- **High‑Precision Analog Input:** 16 isolated single‑ended analog input channels with 16‑bit resolution and ±10 V bipolar input range. Absolute maximum input voltage: ±20 V. - **Bus Isolation:** Digital isolator provides galvanic isolation between the PC bus and external I/O circuits, improving noise tolerance and protecting the host system. - **High Sampling Rate:** 100 kS/s (10 µs per channel) maximum conversion speed. - **Integrated Digital I/O:** Four isolated TTL‑level digital inputs and four isolated TTL‑level digital outputs (positive logic). - **Built‑in Counter Function:** One 32‑bit up‑count channel with 1 MHz maximum count frequency, isolated TTL‑level gate and up inputs, and count‑match pulse output. - **Buffer Memory:** 1 k‑word buffer for analog input data, enabling background acquisition independent of host CPU load. - **Software‑Based Calibration:** Full analog calibration performed via software; user‑defined calibration data can be stored in addition to factory calibration. - **Flexible Triggering and Clocking:** Supports software, external trigger, and external clock operation. Rising/falling edge selection and 1 µs digital filter configurable by software. - **Compact Low Profile Design:** 121.69 mm (L) × 63.41 mm (H), 65 g. Supplied with both Low Profile and standard brackets. - **Comprehensive Software Support:** Includes Windows and Linux drivers, C‑LOGGER data logger, and libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Noise‑Resistant and Cost‑Effective:** Designed for industrial and laboratory environments requiring high accuracy and isolation at low cost.

Manufacturer: Contec

Category: A/D Isolated PCI

- **PCI Local Bus Specification Compliance:** Fully compliant with PCI Local Bus Specification Revision 2.2 and PCI‑to‑PCI Bridge Architecture Specification Revision 1.2. - **Full Bandwidth Extension:** Supports 32‑bit/33 MHz PCI operation, delivering up to 132 MB/s throughput. - **StarFabric Serial Link Technology:** Employs a 5 Gbps serial link (4 × 622 Mbps LVDS pairs) for high‑integrity, low‑latency data transmission. - **Hardware/Software Transparency:** Appears to the host system as a local PCI bus; no additional drivers or software required. - **Robust Connectivity:** Utilizes a 24‑pin DVI‑D connector and shielded twisted‑pair copper cabling for reliable signal quality. - **Extended Distance:** Supports cable lengths up to 10 m between host and extension chassis. - **Multi‑Chassis and Star Topology Support:** Enables multi‑chassis configurations and star‑fabric architectures for scalable PCI expansion. - **Industrial‑Grade Design:** Suitable for industrial automation, test and measurement, aerospace, and video capture applications. - **Power Efficiency:** Low power consumption (+5 V @ 190 mA, +3.3 V @ 250 mA). - **Operating Environment:** 0 °C – 50 °C operating range, 10 – 90 % RH non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **High‑Precision Analog Input:** 64 single‑ended or 32 differential channels, 16‑bit resolution, ±10 V bipolar input range, 10 µs conversion per channel (100 kS/s aggregate rate). - **Flexible Sampling Control:** Sampling start/stop can be triggered by software, external triggers, or comparison of conversion data. Supports internal or external sampling clocks. - **Buffered Data Acquisition:** On‑board 1 k‑word buffer memory configurable as FIFO or ring buffer for continuous background sampling independent of host CPU load. - **Digital I/O and Counter:** 4 LVTTL‑level digital inputs and 4 LVTTL‑level digital outputs (positive logic), plus one 32‑bit up‑counter channel (10 MHz max). - **Digital Filtering:** Built‑in digital filter (1 µs selectable) suppresses chattering and noise on external trigger, sampling clock, digital input, and counter signals. - **Software‑Based Calibration:** Full analog input calibration via software; user can store additional calibration data for environmental adjustments. - **Driver and Software Support:** Includes CONTEC API‑PAC(W32) driver libraries for Windows and Linux, C‑LOGGER data‑logger software, and optional MATLAB ML‑DAQ and LabVIEW VI‑DAQ libraries. - **Compatibility:** Functionally and connector‑pin compatible with legacy PCI board AD16‑64(LPCI)LA, simplifying system migration. - **Dual Bracket Support:** Supplied with both low‑profile and standard PCI brackets for flexible installation. - **Regulatory Compliance:** RoHS and VCCI certified.

