- **High‑Density Digital I/O:** Up to 64 isolated digital input or output channels per board, configurable by model. - PCI‑7432 / cPCI‑7432: 32 DI + 32 DO - PCI‑7433 / cPCI‑7433: 64 DI - PCI‑7434 / cPCI‑7434: 64 DO - **Electrical Isolation:** Up to **5000 Vrms channel‑to‑computer isolation** (2500 Vrms for certain rear I/O variants), protecting host systems from high‑voltage transients and ground loops. - **High Output Drive Capability:** Each output channel can sink up to **500 mA**, supporting inductive loads such as relays and solenoids. - **Wide Input Voltage Range:** Accepts **0–24 V DC** input signals with logic thresholds of 0–1.5 V (Low) and 5–24 V (High). - **High Throughput:** Supports up to **10 kHz (0.1 ms)** update rate for both input and output operations. - **Interrupt Support:** Dual interrupt sources on digital input channels 0 and 1, with external interrupt triggering capability. - **Connector Interface:** Standard **100‑pin SCSI‑II** connector for all models, ensuring compatibility with ADLINK’s DB‑100 series terminal boards. - **Form Factor Options:** Available in **PCI**, **CompactPCI (3U)**, and **CompactPCI with Rear I/O** configurations, including common‑ground and common‑power variants. - **Software Integration:** Comprehensive driver suite supporting Windows 95/98/NT/2000, DOS, and major automation environments (LabVIEW®, HP‑VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, OPC). - **Plug‑and‑Play PCI Compliance:** Fully compliant with **PCI Local Bus Specification Rev. 2.1**, using the PLX PCI‑9050 controller for automatic resource assignment.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High-Density I/O:** Up to 64 isolated digital input or output channels per board. - **Isolation Protection:** Up to 5000 Vrms channel-to-computer isolation (2500 Vrms for certain models). - **Flexible Configurations:** Available in PCI, 3U CompactPCI, and CompactPCI with rear I/O form factors. - **High Output Drive Capability:** Each output channel can sink up to 500 mA. - **Wide Input Voltage Range:** Accepts 0–24 VDC input signals with logic thresholds (H: 5–24 V, L: 0–1.5 V). - **High-Speed Operation:** Supports throughput up to 10 kHz (0.1 ms response time). - **Interrupt Support:** Dual interrupt sources on digital input channels 0 and 1. - **Connector Interface:** Standard 100-pin SCSI-II connector for all models. - **Software Integration:** Comprehensive driver support for Windows and DOS environments, including LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC. - **Plug-and-Play PCI Configuration:** Automatic resource assignment via BIOS (IRQ and I/O base address). - **Compact Form Factor:** Standard 3U CompactPCI and PCI short card dimensions for space-constrained systems. - **Rear I/O Options:** Rear transition modules available for cPCI-R variants. - **LED Indicators:** User-programmable LEDs on rear I/O models for status indication. - **Robust Design:** Optical isolation, transient suppression, and ESD protection for industrial reliability.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **PXI and CompactPCI Compatibility:** Fully compliant with PXI Specification Rev. 2.2 and PICMG 2.0 CompactPCI standards, supporting both PXI and CompactPCI 3U modules. - **Slot Configuration:** One system controller slot and five PXI/CompactPCI peripheral slots, all equipped with PXI trigger, local bus, and 10 MHz reference clock functionality. - **Modular Power Supply:** 250 W CompactPCI power module (cPS‑H325/AC) compliant with PICMG 2.11; optional 24 V DC input module (cPS‑H325/24) for mobile or vehicular use. - **Front‑Accessible Power Module:** Hot‑swappable, front‑removable PSU design for minimal mean‑time‑to‑repair (MTTR). - **Efficient Cooling:** Dual 80 mm × 80 mm × 25 mm ball‑bearing fans providing filtered, forced‑air cooling with removable air filters. - **Mechanical Flexibility:** Desk‑top or wall‑mount installation with included mounting kit; IEEE 1101.10 mechanical packaging compliant. - **Environmental Robustness:** Designed for industrial environments with wide operating temperature range, vibration tolerance, and shock resistance. - **Electrical Protection:** Over‑temperature, over‑current, over‑load, and over‑voltage protection integrated in PSU. - **Mobility and Serviceability:** Lightweight (≈ 4.5 kg) aluminum chassis with side handles and stand feet for portability. - **Regulatory Compliance:** CE, FCC Class A, EN 60950‑1 safety, EN 55022/55024 EMC compliance.