- **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously at up to **800 kS/s per channel**, ensuring phase‑accurate acquisition across multiple signals. - **High Resolution:** 16‑bit analog‑to‑digital conversion with no missing codes for precise signal representation. - **Flexible Input Ranges:** Programmable bipolar ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V and unipolar ranges of 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Dual Analog Outputs:** Two 12‑bit voltage outputs (0–10 V, ±10 V, or external reference) with 1 MS/s update rate and waveform generation capability. - **Digital I/O:** 24 programmable TTL/CMOS‑compatible digital I/O lines (8255 PIO compatible). - **Timer/Counter:** Two 16‑bit up/down general‑purpose counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers with multiple trigger modes: pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger. - **Auto‑Calibration:** On‑board precision 5.000 V reference with ±2 ppm/°C drift and 6 ppm/1000 h stability; automatic gain and offset calibration eliminates manual trimpot adjustment. - **High Noise Immunity:** Piggy‑back analog/digital board design and dedicated DC/DC regulation minimize digital noise coupling. - **Bus‑Mastering DMA with Scatter‑Gather:** High‑speed data transfer directly to system memory without CPU overhead, supporting fragmented memory blocks. - **Multiple‑Card Synchronization:** SSI bus allows synchronization of up to four cards for expanded channel counts and coherent sampling. - **Software Support:** Compatible with ADLINK D2K‑DASK (Windows), D2K‑DASK/X (Linux), LabVIEW® (D2K‑LVIEW), and ActiveX (D2K‑OCX) drivers.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **High-Speed Analog Input:** Four simultaneous analog input channels capable of sampling at up to 10 MS/s with 12-bit resolution, ensuring accurate and synchronized data acquisition across multiple channels. - **Flexible Input Ranges:** Supports both bipolar (±5 V, ±10 V) and unipolar (0–5 V, 0–10 V) voltage ranges, allowing adaptation to a wide variety of signal sources. - **Large Onboard Memory:** Equipped with a 16 M-sample data FIFO or ring buffer, enabling continuous high-speed data capture without data loss. - **Digital I/O Integration:** Includes 4 digital input (DI) and 4 digital output (DO) channels using LVTTL logic levels, suitable for control, triggering, or synchronization tasks. - **Counter Functionality:** Built-in counter with selectable internal 4 MHz clock or external signal input, supporting event counting, frequency measurement, or timing applications. - **PCI Express Interface:** High-bandwidth PCIe bus interface ensures fast data transfer between the card and host system, minimizing latency and maximizing throughput. - **Comprehensive Software Support:** Compatible with Windows and Linux operating systems, with driver packages and APIs for C/C++, C-LOGGER, and LabVIEW environments. - **Compact and Lightweight Design:** Measuring approximately 169.33 mm × 110.18 mm and weighing around 150 g, the card fits standard PCIe slots without requiring additional power connectors. - **Industrial-Grade Reliability:** Designed for operation in environments ranging from 0 °C to 50 °C and 10–90 % relative humidity (non-condensing).

Manufacturer: Contec

Category: A/D High Speed PCI

- **PCI Express Specification Compliance:** PCI Express Rev. 1.1, Gen 1 x4 interface - **High‑Resolution ADC:** 24‑bit delta‑sigma analog‑to‑digital converters for superior accuracy - **Simultaneous Sampling:** Eight channels sampled concurrently for phase‑coherent measurements - **Sampling Rate:** Up to 192 kS/s per channel, adjustable in fine increments - **Input Range:** Software‑selectable ±10 V or ±1 V - **Input Coupling:** AC or DC, software‑selectable; AC coupling cutoff frequency 0.5 Hz - **IEPE Sensor Support:** 4 mA excitation current per channel, 24 V compliance for accelerometers and microphones - **Auto‑Calibration:** Onboard reference circuit with EEPROM‑stored calibration constants - **Triggering Options:** Software, external digital, analog, and SSI (System Synchronization Interface) triggers - **Synchronization:** Multi‑module synchronization via SSI bus for timebase and trigger sharing - **Data Transfer:** Scatter‑gather DMA for high‑speed, continuous data streaming - **Onboard Memory:** 512 MB shared buffer for data acquisition - **Software Compatibility:** LabVIEW®, MATLAB®, Visual Studio®, and ADLINK DSA‑DASK SDK - **Operating Systems:** Windows XP/7/8 (x86/x64) - **Certifications:** CE, FCC Class A, RoHS, and WEEE compliant