Manufacturer: Contec

Category: A/D High Resolution PCIe

- **Full IEEE-488.1 and IEEE-488.2 Compliance:** Ensures interoperability with a wide range of GPIB instruments and systems. - **PCI Express 1.1 Interface:** Provides high-speed, low-latency communication with host systems. - **High Data Transfer Rate:** Supports up to 1.2 MB/s GPIB data transfer rate for the LPCIe-3488A model. - **Onboard FIFO Buffer:** 2 kB FIFO memory for efficient read/write operations and reduced CPU overhead. - **Software Compatibility:** Fully compatible with National Instruments NI-488.2 driver APIs and VISA library, ensuring seamless integration with existing applications. - **Plug-and-Play Configuration:** Automatic resource allocation via PCIe bus; no manual jumper or switch settings required. - **Interactive Diagnostic Utility:** ADLINK GPIB Utility software for testing, configuration, and troubleshooting. - **Wide Software Support:** Compatible with Visual Studio .NET, Borland C++ Builder, LabVIEW™, MATLAB®, and Delphi environments. - **Low-Profile Form Factor:** Compact design suitable for industrial and desktop PCs with limited space. - **Environmental Compliance:** RoHS and WEEE compliant, reflecting ADLINK’s commitment to environmental responsibility. - **EMC/EMI Certification:** CE and FCC Class A certified for electromagnetic compatibility.

Manufacturer: Adlink Technology Inc.

Category: IEEE (GPIB) Cards

- **IEEE‑488.1/488.2 Compliance:** Fully compatible with both hardware and software GPIB standards. - **High Data Throughput:** Supports data transfer rates up to **1.5 MB/s** in programmed I/O mode. - **Low‑Profile PCI Form Factor:** MD1‑compliant PCB (120 mm × 64 mm) suitable for compact industrial and desktop systems. - **Dual Voltage PCI Support:** Operates on **3.3 V or 5 V PCI buses**, ensuring broad system compatibility. - **On‑Board FIFO Buffer:** 2 kB FIFO for read/write operations to bridge the speed gap between the GPIB bus (~1.5 MB/s) and PCI bus (132 MB/s). - **Software Compatibility:** Binary‑compatible with **NI‑488.2** driver software and supports **VISA** library for seamless integration with existing instrument drivers. - **Plug‑and‑Play Configuration:** Automatic resource allocation via PCI BIOS; no jumper or DIP switch settings required. - **Interactive Diagnostic Utility:** ADLINK GPIB Utility for testing, configuration, and troubleshooting. - **Wide ADE Support:** Compatible with **Microsoft Visual Studio (VC++/VB/.NET)**, **Borland C++ Builder**, **Delphi**, **NI LabVIEW™**, **LabWindows/CVI™**, **Agilent TestExec**, and **MATLAB®**. - **Multi‑Instrument Control:** Supports up to **14 instruments** connected in linear, star, or hybrid topologies. - **Industrial‑Grade Reliability:** CE and FCC Class A certified for EMC/EMI compliance. - **Operating System Support:** Windows XP, Windows 7/8 (x86/x64).

Manufacturer: Adlink Technology Inc.

Category: IEEE (GPIB) Cards

Low-profile fanless embedded PC with Intel Core Ultra 200S and 2.5-inch HDD tray.

Low-profile rugged fanless embedded computer supporting Intel Core Ultra 200S LGA1851 35W/65W CPUs, Intel H810 chipset, up to 128GB DDR5-6400, 1x 2.5GbE plus 1x GbE, up to 2x USB 3.2 Gen2, 2x USB 3.2 Gen1 and 4x USB 2.0, 4 isolated DI and 4 isolated DO, HDMI, 2x DisplayPort, 2x software-programmable RS-232/422/485 and 2x RS-232, hot-swappable 2.5-inch HDD/SSD tray, internal SATA, 2x mini-PCIe, and MezIO interface.

Manufacturer: Neousys Technology

Category: No category

Low-profile fanless embedded PC with Intel Core Ultra 200S, 6 LAN and HDD tray.

Low-profile rugged fanless embedded computer supporting Intel Core Ultra 200S LGA1851 35W/65W CPUs, Intel Q870 chipset, up to 128GB DDR5-6400, 5x 2.5GbE plus 1x GbE, optional 10GBASE-T and optional PoE+ on ports 3 to 6, 8x USB 3.2 Gen2, 4 isolated DI and 4 isolated DO, HDMI, 2x DisplayPort, 2x software-programmable RS-232/422/485 and 2x RS-232, M.2 NVMe Gen5x4, hot-swappable 2.5-inch HDD/SSD tray, 2x mini-PCIe, and MezIO interface.

Manufacturer: Neousys Technology

Category: No category

- **Four 32‑bit Quadrature Encoder Channels:** Each channel supports 1×, 2×, or 4× A/B phase decoding, CW/CCW, and OUT/DIR pulse modes. - **High‑Speed Encoder Input:** Up to 18 MHz input frequency in 4× A/B mode ensures accurate position tracking for high‑speed motion systems. - **High‑Speed Trigger Output:** Four independent trigger outputs capable of up to 4.4 MHz output frequency. - **Programmable Trigger Pulse Width:** Adjustable from 0.1 µs to 3.2765 ms for flexible timing control. - **Multiple Output Interfaces:** TTL output, 5–24 V open‑collector output, and differential output interfaces for broad device compatibility. - **14 Built‑in 32‑bit Comparators:** Enable complex position comparison and multi‑trigger mapping functions. - **FIFO and Linear Comparison Modes:** 1,023‑point FIFO per channel and 10 linear comparison functions for continuous or patterned triggering. - **Optical Isolation:** 2,500 VRMS isolation for selected I/O signals ensures noise immunity and system protection. - **Flexible Trigger Modes:** Manual, linear, table, and timer‑based triggering supported. - **Software Tools:** Includes ADLINK’s TriggerMaster configuration utility and comprehensive Windows driver and API library. - **Board Index Switch:** Hardware switch for unique board identification in multi‑card systems (up to 16 cards). - **Low‑Profile PCIe Design:** Compact 151 mm × 67 mm PCB suitable for space‑constrained industrial PCs.