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **PXI and CompactPCI Compatibility:** Fully compliant with PXI Specification Rev. 2.2 and PICMG 2.0 standards, supporting both PXI and CompactPCI 3U modules. - **Slot Configuration:** One system controller slot and five PXI/CompactPCI peripheral slots, all equipped with PXI‑specific features such as 10 MHz reference clock, trigger bus, local bus, and star trigger. - **Modular Power Supply:** 250 W 24 V DC CompactPCI power module (PICMG 2.11 compliant) with front‑accessible design for easy replacement and reduced MTTR. - **Cooling System:** Filtered, forced‑air cooling with two 80 × 80 × 25 mm ball‑bearing fans delivering 47.2 CFM each, ensuring stable thermal performance. - **Mechanical Design:** 4U‑height compact chassis with wall‑mount and desk‑mount options; includes wall‑mount kit and foot stands. - **Environmental Robustness:** Designed for operation from 0 °C to 50 °C and storage from –20 °C to 70 °C; shock‑resistant up to 15 G and vibration‑tested to 0.5 G RMS. - **Electrical Performance:** Typical output currents of +5 V @ 25 A, +3.3 V @ 18 A, +12 V @ 5 A, and –12 V @ 0.5 A; maximum combined output 250 W continuous, 300 W peak. - **Ease of Maintenance:** Hot‑swappable fans and modular PSU accessible from the front panel. - **Compliance:** CE, FCC Class A, EN 55022/55024, EN 60950‑1 safety certified. - **Recommended Controllers:** ADLINK PXI‑3900 or PXI‑3800 series system controllers.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **PXI Specification Rev. 2.2 Compliance:** Ensures interoperability with PXI and CompactPCI modules. - **8‑Slot Configuration:** One system slot and seven PXI/cPCI peripheral slots for flexible system expansion. - **Intelligent Chassis Management:** Built‑in control board monitors fan speed, internal temperature, and DC voltages; supports remote monitoring and control via RS‑232. - **Automatic Fan Speed Control:** Dynamic adjustment minimizes noise and optimizes cooling. - **Extended Operating Temperature:** Stable operation from 0 °C to 55 °C verified by chamber testing. - **Low Acoustic Emission:** 41.6 dBA at minimal fan speed for quiet laboratory environments. - **Lightweight Aluminum Construction:** 5.9 kg (PXIS‑2508) for portability and durability. - **Integrated Display (PXIS‑2558T):** 8.4″ TFT LCD, 800 × 600 resolution, with resistive touch panel for direct user interaction. - **Industrial‑Grade 350 W AC Power Supply:** Universal 100–240 V AC input with multiple regulated DC outputs. - **Front‑Panel Indicators:** Power, temperature, and fan status LEDs with alarm reset functionality. - **Optional Rack‑Mount Kit:** Allows recessed installation up to 10 cm for cable and connector clearance. - **Silent Operation and Efficient Cooling:** Two 60 CFM fans with filters provide 25 W per‑slot cooling capacity. - **Remote Power Control:** Chassis can be powered on/off remotely through RS‑232 commands.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **PXI Specification Compliance:** Fully compliant with PXI Specification Rev. 2.2 and CompactPCI standards, ensuring interoperability with a wide range of PXI and cPCI modules. - **Slot Configuration:** 8 total slots — one system controller slot and seven PXI/CompactPCI peripheral slots. - **Integrated Display:** 8.4" TFT LCD with 800 × 600 resolution and resistive touch panel (PXIS‑2558T only). - **Intelligent Chassis Management:** Built‑in control board monitors internal temperature, fan speed, and DC voltages; supports automatic fan speed control and remote power management via RS‑232. - **Silent Operation:** Low‑noise design with automatic fan speed regulation; acoustic emission as low as 41.6 dBA at minimal fan speed. - **Extended Temperature Range:** Reliable operation from 0 °C to 55 °C ambient temperature. - **Lightweight Construction:** Rugged aluminum‑metal chassis weighing approximately 6.4 kg. - **Industrial‑Grade Power Supply:** 350 W AC power unit with wide input range (100–240 VAC, 50–60 Hz). - **Front‑Panel Indicators:** LED indicators for power, temperature, and fan status. - **Rear I/O Support:** Rear transition module interface for PXI controllers with rear I/O capability. - **Remote Monitoring:** RS‑232 monitoring port for remote chassis status reporting and control. - **Optional Rack‑Mount Kit:** Allows flexible installation and recessed mounting up to 10 cm for integration with external connectors or mass interconnect modules. - **Low Acoustic Emission:** 41.6 dBA (min) / 47.3 dBA (max) sound pressure level, tested per ISO 7779:1999/Amd. 1:2003(E).