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PCIe

- **PCI Express x1 Interface:** Fully compliant with PCIe x1 lane, supporting both 3.3 V and 5 V signaling environments. - **High‑Resolution Analog Input:** 16‑bit A/D converter with no missing codes, supporting 16 single‑ended or 8 differential channels. - **Sampling Rate:** Up to 250 kS/s aggregate throughput. - **Programmable Input Ranges:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V and unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Programmable Gain:** x1, x2, x4, x8 with per‑channel configuration via a 512‑entry channel gain queue. - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **Triggering:** Supports software, external analog, external digital, and SSI triggers with multiple trigger modes (pre‑, post‑, middle‑, delay‑trigger). - **FIFO Buffers:** 1 k‑sample A/D FIFO for efficient data buffering. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O (8255 PIO). - **Timers/Counters:** Two 16‑bit general‑purpose up/down counters with 40 MHz base clock and external clock up to 10 MHz. - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather capability for efficient data transfer. - **System Synchronization Interface (SSI):** Enables multi‑card synchronization for simultaneous sampling. - **Software Support:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data logging and configuration. - **Plug‑and‑Play Configuration:** No jumpers required; automatic resource allocation.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **PCI Express x1 Interface:** Fully compliant with 3.3 V and 5 V PCIe bus signaling; plug‑and‑play configuration. - **High‑Resolution Analog Input:** 16‑bit resolution, no missing codes, up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 16 single‑ended or 8 differential analog input channels, software‑selectable per channel. - **Programmable Gain and Range:** Gains of ×1, ×2, ×4, ×8; bipolar ranges (±10 V, ±5 V, ±2.5 V, ±1.25 V) and unipolar ranges (0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V). - **Auto‑Calibration:** Fully automatic calibration for both A/D and D/A circuits using onboard 5 V reference (±2 ppm/°C). - **Analog Output:** Two 12‑bit multiplying DACs with waveform generation capability, 1 MS/s update rate, ±10 V or 0–10 V output range. - **Digital I/O:** 24‑channel programmable TTL I/O via 8255 PIO interface. - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz base clock and external clock up to 10 MHz. - **Triggering:** Supports software, external analog, and digital triggers; pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger modes. - **DMA Support:** Scatter‑gather bus‑mastering DMA for high‑speed data transfer with minimal CPU load. - **FIFO Buffers:** 1 k‑sample A/D FIFO and 1 k‑sample D/A FIFO for continuous streaming. - **Synchronization:** System Synchronization Interface (SSI) for multi‑card synchronization. - **Software Support:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data logging and configuration. - **Compact Form Factor:** 168 mm × 107 mm PCB with dual 68‑pin VHDCI connectors.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **PCI Express x1 Interface:** High‑speed, plug‑and‑play PCIe connectivity for modern PC platforms. - **High‑Resolution Analog Input:** 64 single‑ended or 32 differential channels, 16‑bit resolution, up to 250 kS/s sampling rate. - **Flexible Input Ranges:** Bipolar ±10 V to ±1.25 V and unipolar 0–10 V to 0–1.25 V ranges, software‑selectable per channel. - **Programmable Gain:** x1, x2, x4, x8 gain settings for optimized signal scaling. - **Dual Analog Outputs:** Two 12‑bit voltage outputs (0–10 V or ±10 V) with 1 MS/s update rate and 20 V/µs slew rate. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O via Intel 8255 PIO architecture. - **Timer/Counter:** Two independent 16‑bit general‑purpose counters with 40 MHz base clock and external clock input up to 10 MHz. - **Triggering:** Supports software, external analog/digital, and SSI (System Synchronization Interface) triggers with multiple trigger modes (pre‑, post‑, middle‑, delay‑trigger). - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k‑sample A/D FIFO and 1 k‑sample D/A FIFO for continuous data streaming. - **Scatter‑Gather DMA:** Efficient high‑speed data transfer with minimal CPU overhead. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Software Support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** AD‑Logger for data logging and monitoring.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **High‑Speed Analog Input:** 64 single‑ended or 32 differential analog input channels with 12‑bit resolution and up to 3 MS/s sampling rate. Supports mixed‑mode channel configuration (SE/DI selectable per channel). - **Analog Output:** Two 12‑bit analog output channels with ±10 V or 0–10 V ranges, 1 MS/s update rate, and 1 k‑sample FIFO per channel. - **Digital I/O:** 24‑channel TTL‑compatible programmable digital I/O (8255 PIO). - **Counter/Timer:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, and digital triggers, as well as synchronization via SSI (System Synchronization Interface) bus. - **Auto‑Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **High Bandwidth and Accuracy:** 2 MHz small‑signal bandwidth, 1 µs settling time to 0.1% error, ±0.06% FSR gain error, ±2 mV offset error. - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather capability for efficient data transfer. - **Synchronization:** Multi‑card synchronization through SSI or PXI trigger bus. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD‑Logger for data logging and monitoring.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **PCI Express Interface:** x1 lane PCIe interface for high‑speed data throughput and plug‑and‑play configuration. - **High Channel Density:** 96 single‑ended (SE) or 48 differential (DI) analog input channels; mixed‑mode operation supported. - **High Sampling Rate:** Up to 3 MS/s maximum sampling rate (single‑channel). - **12‑bit Resolution:** No missing codes; precise A/D conversion for accurate signal representation. - **Programmable Gain:** 10 selectable gains (×1, ×2, ×4, ×5, ×8, ×10, ×20, ×40, ×50, ×200). - **Wide Input Range:** Bipolar ranges from ±0.05 V to ±10 V; unipolar ranges from 0–0.1 V to 0–10 V. - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **FIFO Buffer:** 1 k‑sample A/D FIFO for continuous high‑speed acquisition. - **Triggering:** Software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - **Trigger Modes:** Pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger. - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather support for efficient data transfer. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O (8255 PIO). - **Synchronization:** Multi‑card synchronization via SSI or PXI trigger bus. - **Software Support:** Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data logging and monitoring. - **Compact Design:** 168 mm × 107 mm PCB with dual 68‑pin VHDCI connectors.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **PCI Express Interface:** x1 lane PCIe bus for high‑speed data throughput and plug‑and‑play configuration. - **Analog Input Channels:** 64 single‑ended (SE) or 32 differential (DI) channels, software‑selectable per channel. - **Resolution and Sampling:** 16‑bit resolution, maximum sampling rate of 500 kS/s. - **Analog Input Ranges:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V; unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Programmable Gain:** x1, x2, x4, x8. - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k‑sample A/D FIFO and 1 k‑sample D/A FIFO for efficient data streaming. - **Analog Output:** Two 12‑bit voltage output channels (0–10 V or ±10 V) with 1 MS/s update rate. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O (8255 PIO). - **Timer/Counter:** Two 16‑bit general‑purpose counters with 40 MHz base clock. - **Triggering:** Supports software, external analog, and digital triggers; pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger modes. - **Synchronization:** Multi‑card synchronization via SSI (System Synchronization Interface) or PXI trigger bus. - **Software Support:** Drivers for Windows and Linux; SDKs for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Operating Systems:** Windows 7/8 x86/x64, Linux kernels 2.4.x and later. - **Form Factor:** PCIe half‑length card, 175 mm × 107 mm. - **Connectors:** Two 68‑pin VHDCI female connectors for analog/digital I/O and timing signals.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCIe

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high‑speed data transfer and broad system compatibility. - **Four Independent RS‑232 Ports:** Provides four serial communication channels via a single DB44 female connector, expandable through a breakout cable. - **Wide Baud Rate Range:** Supports baud rates from **150 bps to 921.6 Kbps**, suitable for a wide range of serial devices. - **128‑Byte FIFO Buffer:** Each port includes a 128‑byte FIFO buffer for efficient data handling and reduced CPU load. - **Hardware and Software Flow Control:** Supports RTS/CTS (hardware) and Xon/Xoff (software) flow control for reliable data transmission. - **Full Modem Control Signals:** Includes TxD, RxD, RTS, CTS, DTR, DSR, DCD, and GND signals for full RS‑232 compliance. - **Low‑Profile Design:** Compact 67.2 × 104.8 mm form factor suitable for small‑form‑factor PCs and embedded systems. - **Industrial Temperature Range:** Operates reliably from **‑40°C to +75°C**, with storage capability up to +85°C. - **High ESD Protection:** Meets IEC 61000‑4‑2 standards with **15 kV air discharge** and **8 kV contact discharge** protection. - **LED Indicators:** Each port features dual LEDs—green for transmit (TX) and amber for receive (RX)—for real‑time communication status monitoring. - **Low Power Consumption:** Operates at **835 mA @ 3.3 VDC**, requiring only the PCIe slot power supply. - **Rugged Industrial Design:** Built for long‑term reliability in harsh environments, with 5‑year warranty coverage.

