless chassis design for operation at high temperatures has been further optimised thanks to an unusual redesign. The now full-surface, flat heat sink maximises cooling efficiency across the entire top of the housing, allowing the controller to be used in closed housings or confined spaces with reduced airflow. The robust NRU-154PoE-FT has four GbE interfaces (2.5 Gb) with PoE and is designed for operation in ambient temperatures from -25 to +60 °C.

PCIe-DAQ cards (Peripheral Component Interconnect Express - Data Acquisition Cards) are a key technology in measurement applications and form the high-performance interface for digital signal processing and data acquisition. The new PCIe-9100 series multiplexer DAQ cards from Adlink, which are now available from German distributor Acceed, have been developed for use in demanding industrial measurement and control systems. They combine high input resolution for precise data acquisition with a choice of different channel counts and configurations, making them a preferred choice for demanding applications, for example in data analysis, development, performance control or automation.

Box PCs and embedded controllers often have to be installed in very small spaces or in tight control cabinets. The limited space is a challenge for heat dissipation. Inadequate temperature management can quickly lead to problems with performance and operational reliability. The new POC-700-FT controller, now available from German distributor Acceed, offers an efficient solution. The innovative design with the newly developed full-surface, flat heat sink maximises cooling efficiency via the housing surface and allows safe fanless operation in industrial environments.

Computers for the intelligent control of unmanned vehicles and stationary robots, also in industrial surroundings for a longer period with AI-based applications. However, manufacturers and constructors are faced with a special type of challenge when handling flying devices, e.g. drones which are applied in an industrial context. The weight of all components then plays a supporting role in the literal sense. Specifically tailored to such applications, the German distributor Acceed has now added the ultralight box computer FLYC-300 from the experienced manufacturer Neousys to its programme. With its flyweight of a mere 297 grams and an AI processor power of 100 TOPS, the controller is suitable for various applications in unmanned systems, in particular airborne vehicles, but also agricultural machinery and autonomous mobile robots of a smaller size, to name just a few further examples.

As their name already indicates, access points basically only have one simple task: the extension of the network via radio technology in an efficient manner with access points. However, within industrial surroundings, higher requirements must be met, including temperature tolerance, robustness and safety. Last but not least, the speed plays an important role for successful data communication in virtually all business fields. The German distributor Acceed has now incorporated the new high-speed access point IAP-1800AX from Planet into its programme, which with Wi-Fi 6, two radio frequencies (dual band 2.4 GHz, 5 GHz), a wide temperature range from -40 to +75 °C and five LAN interfaces in a stable metal casing is designated for professional use.