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **14‑Slot Architecture:** One system controller slot and thirteen PXI/CompactPCI peripheral slots. - **PXI Specification Rev. 2.2 Compliance:** Supports PXI features such as 10 MHz reference clock, trigger bus, local bus, and star trigger routing. - **Compact 3U Design:** 483 mm (W) × 178 mm (H) × 258 mm (D) chassis optimized for rackmount or benchtop use. - **Industrial‑Grade 500 W Power Supply:** 2U ATX AC power supply with 100–240 V AC input range and full‑load output of 500 W. - **Hot‑Swappable Cooling Fans:** Five front‑accessible 80 × 80 × 15 mm ball‑bearing fans (31 CFM each) for continuous operation and reduced MTTR. - **Comprehensive System Monitoring:** Front‑panel LEDs and buzzer alarm for voltage, temperature, and fan status. - **Filtered Forced‑Air Cooling:** Bottom‑mounted fan trays with removable air filters ensure efficient airflow and easy maintenance. - **PXI/CompactPCI Interoperability:** Fully compatible with both PXI and CompactPCI 32‑bit/33 MHz and 64‑bit/66 MHz modules. - **Star Trigger and Local Bus Support:** Dedicated trigger lines and local bus interconnections for synchronized multi‑module operation. - **OEM Customization Options:** Configurable power supply (AC/DC), chassis color, and logo branding available for OEM applications.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **PXI/CompactPCI Compatibility:** Fully supports 3U PXI and CompactPCI modules, compliant with PXI Specification Rev. 2.2 and PICMG 2.0. - **18‑Slot Architecture:** One system slot and 17 peripheral slots, including a dedicated star‑trigger slot and two PXI‑to‑PXI bridges dividing the backplane into three PCI bus segments. - **Redundant Power System:** Dual 460 W ATX‑form‑factor power supplies (1 + 1 redundancy) with universal 100–240 V AC input, hot‑swappable for zero‑downtime maintenance. - **Advanced Cooling:** Five front‑accessible, hot‑swappable 80 × 80 × 15 mm ball‑bearing fans (31 CFM each) with filtered, forced‑air cooling and removable air filters. - **System Monitoring:** Integrated alarm module with LED indicators and buzzer for power, temperature, and fan status; includes reset buttons for alarm and power events. - **Mechanical Design:** 3U PXI form factor in a 4U rackmount enclosure (483 × 178 × 445 mm), 19 kg weight, IEEE 1101.10 compliant. - **Clock and Trigger Distribution:** 10 MHz reference clock distributed to all peripheral slots with

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **PXI and CompactPCI Compatibility:** Fully compliant with PXI Specification Rev. 2.2 and CompactPCI (PICMG 2.0) standards, supporting both PXI and CompactPCI 3U modules. - **Slot Configuration:** One system controller slot and seven PXI/CompactPCI peripheral slots, with three controller expansion slots to the left of the system slot. - **Industrial‑Grade Power:** Integrated 400 W ATX power supply (APS‑940XA) with auto‑ranging 90–260 VAC input and multiple DC outputs (+3.3 V, +5 V, +12 V, −12 V). - **Advanced Cooling System:** Five front‑accessible, hot‑swappable 80 mm × 80 mm × 15 mm ball‑bearing fans (36 CFM each) with removable air filters and forced‑air cooling architecture. - **System Monitoring:** Front‑panel LEDs and audible alarm for voltage, temperature, and fan status; includes alarm reset button. - **Hot‑Swappable Fans:** Enables replacement during operation, minimizing downtime and reducing Mean‑Time‑To‑Repair (MTTR). - **PXI Timing and Triggering:** Integrated 10 MHz reference clock, PXI trigger bus, star trigger, and local bus for precise synchronization between modules. - **Mechanical Compliance:** IEEE 1101.10 mechanical packaging standard for PXI/CompactPCI modules. - **Rugged Design:** Shock‑resistant (15 G, 11 ms) and vibration‑tolerant (0.5 G RMS operating, 1.88 G RMS non‑operating). - **Flexible Installation:** 3U height, 19‑inch rackmount or benchtop configuration. - **OEM Customization:** Options for backplane type, redundant power supply, chassis color, and logo branding.