Manufacturer: JS Automation

Category: RS232 4-Ports

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 slots, ensuring broad compatibility with modern industrial PCs and servers. - **Multi‑Protocol Serial Support:** Each of the four ports can be configured for RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire) operation, providing maximum flexibility for connecting diverse serial devices. - **High Baud Rate Range:** Supports data rates from 50 bps up to 921.6 Kbps, suitable for both legacy and high‑speed serial communications. - **128‑Byte FIFO Buffer:** Each port includes a 128‑byte FIFO for efficient data handling and reduced CPU overhead. - **Flow Control Options:** Supports both hardware (RTS/CTS) and software (Xon/Xoff) flow control mechanisms. - **Low‑Profile Design:** Compact 67.2 × 104.8 mm form factor suitable for small‑form‑factor PCs and embedded systems. - **Industrial‑Grade Reliability:** Operating temperature range of ‑40 °C to +75 °C and humidity tolerance of 5 %–95 % non‑condensing. - **Surge and ESD Protection:** - Standard model: ESD protection up to 15 kV (air) / 8 kV (contact). - “‑S” model: Additional 6 kV signal surge protection per IEC 61000‑4‑5. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Power Efficiency:** Operates from 3.3 V DC with a typical current draw of 835 mA. - **Comprehensive Modem Control Signals:** Full RS‑232 modem control lines (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND) ensure compatibility with a wide range of serial peripherals. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: JS Automation

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Dual Isolated Serial Ports:** Provides two independent serial communication channels configurable as RS‑232, RS‑422, or RS‑485 interfaces. - **High Electrical Isolation:** 3 kV isolation between ports and system bus ensures protection against ground loops, surges, and electrical noise. - **Enhanced ESD Protection:** Built‑in electrostatic discharge protection rated at 15 kV (air discharge) and 8 kV (contact discharge) for reliable operation in electrically noisy environments. - **Low‑Profile PCIe Form Factor:** Compact design suitable for small form factor PCs, embedded systems, and industrial computers with limited expansion space. - **High Data Throughput:** Supports baud rates up to 921.6 kbit/s, enabling fast and stable data transmission for demanding serial applications. - **Large FIFO Buffer:** 128‑byte FIFO per port for efficient data handling and reduced CPU overhead during high‑speed communication. - **Single Power Requirement:** Operates solely from the PCIe 3.3 V DC power rail, simplifying system power design and reducing energy consumption. - **Wide Operating Temperature Range:** Designed for industrial environments with an extended temperature range from ‑40 °C to +75 °C. - **Universal Compatibility:** Fully compliant with PCI Express specifications, ensuring compatibility with a wide range of operating systems and hardware platforms. - **Durable Industrial Design:** Built with high‑quality components and robust PCB layout to ensure long‑term reliability and signal integrity.

Manufacturer: Rayon

Category: RS232 2-Ports PCI

- **PCI Express x1 Interface:** Fully compliant with PCI Express x1 specification, ensuring compatibility with modern PC and industrial computer platforms. - **Four Isolated RS‑232 Ports:** Provides four independent RS‑232 serial channels through a single DB44 connector, each isolated to 3 kV for enhanced protection against ground loops and electrical surges. - **High Baud Rate Support:** Configurable baud rates from 150 bps up to 921.6 Kbps, suitable for a wide range of serial communication devices. - **128‑Byte FIFO Buffer:** Each port includes a 128‑byte FIFO for efficient data handling and reduced CPU overhead during high‑speed communication. - **Hardware and Software Flow Control:** Supports RTS/CTS (hardware) and Xon/Xoff (software) flow control for reliable data transmission. - **Low‑Profile Form Factor:** Compact 67.2 × 136.8 mm design fits small‑form‑factor PCs and embedded systems. - **3 kV Isolation Protection:** Electrical isolation between ports and host system enhances safety and prevents damage from transient voltages. - **LED Indicators:** Individual TX (green) and RX (amber) LEDs per port provide real‑time transmission and reception status. - **Wide Temperature Range:** Operates reliably from ‑40 °C to +75 °C, suitable for harsh industrial environments. - **High ESD Immunity:** Meets IEC 61000‑4‑2 standards with 15 kV air and 8 kV contact discharge protection. - **Energy Efficient:** Operates on 3.3 V DC with a typical current draw of 1,150 mA. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: JS Automation