Manufacturer: Adlink Technology Inc.

Category: Motion Control / EtherCAT PCIe

- **Dedicated LVDS Interface for MBC-265:** Designed to seamlessly connect the MBC-265 controller board to 18-bit LCD panels, ensuring full compatibility and optimized signal mapping. - **18-bit Color Support:** Supports 18-bit (6 bits per color channel) LVDS signaling, enabling accurate color reproduction for mid-range to high-quality LCD displays. - **High-Speed Differential Signaling:** Utilizes LVDS technology to minimize electromagnetic interference (EMI) and ensure high-speed, low-noise data transmission between the controller and display. - **Integrated 1.8 m DB-25 Cable:** Supplied with a pre-terminated 1.8-meter DB-25 cable for plug-and-play connectivity, reducing setup complexity and ensuring reliable electrical performance. - **Compact and Robust Design:** Engineered for industrial and embedded environments where space efficiency and mechanical durability are critical. - **Optimized Signal Integrity:** Shielded cable and differential signaling minimize crosstalk and signal degradation, maintaining image quality even in electrically noisy environments. - **Plug-and-Play Compatibility:** No additional configuration required when used with the MBC-265; automatically recognized and supported by the controller’s firmware. - **Flexible Mounting and Integration:** Suitable for integration into display housings, control panels, or embedded systems requiring LVDS display output.

Manufacturer: No category

Category: Graphic Cards

- **Dedicated LVDS Interface for MBC-265:** Designed to extend the display connectivity of the MBC-265 controller, allowing direct connection to LVDS-compatible LCD panels. - **Support for 8-bit and 16-bit LCDs:** Offers flexible compatibility with a wide range of display modules, supporting both 8-bit and 16-bit parallel data formats. - **High-Speed Differential Signaling:** Utilizes LVDS technology to ensure high data transfer rates with minimal electromagnetic interference (EMI) and signal degradation. - **Integrated 1.8m DB-25 Cable:** Supplied with a pre-terminated, shielded DB-25 cable (1.8 meters in length) for secure and stable data transmission between the controller and display. - **Compact and Robust Design:** Engineered for industrial and embedded environments where reliability, compactness, and signal integrity are critical. - **Plug-and-Play Compatibility:** Designed for straightforward integration with the MBC-265 system, minimizing setup time and configuration complexity. - **Enhanced Signal Integrity:** Differential signaling reduces crosstalk and noise, ensuring consistent image quality even in electrically noisy environments. - **Versatile Display Support:** Suitable for a variety of LCD panels used in industrial automation, instrumentation, and embedded computing systems.

Manufacturer: No category

Category: Graphic Cards

- **High-performance ARM9 Processor:** Equipped with a 400 MHz Atmel AT91SAM9G45 CPU with integrated Memory Management Unit (MMU), enabling efficient multitasking and Linux kernel operation. - **Linux-ready Platform:** Preloaded with Linux kernel 2.6.38, U-Boot bootloader, and a complete GNU C/C++ toolchain for immediate development. - **Integrated Memory:** 128 MB DDR2 SDRAM and 256 MB NAND Flash, plus 2 MB DataFlash® for system backup. - **Compact and Efficient Design:** Small 50 × 80 mm SoM footprint with typical power consumption under 2.5 W. - **Comprehensive I/O Interfaces:** Includes Ethernet, multiple UARTs, USB host/client, I²C, SPI, I²S, SD card, GPIO, AC97, LCD, and touchscreen interfaces. - **Advanced Display Support:** 24-bit TTL LCD interface supporting TFT panels up to 1280 × 860 pixels with dimming and backlight control. - **Networking Capability:** Integrated 10/100 Mbps Ethernet interface with onboard PHY (DAVICOM DM9161) and 1.5 kV magnetic isolation. - **Rich Peripheral Support:** Compatible with USB flash drives, Wi-Fi adapters, webcams, keyboards, mice, 3G modems, and Bluetooth devices. - **Software Ecosystem:** Includes preinstalled utilities, daemons, and drivers for rapid deployment—SSH, FTP, web server (lighttpd), MySQL, PHP, Python, and more. - **Expandable and Customizable:** Supports IPKG package management for software installation and updates; customizable USB device drivers. - **Industrial-grade Reliability:** Features watchdog timers, RTC with battery backup, and robust GPIO control for embedded applications.