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **Full HD Uncompressed Video:** Supports 1920 × 1080p at 60 frames per second (fps) with 10-bit high-resolution analog-to-digital conversion (ADC). - **Multi-Format Video Input:** Compatible with HDMI, DVI, RGB, YPbPr, S-Video, and NTSC/PAL composite signals. - **Audio Capture:** Supports HDMI and S/PDIF (optical Toslink and coaxial RCA) digital audio inputs. - **High Bandwidth:** 170 MHz video bandwidth for uncompressed RGB 32/30/24-bit and YCrCb 4:4:4/4:2:2 formats. - **HDCP Support:** Compliant with High-Bandwidth Digital Content Protection for secure digital content capture. - **Configurable EDID:** Allows user-defined Extended Display Identification Data for flexible display emulation. - **Integrated Frame Buffer:** 512 MB DDR2 onboard memory for stable, high-speed data streaming. - **DirectShow SDK:** Includes comprehensive software development kit with DirectShow and API support for Windows platforms. - **PXI Express Interface:** Fully compliant with PXI Express Rev. 1.0, ensuring high throughput and synchronization in modular test systems. - **Direct SDK Support:** Provides low-level API for C/C++, C#, and VB.NET for custom application development. - **Environmental Compliance:** RoHS and WEEE compliant, reflecting ADLINK’s environmental responsibility.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **PXI Express Specification Rev. 1.0 Compliant** – Ensures full interoperability with PXIe chassis and controllers. - **Eight Simultaneous Analog Inputs** – Each channel sampled concurrently for phase‑coherent measurements. - **24‑Bit Sigma‑Delta ADCs** – High‑resolution conversion with superior dynamic range and low noise. - **Sampling Rate:** Up to 192 kS/s per channel. - **Input Range:** ±10 V or ±1 V, software‑selectable. - **AC/DC Coupling:** Software‑selectable with 0.5 Hz cutoff frequency for AC mode. - **Integrated IEPE Excitation:** 4 mA constant current per channel, 24 V compliance, for accelerometers and microphones. - **Auto‑Calibration:** Onboard reference (+5.000 V) with

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High-Bandwidth PCIe Gen 2 x8 Interface:** Provides up to 4 GB/s system throughput, ensuring fast data exchange between the host PC and PXI Express chassis. - **Dual-Port PXIe Design:** The PXIe-8638D features dual ports, enabling multi-chassis configurations and the ability to control up to two independent PXI Express segments from a single controller. - **Star Fabrics Architecture:** Implements a star-fabric topology for optimized data routing and reduced latency across multiple PXI Express modules. - **Extended Connectivity:** Supports shielded copper cables up to 10 meters in length (standard kits include 2 m or 5 m options), allowing flexible system placement and remote operation. - **Comprehensive Hardware and Software Transparency:** The system automatically detects PXI Express modules without requiring additional drivers or software, simplifying setup and integration. - **PXI Express and PCI Express Compliance:** Fully compliant with PXI-5 PXI Express Hardware Specification Rev. 1.0 and PCI Express Base Specification Rev. 1.0a. - **Flexible Link Configuration:** Supports multiple PXI Express link configurations, including: - Four-link configuration: x4 x4 x4 x4 - Two-link configuration: x16 x8 - **Robust Environmental Design:** Operates reliably in industrial environments with an operating temperature range of 0°C to 55°C and storage temperature from -20°C to 70°C. - **Compact Form Factor:** The PXIe-8638D module conforms to the 3U Eurocard PXI Express form factor, while the PCIe-8638 host card is a low-profile PCIe x8 card suitable for standard desktop or rackmount PCs.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **High-Speed PCI Express Connectivity:** Utilizes **PCI Express Gen 2 x8** signaling to achieve a maximum system throughput of **4 GB/s**, ensuring rapid data exchange between host and PXI Express chassis. - **PXI Express Hardware Compliance:** Fully compliant with **PXI-5 PXI Express Hardware Specification Rev. 1.0**, guaranteeing compatibility with standard PXI Express chassis and modules. - **Flexible Link Configuration:** Supports multiple PXI Express link configurations, including: - Four-link configuration: **x4 x4 x4 x4** - Two-link configuration: **x16 x8** - **Extended Expansion Distance:** Supports cable lengths of **2 meters** or **5 meters**, allowing flexible system placement and multi-chassis expansion up to 5 meters from the host. - **Comprehensive Hardware and Software Transparency:** The system provides full transparency, enabling automatic detection of PXI modules without requiring additional drivers or software installation. - **Star Fabrics Architecture:** Implements a star-fabric topology for efficient data routing and minimal latency across multiple PXI Express segments. - **Multi-Chassis Capability:** Enables control of up to **two PXI Express segments** from a single PXIe-8638 module, supporting scalable test and measurement systems. - **Robust Physical Design:** Constructed with **shielded copper cabling** and **RJ45-style connectors**, ensuring signal integrity and electromagnetic interference (EMI) protection over extended distances.