Category: RS232 4-Ports

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring broad compatibility with modern industrial PCs and embedded systems. - **Multi‑Protocol Serial Support:** Provides four independent serial ports configurable for RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire) operation. - **High Isolation Protection:** 3 kV galvanic isolation between ports and system bus to protect against ground loops and electrical surges. - **Enhanced ESD Protection:** IEC 61000‑4‑2 compliant with 15 kV air and 8 kV contact discharge protection. - **Wide Baud Rate Range:** Supports baud rates from 50 bps to 921.6 Kbps, suitable for a wide range of serial devices. - **128‑Byte FIFO Buffer:** Reduces CPU overhead and ensures stable data transmission at high speeds. - **Flow Control Options:** Supports both hardware (RTS/CTS) and software (Xon/Xoff) flow control for flexible communication management. - **Low‑Profile Design:** Compact 67.2 × 136.8 mm PCB suitable for small‑form‑factor PCs and embedded systems. - **LED Indicators:** Individual TX (green) and RX (amber) LEDs for each port provide clear visual status of data transmission and reception. - **Industrial Temperature Range:** Operates reliably from ‑40 °C to +75 °C, with storage capability up to +85 °C. - **Power Efficiency:** Operates on 3.3 V DC with a typical current draw of 1,150 mA. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: JS Automation

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high-speed data transfer and broad system compatibility. - **Four RS-232 Ports:** Provides four independent RS-232 serial communication channels via a single DB44 connector. - **High Surge and ESD Protection:** - Surge protection up to 6 kV (signal lines, –S model only). - ESD protection: 15 kV (air discharge), 8 kV (contact discharge). - **Wide Baud Rate Range:** Supports baud rates from 150 bps to 921.6 Kbps, suitable for a wide variety of serial devices. - **128-Byte FIFO Buffer:** Ensures smooth data transmission and reception with minimal CPU overhead. - **Flow Control Support:** Hardware (RTS/CTS) and software (Xon/Xoff) flow control supported for reliable communication. - **Low Profile Design:** Compact form factor (67.2 x 104.8 mm) suitable for small form factor PCs and embedded systems. - **Full Modem Control Signals:** Provides DCD, DSR, DTR, RTS, CTS, and DCD signals for full modem compatibility. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with extended temperature and humidity tolerance. - **Power Efficiency:** Operates on 3.3 VDC with a current draw of 835 mA. - **Long-Term Warranty:** Backed by a 5-year manufacturer warranty.

Manufacturer: Rayon

Category: RS232 4-Ports

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 slots, supporting plug‑and‑play installation in modern PCs and industrial computers. - **Multi‑Protocol Serial Support:** Each of the four ports can be configured for RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire) communication modes. - **High Surge and ESD Protection:** - Surge protection up to **6 kV** (signal lines, –S model only). - ESD protection up to **15 kV air discharge** and **8 kV contact discharge**. - **Wide Baud Rate Range:** Supports serial communication speeds from **50 bps to 921.6 kbps**, suitable for both legacy and high‑speed serial devices. - **128‑Byte FIFO Buffer:** Reduces CPU overhead and ensures stable data transmission under heavy load. - **Hardware and Software Flow Control:** Supports RTS/CTS and Xon/Xoff flow control mechanisms for reliable data exchange. - **Low‑Profile Design:** Compact PCB (67.2 × 104.8 mm) suitable for small‑form‑factor PCs and embedded systems. - **LED Indicators:** - **TX (Green):** Indicates data transmission. - **RX (Amber):** Indicates data reception. - **Industrial Temperature Range:** Operates reliably from **–40 °C to +75 °C**, with storage capability up to +85 °C. - **Power Efficiency:** Operates on **3.3 V DC**, consuming approximately **835 mA**. - **Comprehensive Modem Control Signals:** Full RS‑232 signal set (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND) for compatibility with a wide range of serial peripherals. - **Extended Warranty:** Backed by a **5‑year manufacturer warranty**.