Manufacturer: Artila

Category: SBC Modules

- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 MPU, 536 MHz, with MMU and VFPv4 floating‑point unit. - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Operating System:** Linux kernel 4.9.x with EXT4 file system and Barebox bootloader. - **Networking:** Dual Ethernet interfaces — one Gigabit (Micrel KSZ9031RNXCA) and one 10/100 Mbps (Micrel KSZ8081RNAIA). - **Interfaces:** SPI, I²C, I²S, UART × 4, CAN × 2, USB 2.0 Host × 2, SD 2.0 (SDHC), GPIO × 21. - **Power Efficiency:** Single 5 V DC input, typical consumption 0.75 W (

Manufacturer: Artila

Category: SBC Modules

- **PCI Express 1.1 Compliance:** Ensures compatibility with standard M.2 B-M key slots supporting PCIe 1.1 interface. - **CAN Bus 2.0B Support:** Fully compliant with ISO 11898-1 and backward compatible with CAN 2.0A, enabling seamless integration with existing CAN networks. - **Wide Baud Rate Range:** Supports configurable baud rates of 10K, 20K, 50K, 100K, 250K, 500K, 800K, and 1000Kbps, allowing flexible deployment across various industrial communication speeds. - **Electrical Isolation:** Provides galvanic isolation between the CAN transceiver and host system, enhancing protection against voltage surges and ground loops. - **2.5kV HiPOT Protection:** High isolation voltage ensures safety and signal integrity in electrically noisy environments. - **ESD Protection:** Compliant with EN61000-4-2 standards, offering ±15kV air discharge and ±8kV contact discharge protection. - **Termination Resistor Control:** Onboard slide switch allows enabling or disabling of the 120Ω termination resistor for flexible network configuration. - **Industrial Temperature Range:** Operates reliably from -40°C to +85°C, suitable for rugged and outdoor applications. - **Durable Gold Finger Contacts:** 30 micro-inch gold plating ensures long-term reliability and corrosion resistance. - **Linux SocketCAN Support:** Native compatibility with Linux SocketCAN framework for easy integration into open-source and industrial Linux systems. - **Windows Compatibility:** Supports Windows 7, 8/8.1, and 10 (32/64-bit) with downloadable drivers and APIs from the MyInnodisk portal. - **Compact M.2 2242 Form Factor:** Space-efficient design ideal for embedded systems, industrial PCs, and compact controllers. - **Industrial Design and Manufacturing:** Designed and produced by Innodisk in Taiwan, ensuring high quality and consistency. - **3-Year Warranty:** Backed by Innodisk’s industrial-grade warranty for long-term reliability.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Isolated CANbus 2.0B Channels:** Provides two independent, galvanically isolated CANbus 2.0B interfaces for reliable communication in noisy industrial environments. - **Backward Compatibility:** Fully backward compatible with CANbus 2.0A, ensuring interoperability with legacy systems. - **Flexible Form Factor:** Available in both M.2 2260 and 2280 B-M key configurations, allowing integration into a wide range of embedded platforms. - **High-Speed Communication:** Supports baud rates of 100K, 125K, 250K, 500K (default), 800K, and 1000Kbps, enabling flexible network configurations. - **High Message Throughput:** Capable of receiving up to 6000 CAN messages per second, ensuring efficient data handling in real-time applications. - **Persistent Configuration:** Retains configuration settings after hardware reboot, minimizing downtime and simplifying system recovery. - **Advanced Filtering:** Supports CAN message acceptance filters for selective message processing and reduced CPU load. - **Listen-Only Mode:** Enables passive monitoring of CAN traffic without affecting bus communication. - **Linux SocketCAN Support:** Includes additional driver support for Linux SocketCAN, enhancing integration with open-source and industrial Linux systems. - **Optional Protocol Support:** Compatible with high-layer CAN protocols such as SAE J1939 and CANopen (available in specific model variants). - **Configurable Termination:** Onboard termination resistor can be enabled or disabled via jumper settings. - **Industrial-Grade Protection:** - Surge protection compliant with EN61000-4-5 (2.5kV) - ESD protection compliant with EN61000-4-2 (Air: 15kV, Contact: 8kV) - HiPOT isolation up to 2.5kV - **Durable Construction:** 30µ” gold-plated connector fingers for enhanced durability and signal integrity. - **Wide Temperature Range:** Operates reliably from -40°C to +85°C, suitable for extreme industrial conditions. - **Long-Term Reliability:** Backed by a 3-year manufacturer warranty. - **Industrial Design:** Designed and manufactured in Taiwan with strict quality control for embedded and industrial applications.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Isolated CANbus Channels:** Provides two independent, galvanically isolated CANbus 2.0B interfaces for reliable communication and noise immunity in harsh environments. - **Protocol Support:** Fully supports CANbus 2.0B and backward compatible with CAN 2.0A. The W3 variant specifically supports the SAE J1939 high-layer protocol, commonly used in heavy-duty vehicle and industrial applications. - **Flexible Form Factor:** Available in M.2 2260 and 2280 B-M key configurations, allowing integration into a wide range of embedded systems and industrial PCs. - **High Data Throughput:** Capable of receiving up to 6000 CAN messages per second, ensuring efficient data handling in high-traffic networks. - **Configurable Baud Rates:** Supports multiple baud rates—100K, 125K, 250K, 500K (default), 800K, and 1000Kbps—providing flexibility for various network configurations. - **Persistent Configuration:** Retains configuration settings after hardware reboot, minimizing setup time and ensuring consistent operation. - **Listen-Only Mode:** Enables passive monitoring of CAN traffic without affecting bus communication, ideal for diagnostics and network analysis. - **Software Support:** Includes driver support for Windows, Linux (SocketCAN), and QNX operating systems. Additional driver support for Linux SocketCAN enhances integration with open-source and industrial software stacks. - **Electrical Protection:** - 2.5kV HiPOT isolation protection - EN61000-4-5 2.5kV surge protection - EN61000-4-2 ESD protection (Air: 15kV, Contact: 8kV) - **Termination Control:** Onboard jumper allows enabling or disabling of the termination resistor for flexible network topology configuration. - **Industrial Durability:** Designed for operation in extreme environments with a wide temperature range (-40°C to +85°C) and high resistance to vibration and shock. - **High-Quality Construction:** Features 30 micro-inch gold-plated connector fingers for enhanced durability and signal integrity. - **Warranty:** 3-year limited warranty from Innodisk.

Manufacturer: Innodisk

Category: mPCIe Modules

- **M.2 2260/2280 B+M Key Compatibility:** Supports both 2260 and 2280 form factors, offering flexibility for various system designs. - **Dual USB 3.0 Ports:** Provides two independent USB 3.0 interfaces sharing a PCIe Gen2 x1 bandwidth channel. - **High-Speed Data Transfer:** Compliant with USB 3.0 Specification Revision 1.0, supporting data rates up to 5 Gbps. - **PCI Express 2.0 Compliance:** Fully compliant with PCI Express Base Specification Revision 2.0, ensuring stable and efficient data throughput. - **xHCI 1.0 Compatibility:** Supports the eXtensible Host Controller Interface (xHCI) 1.0 standard for universal USB host controller compatibility. - **Power Output Flexibility:** - With external power input: up to 5V / 900 mA per USB port. - Without external power: up to 200 mA per port. - **Industrial-Grade ESD Protection:** Meets EN61000-4-2 standards with Air Discharge up to 15 kV and Contact Discharge up to 8 kV. - **Wide Temperature Range (WT Model):** Operational range from -40°C to +85°C, suitable for industrial and outdoor environments. - **Compact and Lightweight Design:** Ideal for embedded systems, industrial PCs, and space-constrained applications. - **Low Power Consumption:** Maximum power draw of 1W (3.3V x 303 mA). - **Driver Support:** Compatible with multiple operating systems including Windows XP, Vista, 7, and Linux kernels from v2.6.0 onward. - **Plug-and-Play Functionality:** Simplified integration with minimal configuration required.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Gigabit Ethernet Connectivity:** Equipped with two independent GbE LAN ports, the module enables simultaneous dual-network operation, redundancy, or network segmentation. - **Intel® i210 Ethernet Controller:** Utilizes the Intel i210 chipset, known for its advanced network performance, low latency, and compatibility with a wide range of operating systems and drivers. - **M.2 2280 Form Factor:** Compact 22 mm x 80 mm design suitable for space-constrained embedded systems, industrial motherboards, and edge computing devices. - **PCI Express 2.1 x1 Interface:** Provides a high-speed, low-latency connection to the host system, ensuring efficient data throughput for network-intensive applications. - **Transformer on PCB:** Integrated transformer design allows for flexible cable routing and improved signal integrity between the module and external RJ45 connectors. - **External LED Indicator Support:** Dedicated LED indicator pins for link and speed status (10/100/1000 Mbps), enabling visual network diagnostics. - **Industrial-Grade Durability:** Designed for harsh environments with optional wide temperature support (-40°C to +85°C) and robust mechanical endurance. - **Electrostatic Discharge (ESD) Protection:** Complies with EN61000-4-2 standards, providing 15kV air and 8kV contact ESD protection for enhanced reliability. - **Gold-Plated Connector:** 30 micro-inch (30µ”) gold finger contacts ensure superior conductivity and long-term durability under frequent insertion cycles. - **Low Power Consumption:** Typical power draw of 2.1W (3.3V, 635mA), optimized for energy-efficient embedded applications. - **Warranty and Longevity:** Backed by a 3-year manufacturer warranty, reflecting Innodisk’s commitment to quality and long-term product support.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Gigabit Ethernet Ports:** Equipped with two independent RJ45 LAN ports, each supporting 10/100/1000 Mbps Ethernet connectivity for flexible network configurations and redundancy. - **Intel® i210 Ethernet Controller:** Integrates the Intel i210 chip, known for its stable performance, low latency, and advanced network management features, ensuring compatibility with a wide range of operating systems and network infrastructures. - **M.2 2280 Form Factor:** Compact 22 mm x 80 mm module design compliant with the M.2 2280 standard, ideal for space-constrained embedded and industrial systems. - **PCI Express 2.1 x1 Interface:** Utilizes a PCIe 2.1 x1 interface for high-speed data transfer and efficient communication between the host system and the LAN module. - **Industrial-Grade Design:** Built with robust materials and designed for industrial reliability, including vibration and shock resistance, and optional wide temperature operation (-40°C to +85°C). - **Electrostatic Discharge (ESD) Protection:** Complies with EN61000-4-2 standards, providing Air Discharge protection up to 15kV and Contact Discharge protection up to 8kV, ensuring durability in electrically noisy environments. - **Transformer on PCB:** Integrated transformer on the printed circuit board allows for flexible cable design and improved signal integrity. - **External LED Indicator Support:** Provides external LED pin headers for speed indication (10/100/1000 Mbps), enabling visual network status monitoring. - **Gold-Plated Connector:** Features a 30µ” gold finger connector for enhanced conductivity, corrosion resistance, and long-term reliability. - **Warranty and Support:** Backed by a 3-year limited warranty and supported by Innodisk’s global technical service network.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Isolated CANbus 2.0B Interfaces:** Provides two independent, galvanically isolated CAN channels for reliable communication and noise immunity. - **Backward Compatibility:** Fully compatible with CAN 2.0A and 2.0B standards, ensuring interoperability with legacy systems. - **Flexible Form Factor:** Supports both M.2 2260 and 2280 B-M key configurations, allowing integration into a wide range of embedded platforms. - **High-Speed Communication:** Supports baud rates of 100, 125, 250, 500 (default), 800, and 1000 Kbps. - **High Message Throughput:** Capable of receiving up to 6000 CAN messages per second, ensuring efficient data handling in high-traffic networks. - **Persistent Configuration:** Retains configuration settings after hardware reboot, minimizing downtime and reconfiguration effort. - **Listen-Only Mode:** Enables passive monitoring of CAN traffic without affecting bus communication. - **Software Support:** Includes driver support for Windows, Linux (SocketCAN), and QNX operating systems. - **Optional Protocol Support:** Available variants support SAE J1939 and CANopen high-layer protocols for specialized industrial and automotive applications. - **Hardware Protection:** - 2.5kV HiPOT isolation protection - EN61000-4-5 2.5kV surge protection - EN61000-4-2 ESD protection (Air: 15kV, Contact: 8kV) - **Termination Control:** Onboard jumper allows enabling or disabling of termination resistors for flexible network configuration. - **Industrial-Grade Design:** Operates in extreme environments from -40°C to +85°C, with vibration and shock resistance. - **Durable Construction:** 30 micro-inch gold-plated connector fingers ensure long-term reliability and signal integrity. - **Warranty:** 3-year limited manufacturer warranty.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Isolated CANbus Channels:** Provides two independent, galvanically isolated CANbus 2.0B interfaces for enhanced communication reliability and noise immunity. - **Protocol Support:** Fully supports CAN 2.0B and backward compatible with CAN 2.0A. Optional high-layer protocol support includes **SAE J1939** and **CANopen** (this model supports CANopen). - **Flexible Form Factor:** Available in both **M.2 2260** and **M.2 2280** B-M key configurations, allowing compatibility with a wide range of embedded platforms. - **High-Speed Communication:** Supports baud rates of **100K, 125K, 250K, 500K (default), 800K, and 1000Kbps**, enabling flexible integration into various CAN network topologies. - **High Throughput:** Capable of receiving up to **6000 CAN messages per second**, ensuring efficient data handling in demanding real-time applications. - **Persistent Configuration:** Retains configuration settings after hardware reboot, minimizing downtime and simplifying system recovery. - **Listen-Only Mode:** Allows passive monitoring of CAN traffic without affecting bus communication, ideal for diagnostics and network analysis. - **Software Support:** Includes driver support for **Windows**, **Linux (SocketCAN)**, and **QNX** operating systems. - **Enhanced Protection:** - **2.5kV HiPOT isolation** between CAN channels and system interface. - **EN61000-4-5 2.5kV surge protection** for transient voltage suppression. - **EN61000-4-2 ESD protection:** Air discharge ±15kV, contact discharge ±8kV. - **Industrial-Grade Design:** Operates reliably in extreme temperature ranges from **-40°C to +85°C**, with vibration and shock resistance suitable for rugged environments. - **Termination Control:** Onboard jumper allows enabling or disabling of CAN termination resistors for flexible network configuration. - **Durable Construction:** Features **30µ” gold-plated connector fingers** for improved conductivity and corrosion resistance. - **Warranty:** Backed by a **3-year manufacturer warranty**.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual Isolated CANbus Channels:** Provides two independent, galvanically isolated CANbus 2.0B interfaces for reliable communication in electrically noisy environments. - **Protocol Support:** Fully supports **SAE J1939** protocol, widely used in heavy-duty vehicle and industrial automation networks. - **Backward Compatibility:** Compatible with **CAN 2.0A** and **CAN 2.0B** standards, ensuring interoperability with legacy systems. - **Flexible Form Factor:** Available in **M.2 2260** and **M.2 2280** B-M key configurations; the W4 model uses the 2280 form factor. - **High Data Throughput:** Capable of receiving up to **6000 CAN messages per second**, ensuring efficient data handling in high-traffic networks. - **Configurable Baud Rates:** Supports multiple baud rates—**100K, 125K, 250K, 500K (default), 800K, and 1000Kbps**—for flexible integration into various CAN networks. - **Persistent Configuration:** Retains configuration settings after hardware reboot, minimizing downtime and reconfiguration effort. - **Listen-Only Mode:** Enables passive monitoring of CAN traffic without affecting bus communication, ideal for diagnostics and analysis. - **Software Support:** Includes driver support for **Windows**, **Linux (SocketCAN)**, and **QNX** operating systems. - **Enhanced Protection:** - **2.5kV HiPOT isolation** between CAN channels and system interface. - **Surge protection** compliant with **EN61000-4-5 (2.5kV)**. - **ESD protection** compliant with **EN61000-4-2 (Air: 15kV, Contact: 8kV)**. - **Termination Control:** Onboard jumper allows enabling or disabling of the CANbus termination resistor. - **Industrial Durability:** - Operating temperature range: **-40°C to +85°C**. - Storage temperature range: **-55°C to +95°C**. - Vibration resistance: **5G @ 7–2000Hz**. - Shock resistance: **50G @ 0.5ms**. - **High-Quality Construction:** Features **30µ” gold-plated connector fingers** for superior conductivity and durability. - **Warranty:** Backed by a **3-year manufacturer warranty**. - **Manufactured in Taiwan** under strict quality control standards.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Four Isolated CAN Channels:** Provides four independent and galvanically isolated CAN 2.0B interfaces for robust communication and noise immunity. - **M.2 2280 B-M Form Factor:** Compact design suitable for embedded and industrial systems with M.2 slots. - **PCI Express 1.1 Interface:** Ensures high-speed data transfer and compatibility with modern embedded platforms. - **CAN 2.0B Compatibility:** Fully compliant with ISO 11898-1 and backward compatible with CAN 2.0A. - **Wide Baud Rate Support:** Configurable baud rates of 10K, 20K, 50K, 100K, 250K, 500K, 800K, and 1000Kbps. - **Software Support:** Compatible with Linux SocketCAN and Windows operating systems (Windows 7/8/8.1/10, 32/64-bit). - **High Isolation Protection:** 2.5kV HiPOT isolation ensures electrical separation between CAN channels and system bus. - **ESD Protection:** Compliant with EN61000-4-2 standards (Air: ±15kV, Contact: ±8kV). - **Termination Resistor Control:** Onboard slide switch allows enabling or disabling of 120Ω termination resistors per channel. - **Industrial Temperature Range:** Operates reliably from -40°C to +85°C, suitable for harsh environments. - **Durable Construction:** 30µ” gold-plated connector fingers for enhanced durability and signal integrity. - **Low Power Consumption:** Maximum power draw of 4.3W at 3.3V (1310mA). - **Compliance and Safety:** Meets IEC 60950-1:2005 + A1:2009 + A2:2013 safety standards. - **Warranty:** 3-year limited warranty from Innodisk.