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **PXI Express Specification Rev. 1.0 Compliant:** Ensures full compatibility with PXIe chassis and controllers, supporting high-speed data transfer via PCI Express Gen 1 x4 interface. - **High Sampling Rate:** Up to 100 mega-samples per second (MS/s) per channel, enabling accurate capture of fast transient signals. - **High Resolution:** 14-bit analog-to-digital conversion (ADC) provides fine granularity and high dynamic range for precision measurements. - **Simultaneous 8-Channel Acquisition:** All eight analog input channels can sample concurrently, maintaining phase alignment and timing accuracy. - **Wide Analog Bandwidth:** Up to 100 MHz bandwidth (PXIe-9848), suitable for high-frequency signal analysis. - **Programmable Input Voltage Ranges:** ±0.2 V or ±2 V for PXIe-9848; extended ±100 V range for PXIe-9848H with integrated x15/x50 attenuator module. - **Selectable Input Impedance:** Software-selectable 50 Ω or 1 MΩ input impedance for flexible signal interfacing. - **Large Onboard Memory:** 512 MB acquisition memory (64 MB per channel) for extended data capture without host intervention. - **Scatter-Gather DMA Data Transfer:** High-speed, efficient data streaming to host memory for continuous acquisition. - **Comprehensive Triggering Options:** Supports software, external digital, analog, PXI_STAR, PXI trigger bus, and PXIe_DSTARB sources with multiple trigger modes (pre-, post-, middle, and delay). - **External Digital Trigger Input:** TTL-compatible (3.3 V/5 V), configurable threshold (0.8 V–3.3 V), and polarity selection. - **Auto-Calibration:** Built-in self-calibration ensures long-term measurement accuracy and stability. - **Software and OS Support:** Compatible with Windows and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and .NET environments. - **High Dynamic Performance:** SINAD up to 65 dB, SNR up to 66 dB, and SFDR up to 74 dB for PXIe-9848; optimized spectral characteristics for PXIe-9848H with attenuator. - **Scalable System Integration:** Multiple PXIe-9848 modules can be synchronized for up to 64 channels in a single 9-slot PXIe chassis.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **PXI Express Specification Rev. 1.0 Compliant:** Ensures full compatibility with PXI Express chassis and controllers. - **High Sampling Rate:** Up to 100 MS/s per channel with simultaneous sampling across all eight inputs. - **High Resolution:** 14‑bit ADC resolution (1 in 16,384) for precise signal digitization. - **Wide Bandwidth:** Up to 100 MHz analog input bandwidth (PXIe‑9848); 45 MHz / 35 MHz for PXIe‑9848H with ×15 / ×50 attenuation. - **High Voltage Input Capability:** Programmable input ranges of ±0.2 V, ±2 V, or ±100 V max (PXIe‑9848H). - **Selectable Input Impedance:** 50 Ω or 1 MΩ, software‑configurable. - **Large Onboard Memory:** 512 MB total (64 MB per channel) for extended acquisition sessions. - **Scatter‑Gather DMA:** High‑speed data streaming to host memory with minimal CPU overhead. - **Flexible Triggering:** Supports software, external digital, analog, PXI_STAR, PXIe_DSTARB, and PXI Trigger Bus [0–7] sources. - **Auto‑Calibration:** Fully automated offset and gain calibration using onboard reference circuitry. - **Multi‑Module Synchronization:** Supports synchronization of up to 64 channels in a single 9‑slot PXIe chassis. - **Software Support:** Drivers and SDKs for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio .NET. - **Operating System Compatibility:** Windows 7/8 (x86/x64) and Linux. - **High Dynamic Performance:** SFDR up to 74 dB, SINAD up to 65 dB, ENOB up to 10.6 bits. - **Environmental Robustness:** Operational temperature 0 °C – 55 °C; storage –20 °C – 80 °C. - **Regulatory Compliance:** CE and FCC Class A certified.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High Sampling Rate:** Up to 200 MS/s real‑time sampling for single‑channel analog input. - **High Resolution:** 14‑bit ADC providing 1 in 16,384 quantization levels for precise signal representation. - **Input Range & Impedance:** ±1 V input range, 50 Ω ± 2 % impedance, DC‑coupled input. - **Wide Bandwidth:** Analog input bandwidth of 100 MHz (‑3 dB). - **High‑Speed Interface:** PCI Express x4 or PXIe x4 bus interface supporting sustained data throughput up to 400 MB/s. - **Onboard Memory:** 16 K‑sample FIFO buffer for temporary data storage. - **Triggering:** Supports software and external digital triggers; post‑trigger, delay‑trigger, and re‑trigger modes. - **Auto‑Calibration:** Built‑in reference circuit with ±5 ppm/°C drift for automatic offset and gain calibration. - **Scatter‑Gather DMA:** High‑speed, continuous data streaming using bus‑mastering DMA with scatter‑gather capability. - **Auxiliary Digital I/O:** 8‑bit static DIO or 2‑bit synchronous digital input (SDI) for mixed‑signal acquisition. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW, MATLAB, and ADLINK DAQPilot. - **Compact Design:** Standard short PCIe card dimensions (106.7 mm × 174.6 mm). - **Connectivity:** Three SMA connectors for analog input, external trigger input, and trigger output. - **Certifications:** CE, FCC Class A, and full EMC/EMI compliance.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **High‑Speed Sampling:** Up to 200 MS/s per channel simultaneous sampling. - **High Resolution:** 14‑bit analog‑to‑digital conversion with excellent linearity and dynamic range. - **Dual Analog Inputs:** Two single‑ended channels with software‑selectable coupling (AC/DC) and impedance (50 Ω or 1 MΩ). - **Programmable Input Ranges:** ±0.2 V, ±2 V, or ±10 V full‑scale ranges. - **Wide Bandwidth:** 90 MHz (‑3 dB) analog input bandwidth. - **Large Onboard Memory:** 1 GB shared acquisition memory for high‑speed buffering. - **High Data Throughput:** Continuous streaming up to 800 MB/s via PCIe Gen 2 ×4 interface. - **Scatter‑Gather DMA:** Efficient, CPU‑independent data transfer supporting large, non‑contiguous memory blocks. - **Advanced Triggering:** Software, external digital, analog, and SSI (System Synchronized Interface) triggers with multiple modes (pre‑, post‑, middle‑, and delayed‑trigger). - **External Clocking:** Accepts external reference or sampling clocks (40 MHz–200 MHz). - **Auto‑Calibration:** Fully automated onboard calibration with EEPROM‑stored constants. - **Signal Averaging:** Hardware‑based averaging for noise reduction without CPU overhead. - **Synchronization:** SSI bus for multi‑module synchronization (ACL‑eSSI‑2/3/4 cables). - **Software Support:** Compatible with LabVIEW®, MATLAB®, Visual Studio®, and ADLINK DAQPilot SDK. - **Operating Systems:** Windows XP/7/8 (x86/x64). - **Compliance:** PCI Express 2.0, CE, FCC Class A, RoHS, and WEEE.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PXI/PXIe

- **Purpose-Built Replacement:** Designed as a direct spare or replacement fan for ADLINK PXIS-2700 and PXIS-2600 chassis systems. - **Optimized Cooling Performance:** Maintains proper airflow and temperature regulation for PXI modules, ensuring stable operation and extended component lifespan. - **High Reliability:** Built with industrial-grade bearings and materials to support continuous operation in mission-critical applications. - **Plug-and-Play Compatibility:** Matches the mechanical and electrical specifications of the original chassis fan assembly, allowing straightforward replacement without modification. - **Noise and Vibration Control:** Engineered for low acoustic noise and minimal vibration, preserving measurement accuracy and system stability. - **Durable Construction:** Designed to withstand extended use in laboratory, manufacturing, and field environments. - **Manufacturer Certified:** Genuine ADLINK component ensuring full compatibility and compliance with PXIS chassis design standards.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **Processor:** Intel® Celeron® N3060 dual‑core SoC, 1.6 GHz base frequency, up to 2.48 GHz burst frequency, 2 MB L2 cache, 6 W TDP. - **Memory:** 2 GB DDR3L‑1600 SODIMM (expandable up to 8 GB via two SODIMM slots). - **Fanless Design:** Completely fanless aluminum chassis for silent operation and high reliability in dusty or vibration‑prone environments. - **Triple Independent Display Support:** 1 × DisplayPort 1.1a (up to 2560 × 1600 @ 60 Hz), 1 × VGA (up to 1920 × 1200 @ 60 Hz), and optional LVDS or secondary DisplayPort. - **Rich I/O Connectivity:** - 3 × Intel I211 Gigabit Ethernet ports - 2 × RS‑232/422/485 and 2 × RS‑232 serial ports - 2 × USB 3.0 and 4 × USB 2.0 external ports plus 1 × internal USB 2.0 - 4 × digital inputs and 4 × digital outputs (TTL type) - 1 × CFast slot and 1 × 2.5″ SATA HDD/SSD bay - 1 × full‑size Mini PCIe slot with USIM socket for wireless expansion - **Wide‑Range Power Input:** 6 – 36 V DC input with reverse polarity, under‑voltage, and over‑voltage protection. - **Operating Temperature:** Standard 0 – 50 °C; extended –20 – 70 °C (with industrial‑grade SSD/CFast). - **Compact Form Factor:** 210 (W) × 170 (D) × 53 (H) mm; 1.5 kg. - **Built‑in ADLINK SEMA 3.5:** Intelligent system monitoring and management (temperature, voltage, watchdog, power control). - **OS Support:** Windows 10 IoT Enterprise CBB, Windows 7 Pro/WES7, Linux, QNX (by request). - **Last Generation Supporting Windows 7:** Ideal for legacy industrial systems requiring continued Windows 7 compatibility.