Manufacturer: Rayon

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high‑speed data transfer and broad system compatibility. - **Four RS‑232 Serial Ports:** Provides four independent RS‑232 communication channels via a single DB44 connector. - **High Isolation and Surge Protection:** - 3 kV serial isolation between ports and system bus. - 6 kV surge protection on signal lines (specific to the “‑SI” model). - **Wide Baud Rate Range:** Supports baud rates from 150 bps up to 921.6 Kbps, accommodating a wide range of serial devices. - **128‑Byte FIFO Buffer:** Large FIFO buffer per port for efficient data handling and reduced CPU load. - **Flow Control Support:** Hardware (RTS/CTS) and software (Xon/Xoff) flow control for reliable data transmission. - **Low‑Profile Design:** Compact PCB (67.2 × 136.8 mm) suitable for small‑form‑factor PCs and embedded systems. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Industrial‑Grade Protection:** - ESD protection: 15 kV (air), 8 kV (contact). - Surge protection: 6 kV (signal lines, SI model). - Isolation: 3 kV between serial ports and host system. - **Wide Operating Temperature:** ‑40 °C to +75 °C for reliable operation in extreme environments. - **Power Efficiency:** Operates from 3.3 V DC with a typical current draw of 1,150 mA. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Rayon

Category: RS232 4-Ports

- **PCI Express x1 Compliant:** Fully compatible with PCI Express x1 interface, ensuring high‑speed data transfer and broad system compatibility. - **Multi‑Protocol Serial Support:** Provides four independent serial ports configurable for RS‑232, RS‑422, or RS‑485 (2‑wire or 4‑wire) operation. - **High Electrical Protection:** - 3 kV isolation between ports and system bus. - 6 kV surge protection on signal lines (‑SI models). - ESD protection: 15 kV (air) / 8 kV (contact). - **Wide Baud Rate Range:** Supports baud rates from 50 bps to 921.6 kbps, suitable for a wide range of industrial serial devices. - **128‑Byte FIFO Buffer:** Ensures stable and efficient data transmission with minimal CPU load. - **Flow Control Options:** Hardware (RTS/CTS) and software (Xon/Xoff) flow control supported. - **Low‑Profile Form Factor:** Compact 67.2 × 136.8 mm design ideal for small‑form‑factor PCs and embedded systems. - **LED Indicators:** - Green LED for TX (transmit activity). - Amber LED for RX (receive activity). - **Rugged Industrial Design:** Wide operating temperature range (‑40 °C to +75 °C) and humidity tolerance (5 %–95 % non‑condensing). - **Power Efficiency:** Operates on 3.3 V DC, consuming approximately 1,150 mA. - **Comprehensive Certification:** Meets EMC, EMI, and EMS standards for industrial environments. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Rayon

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **High‑speed analog output:** 4 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 8 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Fully auto‑calibrating architecture:** Internal 14‑bit calibration DAC with ±2 ppm/°C reference stability. - **Programmable voltage ranges:** Bipolar ±10 V or unipolar 0–10 V, with optional external reference per channel. - **Hardware‑based arbitrary waveform generation:** Onboard 8 k‑sample D/A FIFO buffer for continuous or iterative waveform output. - **Scatter‑gather DMA:** High‑throughput, low‑CPU‑load data transfer for both A/D and D/A operations. - **Digital I/O:** 24 TTL‑compatible programmable lines (Intel 8255 PIO compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers; supports post‑trigger, delay‑trigger, and retrigger modes. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Auto‑calibration:** Internal precision 5 V reference, ±2 ppm/°C, with software‑controlled calibration constants stored in EEPROM. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Utility software:** AD‑Logger for data logging and configuration. - **Plug‑and‑play PCI Express interface:** Automatic resource configuration, no jumpers required. - **Environmental robustness:** 0 °C – 55 °C operating range, 5 – 95 % RH non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PCIe

- **High‑speed analog output:** 8 channels, 12‑bit resolution, up to 1 MS/s simultaneous update rate. - **Analog input capability:** 4 single‑ended channels, 14‑bit resolution, up to 400 kS/s sampling rate. - **Dual‑function operation:** Supports both waveform generation and signal acquisition on the same board. - **Auto‑calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Flexible voltage ranges:** Bipolar ±10 V or unipolar 0–10 V ranges; external reference up to ±10 V per channel. - **Large onboard buffers:** 16 k‑sample D/A FIFO and 2 k‑sample A/D FIFO for continuous streaming. - **Scatter‑gather DMA:** Hardware bus‑mastering DMA for high‑throughput, low‑CPU‑load data transfer. - **Digital I/O:** 24 TTL/CMOS‑compatible programmable lines (Intel 8255 PIO‑compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or 10 MHz external clock. - **Triggering:** Software, external digital, external analog, or SSI (System Synchronization Interface) triggers. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Software ecosystem:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux; supports LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio .NET. - **Utility software:** AD‑Logger for data logging and visualization. - **Plug‑and‑play PCIe:** Automatic resource configuration, no jumpers required. - **Comprehensive protection:** ±30 V overvoltage protection on analog inputs, short‑circuit protection on outputs. - **Compact design:** 168 × 107 mm PCIe card with 68‑pin VHDCI connector.