Manufacturer: Innodisk

Category: mPCIe Modules

- **High-Speed Ethernet Connectivity:** Supports multiple LAN speeds including **10G, 5G, 2.5G, 1G (1000M), 100M, and 10M**, ensuring compatibility with a wide range of network infrastructures. - **Marvell AQtion Ethernet Controller:** Utilizes a high-performance Marvell AQtion controller for reliable, low-latency data transmission and efficient power management. - **Compact M.2 2280 Form Factor:** Designed in the **M.2 2280 B-M key** format, allowing easy integration into modern embedded systems, industrial PCs, and compact computing platforms. - **PCI Express Interface:** Supports **PCI Express 3.0 x2** and **Gen2** configurations, providing high bandwidth and flexible connectivity options. - **Low Power Consumption:** Typical **TDP of 2.5W (3.3V, 762mA)**, making it suitable for fanless or thermally constrained environments. - **Industrial-Grade Design:** Built for reliability with **30µ” gold-plated connector fingers**, ensuring long-term durability and stable electrical contact. - **Environmental Robustness:** Complies with **EN61000-4-2 (ESD)** standards, providing **Air Discharge protection up to 15kV** and **Contact Discharge protection up to 8kV**. - **Wide Operating Temperature Range:** Operates reliably between **0°C and +55°C**, with storage tolerance from **-55°C to +95°C**. - **Mechanical Durability:** Tested for **vibration resistance up to 5G (7–2000Hz)** and **shock resistance up to 50G @ 0.5ms**, ensuring stability in industrial environments. - **Flexible Design:** Includes a **tiny daughter board** connected via a **high-speed shielding cable**, optimizing signal integrity and installation flexibility. - **Long-Term Reliability:** Backed by a **3-year manufacturer warranty** and supported by Innodisk’s global technical service network.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Intel® i210 Ethernet Controller:** Utilizes the Intel i210 chip, a proven and widely adopted Gigabit Ethernet controller known for its stability, low latency, and advanced network management capabilities. - **Single GbE LAN Port:** Provides one dedicated Gigabit Ethernet port for high-speed wired network connectivity, supporting 10/100/1000 Mbps data rates. - **M.2 2280 Form Factor:** Compact 22 mm x 80 mm module design compliant with the M.2 2280 standard, ideal for embedded systems, industrial PCs, and edge computing devices. - **PCI Express 2.1 x1 Interface:** Ensures high-speed data transfer between the host system and the Ethernet controller, maintaining compatibility with modern computing platforms. - **Integrated Transformer on PCB:** The onboard transformer allows flexible cable design and improved signal integrity, reducing electromagnetic interference and ensuring stable transmission. - **External LED Indicator Pin:** Provides external LED pinouts for network speed indication (10/100/1000 Mbps), enabling system integrators to implement visual network status indicators. - **Industrial Temperature Range (Optional):** Available in two temperature variants: - **Standard Temperature (C1):** 0°C to +70°C - **Wide Temperature (W1):** -40°C to +85°C This flexibility allows deployment in both commercial and harsh industrial environments. - **Enhanced ESD Protection:** Complies with EN61000-4-2 standards for electrostatic discharge: - Air Discharge: ±15 kV - Contact Discharge: ±8 kV - **Durable Gold-Plated Connector:** Features a 30 micro-inch (30µ”) gold finger contact for improved conductivity, corrosion resistance, and long-term reliability. - **Low Power Consumption:** Typical power draw of 1.6 W (3.3V, 476 mA), making it suitable for energy-efficient embedded systems. - **Industrial-Grade Design:** Designed and manufactured in Taiwan under Innodisk’s stringent quality control standards, ensuring reliability, longevity, and consistent performance. - **Warranty:** Backed by a 3-year limited warranty, reflecting Innodisk’s confidence in product durability and quality.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Intel® i210 Ethernet Controller:** Utilizes the Intel i210 chip, a proven and widely adopted Gigabit Ethernet controller known for its low latency, advanced offloading capabilities, and compatibility with multiple operating systems. - **Single GbE LAN Port:** Provides one RJ45 output interface supporting 10/100/1000 Mbps Ethernet connectivity, enabling high-speed wired network access for embedded systems. - **M.2 2280 Form Factor:** Compact design (22 mm x 80 mm) compliant with the M.2 2280 standard, allowing easy integration into space-constrained systems such as industrial PCs, edge devices, and embedded controllers. - **PCI Express 2.1 x1 Interface:** Ensures high-speed data transfer between the host system and the Ethernet controller, supporting efficient communication and minimal latency. - **Transformer on PCB:** Integrated transformer design on the printed circuit board allows for flexible cable routing and improved signal integrity, reducing electromagnetic interference (EMI). - **External LED Indicator Pin:** Provides external LED pinouts for network speed indication (10/100/1000 Mbps), enabling system integrators to implement visual network status indicators on device panels. - **Industrial Temperature Support:** Available in both standard and wide-temperature variants: - **Standard Temperature (C1):** 0°C to +70°C - **Wide Temperature (W1):** -40°C to +85°C This flexibility ensures reliable operation in harsh industrial environments. - **Enhanced Durability:** Features **30 micro-inch (30µ”) gold-plated connector fingers** for superior conductivity and corrosion resistance, ensuring long-term reliability and stable electrical contact. - **Electrostatic Discharge (ESD) Protection:** Complies with **EN61000-4-2** standards: - Air Discharge: ±15kV - Contact Discharge: ±8kV This provides robust protection against electrostatic events, safeguarding both the module and connected systems. - **Low Power Consumption:** Typical power draw of **1.6W (3.3V, 476mA)** ensures energy-efficient operation suitable for embedded and mobile platforms. - **Industrial-Grade Manufacturing:** Designed and manufactured by **Innodisk Taiwan**, ensuring adherence to stringent quality control and reliability standards. - **Warranty:** Backed by a **3-year limited warranty**, reflecting Innodisk’s commitment to product reliability and customer support.

Manufacturer: Innodisk

Category: mPCIe Modules