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Processor:** Intel® Celeron® N3060 dual-core SoC (1.6 GHz base, up to 2.48 GHz burst) - **Memory:** 4 GB DDR3L-1600 SODIMM (expandable up to 8 GB) - **Fanless Design:** Passive cooling for silent, reliable operation in harsh environments - **Display Support:** Up to three independent displays via DisplayPort, VGA, and optional LVDS - **Rich I/O Interfaces:** - 3× Intel® I211 Gigabit Ethernet ports - 2× RS-232/422/485 and 2× RS-232 ports (optional COM5/6) - 2× USB 3.0 and 4× USB 2.0 ports - 4× digital inputs and 4× digital outputs (TTL type) - **Storage Options:** 1× 2.5" SATA HDD/SSD bay and 1× CFast socket - **Expansion:** 1× full-size Mini PCIe slot with USIM socket for wireless modules - **Power Input:** Wide-range 6–36 VDC input with protection circuits - **Operating Temperature:** 0–50°C standard; -20–70°C with industrial-grade SSD/RAM - **Compact Form Factor:** 210 × 170 × 53 mm, 1.5 kg - **Software Support:** Windows 10 IoT Enterprise, Windows 7 Pro/WES7, Linux, QNX (by request) - **Manageability:** Integrated ADLINK SEMA 3.5 for system monitoring and remote management - **Compliance:** CE/FCC Class A, UL (by CB), EN61000-6-4/-2 EMC standards

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Processor:** Intel® Celeron® N3060 dual‑core SoC (1.6 GHz base, up to 2.48 GHz burst, 2 MB L2 cache, 6 W TDP). - **Memory:** 2× DDR3L SODIMM slots supporting up to 8 GB total capacity at 1600 MHz. - **Display Support:** Up to three independent displays via DisplayPort 1.1a (2560×1600 @ 60 Hz), VGA (1920×1200 @ 60 Hz), and optional LVDS or secondary DisplayPort. - **Fanless Design:** Completely passive cooling for silent operation and high reliability in harsh environments. - **Rich I/O Interface:** - 3× Intel I211 Gigabit Ethernet ports - 2× RS‑232/422/485 and 2× RS‑232 ports (optional COM5/6) - 2× USB 3.0 and 4× USB 2.0 external ports plus 1× internal USB 2.0 - 4× digital inputs and 4× digital outputs (TTL type) - Audio (Line‑out/Mic‑in, optional 2 W × 2 amplifier) - **Expansion:** 1× full‑size Mini PCI Express slot with USIM socket for wireless modules (Wi‑Fi, LTE, LoRa, GPS). - **Storage:** 1× 2.5″ SATA 3.0 HDD/SSD bay and 1× CFast slot (hot‑swappable). - **Power Input:** Wide‑range 6–36 V DC input with reverse polarity, over‑ and under‑voltage protection. - **Manageability:** Integrated ADLINK SEMA 3.5 (Smart Embedded Management Agent) for remote monitoring and control. - **Operating System Support:** Windows 10 IoT Enterprise, Windows 7 Pro/WES7, Linux, and QNX (on request). - **Environmental Endurance:** Standard 0 – 50 °C; extended –20 – 70 °C with industrial‑grade SSD/CFast. - **Compact Form Factor:** 210 × 170 × 53 mm, 1.5 kg aluminum chassis with VESA 100 and optional DIN‑rail mounting.

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Processor:** Intel® Celeron® N3160 Quad-Core SoC (1.6 GHz base, up to 2.24 GHz burst, 2 MB L2 cache, 6 W TDP). - **Memory:** Two DDR3L SODIMM slots supporting up to 8 GB (1600 MHz). - **Display Support:** Up to three independent displays via DisplayPort, VGA, and optional LVDS or secondary DisplayPort. - **Fanless Design:** Completely fanless aluminum chassis for silent operation and high reliability in harsh environments. - **Rich I/O Interfaces:** - 3× Intel® I211 Gigabit Ethernet ports - 2× RS-232/422/485 and 2× RS-232 ports (optional COM5/6) - 2× USB 3.0, 4× USB 2.0, 1× internal USB 2.0 dongle - 4× Digital Inputs and 4× Digital Outputs (TTL type) - Audio Line-out/Mic-in (Realtek ALC269Q) - **Expansion:** 1× full-size Mini PCIe slot with USIM socket for wireless modules (Wi-Fi, 3G, 4G LTE, LoRa, GPS). - **Storage Options:** 1× 2.5" SATA HDD/SSD bay and 1× CFast socket (hot-pluggable). - **Power Input:** Wide-range 6–36 VDC input with protection against under/over-voltage and reverse polarity. - **Operating System Support:** Windows 10 IoT Enterprise, Windows 7 Pro/WES7, Linux, and QNX (on request). - **Manageability:** Integrated ADLINK SEMA 3.5 (Smart Embedded Management Agent) for remote monitoring and control. - **Environmental Durability:** Operating temperature range from 0°C to 50°C (standard) or -20°C to +70°C (with industrial SSD/CFast). - **Mounting Options:** VESA 100 mm and optional DIN rail kit. - **Certifications:** CE/FCC Class A, UL (by CB), EN61000-6-4/-2 EMC compliance, RoHS/WEEE environmental compliance.