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PCIe

**Digital I/O Capabilities** - 48-channel TTL/DTL-compatible digital I/O lines. - Emulates two industry-standard Intel 8255 Programmable Peripheral Interface (PPI) chips operating in Mode 0. - Buffered circuits for enhanced driving capability and signal integrity. - Direct interface with OPTO-22-compatible I/O modules for industrial-grade isolation and signal conditioning. - Output status read-back capability for verification and monitoring. **Timer/Counter and Interrupt System** - Integrated 8254 programmable timer/counter chip with three 16-bit counters. - 32-bit cascaded timer for watchdog or periodic interrupt generation. - 16-bit event counter for external event counting or frequency measurement. - Programmable interrupt source selection with dual interrupt architecture (INT1 and INT2). - Supports event-triggered and timer-triggered interrupts. **Power and Protection** - Provides +12V and +5V auxiliary power outputs on OPTO-22 connectors. - Resettable fuses protect external devices from overcurrent or short-circuit conditions. - Onboard watchdog timer and event counter for system reliability. **Software and Driver Support** - Comprehensive driver support for Windows and Linux platforms. - Compatible with ADLINK’s PCIS-DASK, PCIS-DASK/X, and PCIS-LVIEW software libraries. - Supports programming in C/C++, Visual Basic, Delphi, and LabVIEW environments. - Includes ActiveX and OPC server support for SCADA and HMI integration. **Plug-and-Play Configuration** - Fully compliant with PCI Express Plug-and-Play specifications. - Automatic resource allocation for I/O addresses and interrupts by system BIOS. - No manual jumper or DIP switch configuration required.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PCIe

- **High-Density Digital I/O:** 96-channel TTL/DTL-compatible digital input/output lines, organized as four 24-bit ports (A, B, C per connector). - **8255 PPI Emulation:** Emulates four industry-standard Intel 8255 Programmable Peripheral Interface chips operating in Mode 0 configuration. - **Opto-22 Compatibility:** Direct interface with OPTO-22-compatible I/O modules for industrial control and signal isolation. - **Buffered I/O Circuits:** Buffered input/output circuitry ensures higher drive capability and signal integrity. - **Dual Interrupt System:** Supports two simultaneous interrupt sources (INT1 and INT2) with programmable trigger conditions and multiplexed interrupt control. - **Integrated Timer/Counter:** Includes one 8254 programmable timer/counter chip providing: - 32-bit cascaded timer for watchdog or periodic interrupts - 16-bit event counter for external event counting - Programmable interrupt generation - **Power Distribution:** Provides +5V and +12V power outputs on OPTO-22 connectors with resettable fuses for external device protection. - **Plug-and-Play PCI Express Interface:** Fully compliant with PCI Express x1 bus standard; automatic resource allocation (I/O address and IRQ) via BIOS. - **Software Support:** Comprehensive driver and library support for Windows and Linux, including PCIS-DASK, LabVIEW™, MATLAB®, and ActiveX/DAQBench™. - **Industrial-Grade Design:** Operating temperature range 0°C to 60°C, humidity 5–95% non-condensing, suitable for industrial automation environments.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PCIe

- **High-Speed PCI Express Interface:** PCIe x1 lane interface providing up to 80 MB/s sustained data transfer rate via bus mastering DMA. - **Flexible Channel Configuration:** 32 channels of 5 V TTL-compatible digital I/O, configurable as 16 inputs and 16 outputs, or as 32 inputs or 32 outputs. - **High Throughput:** - Up to 80 MB/s sustained transfer rate (32-bit @ 20 MHz). - Up to 160 MB/s burst rate for digital input using external 40 MHz clock. - **Large Onboard FIFO Buffers:** 64 KB total FIFO memory (32 KB for input, 32 KB for output) for high-speed buffered data transfer. - **Advanced DMA Support:** Bus mastering DMA with scatter-gather capability for efficient, non-contiguous memory transfers and ring-buffer operation. - **Programmable Timing and Triggering:** - Onboard 8254 programmable timer/counter with 10 MHz base clock. - Independent DI_TRG and DO_TRG trigger signals for acquisition and pattern generation. - Internal or external clocking up to 40 MHz. - **Auxiliary I/O:** 4 auxiliary digital inputs and 4 auxiliary digital outputs for control or status signaling. - **Active Termination:** Software-selectable active terminators for reliable high-speed and long-distance data transmission. - **Software and OS Support:** - Windows 7/Vista/XP/2000/2003 Server - Linux (PCIS-DASK/X) - Supported APIs: DAQPilot for LabVIEW™, PCIS-DASK, DAQBench, and AD-Logger. - Programming languages: VB.NET, VC.NET, C/C++, Delphi, Borland C++ Builder. - **Plug and Play Configuration:** Fully compliant with PCI Plug and Play standards; no jumpers or DIP switches required.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PCIe

- **High-Speed PCI Express Interface:** Utilizes a PCI Express x4 lane interface providing up to 400 MB/s throughput. - **Flexible Channel Configuration:** 32 bi-directional digital I/O channels divided into four 8-bit groups, each configurable as input or output. - **Selectable Logic Levels:** Software-selectable voltage levels of 1.8 V, 2.5 V, or 3.3 V (5 V compatible) for all I/O lines. - **High Clock Rates:** - Internal clock up to 100 MHz - External clock up to 200 MHz (DI mode, 8/16-bit width) - **Phase Shift Control:** 80-step phase shifting (4.5° per step) for precise timing alignment in external clock mode. - **Integrated Serial Interfaces:** Built-in I²C and SPI master interfaces for direct communication with peripheral devices. - **DMA and FIFO Architecture:** Scatter-gather bus-mastering DMA with 8K-sample DI FIFO and 20K-sample DO FIFO ensures continuous high-speed data transfer without CPU overhead. - **Trigger and Handshake Support:** Multiple trigger modes (post, gated, re-trigger) and handshake protocols for synchronized data exchange. - **Auxiliary Function I/O (AFI):** Eight programmable AFI lines supporting static I/O, triggers, handshake, and clock I/O. - **Software Compatibility:** Supports Windows XP/7/8 (x86/x64) and Linux; compatible with LabVIEW®, MATLAB®, and Visual Studio .NET.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PCIe

- **High‑Speed PCI Express® Interface:** - x1 lane PCI Express® interface delivering up to **200 MB/s** maximum throughput. - Bus‑mastering DMA with scatter‑gather support for efficient, CPU‑independent data transfer. - **Flexible Clocking Architecture:** - Internal clock up to **50 MHz** (programmable divider 100 MHz/N, 2 ≤ N ≤ 65,535). - External clock up to **100 MHz** (supports 8/16‑bit data width). - **16‑step phase shift** (22.5° increments) for precise timing alignment. - **Programmable Logic Levels:** - Software‑selectable logic levels: **1.8 V**, **2.5 V**, or **3.3 V** (5 V compatible). - Uniform logic level applied across all I/O groups. - **Configurable I/O Direction:** - 32 bi‑directional channels divided into four 8‑bit groups (A–D). - Each group independently configurable as input or output. - **Advanced Triggering and Handshaking:** - Supports **software**, **external digital**, **pattern match**, **post/re‑trigger**, and **gated** trigger modes. - Flexible handshaking (DI‑REQ/DI‑ACK, DO‑REQ/DO‑ACK) and burst handshaking for reliable data exchange. - **Auxiliary Function I/O (AFI):** - 8 programmable AFI channels configurable for I²C, SPI, trigger, event, or clock I/O. - I²C master (up to 244 kHz) and SPI master (up to 62.5 MHz) support. - **High‑Speed Data Integrity:** - 8 K‑sample FIFO buffers for both input and output. - Scatter‑gather DMA ensures continuous, loss‑free data streaming. - **Software and OS Support:** - Compatible with Windows 2000/XP/Vista/2003. - Supported programming environments: VB.NET, VC.NET, Delphi, BCB, DAQBench. - Driver package: **PCIS‑DASK** for Windows.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PCIe