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Processor:** Intel® Celeron® Quad‑Core N3160 SoC (1.6 GHz base, up to 2.24 GHz burst, 2 MB L2 cache, 6 W TDP). - **Memory:** 4 GB DDR3L‑1600 SODIMM (expandable to 8 GB via 2 slots). - **Display Support:** Up to three independent displays via DisplayPort 1.1a, VGA, and optional LVDS or second DP. - **Fanless Design:** Completely passive cooling for silent, maintenance‑free operation. - **Rich I/O:** - 3 × Intel I211 Gigabit Ethernet ports - 2 × RS‑232/422/485 + 2 × RS‑232 (serial) - 2 × USB 3.0 + 4 × USB 2.0 + 1 × internal USB 2.0 - 4 × digital inputs + 4 × digital outputs (TTL) - Audio (Line‑out/Mic‑in) - **Expansion:** 1 × full‑size Mini PCI Express slot with USIM socket for wireless modules (Wi‑Fi, 3G/4G LTE, LoRa, GPS). - **Storage:** 1 × 2.5″ SATA HDD/SSD bay and 1 × CFast socket (hot‑swappable). - **Power Input:** Wide‑range 6 – 36 V DC input with reverse polarity, over/under‑voltage protection. - **Operating Temperature:** - Standard 0 – 50 °C (with HDD) - Extended –20 – 70 °C (with industrial SSD/CFast) - **Manageability:** Integrated ADLINK SEMA 3.5 (System Embedded Management Agent) for remote monitoring and control. - **Security:** Optional TPM 2.0 module for hardware‑based encryption. - **Mounting:** VESA 100 standard mount and optional DIN rail kit. - **OS Support:** Windows 10 IoT Enterprise CBB, Windows 7 Pro/WES7, Linux, QNX (by request).

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Processor:** Intel® Celeron® Quad-Core N3160, 1.6 GHz (burst up to 2.24 GHz), 2 MB L2 cache, 6 W TDP. - **Memory:** 8 GB DDR3L-1600 via dual SODIMM slots (max 8 GB). - **Display Support:** Up to three independent displays via DisplayPort, VGA, and optional LVDS or secondary DP. - **Fanless Design:** Passive cooling for silent, maintenance-free operation. - **Rich I/O Interface:** - 3× Intel I211 Gigabit Ethernet ports - 2× RS-232/422/485, 2× RS-232 (optional 2× RS-232/422/485) - 2× USB 3.0, 4× USB 2.0, 1× internal USB 2.0 - 4× Digital Input, 4× Digital Output (TTL type) - Audio Line-out/Mic-in - **Expansion:** 1× full-size Mini PCIe slot with USIM socket for wireless modules (Wi-Fi, LTE, LoRa, GPS). - **Storage:** 1× 2.5" SATA 3.0 HDD/SSD bay, 1× CFast slot (hot-pluggable). - **Power Input:** Wide-range 6–36 VDC input with protection (UVP, OVP, reverse polarity). - **Operating Temperature:** - Standard: 0°C to 50°C - Extended: -20°C to +70°C (with industrial-grade SSD/CFast). - **Manageability:** Integrated ADLINK SEMA 3.5 for system monitoring and remote management. - **Security:** Optional TPM 2.0 module. - **OS Support:** Windows 10 IoT Enterprise, Windows 7 Pro/WES7, Linux, QNX (by request). - **Certifications:** CE/FCC Class A, UL (by CB), EN61000-6-4/-2 EMC compliance.

Manufacturer: Adlink Technology Inc.

Category: Atom Powered Embedded

- **Quad‑Channel Real‑Time Video Capture:** Simultaneous acquisition of four analog video inputs using four Connexant 878A encoders. Each channel supports full‑frame, real‑time capture at 30 fps (NTSC) or 25 fps (PAL). - **Multi‑Format Video Compatibility:** Supports standard composite color formats (NTSC‑M, NTSC‑Japan, PAL‑B/D/G/H/I/M/N, SECAM) and monochrome standards (CCIR, EIA/RS‑170). - **Programmable Resolution and Scaling:** Adjustable capture resolution including square‑pixel (640 × 480 NTSC, 768 × 576 PAL) and broadcast resolutions. Hardware scaling down to 1:16 and region‑of‑interest cropping supported. - **Image Adjustment Controls:** Software‑configurable hue, brightness, contrast, and saturation (0–200 %) with automatic chrominance gain control. - **Channel Extension Capability:** Expandable up to 8 video channels via 10‑pin ribbon cable headers for additional inputs. - **Status Indication:** On‑board LEDs provide per‑channel video status feedback. - **User EEPROM:** 1 Kbit non‑volatile memory for user‑defined data storage. - **Watchdog Timer:** Hardware watchdog monitors system activity and can reset the host PC after a programmable timeout, ensuring fault‑tolerant operation. - **Software Support:** WDM drivers for Windows 98/NT/2000/XP; compatible with Visual C++, Visual Basic, Borland C++ Builder, and Delphi. Includes ViewCreator utility for configuration and testing. - **I/O and Triggering:** TTL‑compatible general‑purpose I/O lines (4 in/4 out/4 software triggers) with overload and ESD protection. Programmable trigger pulse width from 60 µs to 16 ms. - **API and SDK:** Comprehensive function library for image capture, configuration, GPIO control, EEPROM access, watchdog, and software triggering.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber