- **Processor:** Atmel ATSAMA5D35 ARM Cortex‑A5 CPU, 536 MHz with MMU - **Memory:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, 8 MB DataFlash for system backup - **Operating System:** Linux kernel 4.9.x (Debian‑based, apt‑get package management) - **Networking:** Dual Ethernet (1 × Gigabit + 1 × 10/100 Mbps) - **Serial Interfaces:** 8 × RS‑485 ports (4 isolated @ 1500–2500 Vrms, 4 non‑isolated), one port switchable to RS‑232 - **CAN Bus:** 2 × CAN 2.0 A/B compliant ports, up to 1 Mbps, 1500–2500 Vrms isolation - **USB:** 4 × USB 2.0 Host ports (480 Mbps), 1 × micro‑USB console port - **Expansion:** 1 × miniPCIe slot (full/half‑size), 1 × microSD slot (SDHC, up to 64 GB) - **Power Input:** 9 – 48 V DC via terminal block,

Manufacturer: Artila

Category: IoT Gateway

- **Processor & Architecture:** Atmel ATSAMA5D35 ARM Cortex-A5 CPU, 536 MHz with MMU. - **Memory & Storage:** 512 MB LPDDR2 SDRAM, 8 GB eMMC Flash, and 8 MB DataFlash for system backup. - **Operating System:** Linux kernel 4.9.x / 4.14.x, bootable from eMMC or microSD. - **Networking:** Dual Ethernet ports (1 × Gigabit, 1 × 10/100 Mbps), dual miniPCIe slots for LTE/4G/3G/Wi-Fi modules, and dual micro-SIM sockets for cross-zone communication. - **Serial Communication:** 4 × isolated RS-485 (1500 Vrms), 2 × CAN bus 2.0 A/B (2500 Vrms isolation, up to 1 Mbps). - **USB & Console:** 2 × USB 2.0 host ports, 1 × micro-USB console port. - **Digital I/O:** 2 × isolated digital inputs (5–24 V logic high, 5000 Vrms isolation), 2 × solid-state relay outputs (80 VDC @ 1.5 A). - **GNSS & IMU:** Integrated u-blox M8 GNSS (GPS/GLONASS), 3-axis gyroscope, accelerometer, and magnetometer. - **Audio Output:** Line-out R/L, optional earphone jack, supports MP3/WAV. - **Power Supply:** 9–60 VDC input, typical 230 mA @ 12 VDC (

Manufacturer: Artila

Category: IoT Gateway

- **Processor:** NXP i.MX6ULL Cortex-A7 MPCore, up to 800 MHz - **Operating System:** Linux kernel 4.14.x with U-Boot bootloader and EXT4/EXT3/EXT2/VFAT/NFS file system support - **Memory:** 512 MB DDR3/LPDDR3 SDRAM and 16 MB DataFlash for system backup - **Storage Options:** Boot from eMMC or microSD card (SDHC up to 128 GB) - **Networking:** Dual 10/100 Mbps Ethernet ports (RJ45 with LED indicators) - **Serial Communication:** One RS-232/RS-485 port with automatic hardware direction control - **USB Interface:** One USB 2.0 OTG port (microUSB connector) - **Digital I/O:** Two isolated digital inputs (2500 Vrms isolation) and two solid-state relay outputs (80 VDC @ 1.5 A) - **Expansion:** One full-size miniPCIe slot, one micro-SIM socket, and two reserved SMA antenna holes - **Power Supply:** 9–48 VDC input, typical consumption 250 mA @ 12 VDC - **Operating Temperature:** 0°C to 70°C - **Mounting Options:** Wall mount or DIN-rail (optional kit) - **Certifications:** CE Class A, FCC Class A - **Software Development:** GCC 6.2.x + glibc 2.24 toolchain, supports in-place C/C++ compilation - **Package Management:** Artila-maintained repository with apt-get support - **Pre-installed Software:** Apache/Nginx/Lighttpd, MySQL/SQLite3/PostgreSQL, PHP/Python/Perl/NodeJS, Webmin

Manufacturer: Artila

Category: IoT Gateway

NXP i.MX6ULL Cortex A7 800MHz based Industrial Low-Power Computer,Linux kernel 4.14.x and file system, Supports bootup from eMMC or SD card, 512MB LPDDR3 SDRAM and 16 MB for system backup, 1* RS485 RS232, 2*DI (isolated 2500 Vrms), 1* USB 2.0 host ports, 2* 10/100Mb Ethernet ports, 1* microSD slot (SDHC support), 1* miniPCIe full size slot, 1* micro-SIM card socket, 9..48VDC power input (power consumption 250mA@12VDC typical), 0°...70°C operation temperature, 78*108*35, Artila

Manufacturer: Artila

Category: IoT Gateway

- **Processor:** ARM926EJ-S ARM Thumb Processor (Atmel AT91SAM9G20) operating at 400 MHz with integrated MMU. - **Memory:** 64 MB SDRAM and 128 MB NAND Flash (expandable via SD card). - **Storage:** Onboard NAND Flash stores bootloader, Linux kernel, root filesystem, and user data. - **Networking:** Two independent 10/100 Mbps Ethernet ports (LAN1 and LAN2) with Link/Activity LEDs. - **Serial Communication:** - 4 serial ports total: - Ports 1–2: Software-selectable RS-232 or isolated RS-485. - Ports 3–4: RS-232 with hardware flow control. - Port 2 supports full modem control (DSR, DCD, DTR). - **USB Connectivity:** - Two USB 2.0 full-speed (12 Mbps) host ports. - One USB device port. - **Expansion:** MicroSD card slot for additional storage. - **Operating System:** Pre-installed Linux kernel 2.6.x with BusyBox utilities and Artila’s software suite. - **Power Input:** 9 – 40 V DC with surge and polarity protection. - **Mounting:** DIN-rail mountable design for industrial environments. - **Security:** Supports SSL and SSH (v1.0/2.0) for secure remote access. - **Web Server:** Integrated Apache2 or Lighttpd web server for remote management and web-based applications. - **Software Development:** - GNU toolchain for Linux and Windows (gcc 4.3.3, glibc 2.8/2.9, binutils 2.18/2.19). - Supports cross-compilation and remote deployment. - **Utility Software:** Includes Artila utilities (update, setuart, setconsole, gpioctl, version) and package management via `ipkg`. - **Recovery System:** Built-in DataFlash recovery mode for system restoration and firmware updates.

Manufacturer: Artila

Category: Automation Controller

- **Processor:** ARM926EJ‑S ARM Thumb Processor, 400 MHz with Memory Management Unit (MMU) - **Memory:** 64 MB SDRAM and 128 MB NAND Flash (expandable via SD card) - **Operating System:** Pre‑installed Linux Kernel 2.6.x with full GNU C/C++ toolchain support - **Networking:** Dual 10/100 Mbps Ethernet ports (LAN 1 and LAN 2) - **USB Connectivity:** Two USB 2.0 full‑speed (12 Mbps) host ports and one USB device port - **Serial Communication:** Four serial ports (2 × RS‑232/RS‑485 software‑selectable, 2 × RS‑232 with hardware flow control) - **Digital I/O:** - 8 × isolated digital inputs (2500 Vrms isolation, bipolar, 5–24 V logic high) - 8 × isolated Darlington digital outputs (2500 Vrms isolation, 5–50 V source, 500 mA max per channel) - **Storage Expansion:** Micro SD/MMC card interface - **Power Input:** 9 – 40 V DC with surge and polarity protection - **Mounting:** DIN‑rail ready with included bracket - **Security & Networking:** Supports SSL, SSH 1.0/2.0, FTP, Telnet, and web server (Apache2 or Lighttpd) - **Software Utilities:** BusyBox, ipkg package manager, Artila utilities (setuart, setconsole, gpioctl, update, version) - **Toolchain Support:** Cross‑compilation toolchains for Linux and Windows (GNU gcc 4.3.3, glibc 2.8/2.9, binutils 2.18/2.19) - **Maintenance & Recovery:** Built‑in DataFlash recovery system, bootloader (uBoot), and system recovery console

Manufacturer: Artila

Category: Automation Controller

- **Processor:** ARM926EJ‑S ARM Thumb Processor (Atmel AT91SAM9G20) running at 400 MHz with integrated MMU. - **Memory:** 64 MB SDRAM and 128 MB NAND Flash (expandable via SD card). - **Storage:** Onboard NAND Flash for OS and user data; SD/MMC slot for removable storage. - **Networking:** Two independent 10/100 Mbps Ethernet ports (LAN 1 and LAN 2). - **Serial Communication:** - 4 serial ports total: - Port 1–2: software‑selectable RS‑232 or isolated RS‑485. - Port 3–4: RS‑232 with hardware flow control. - Full modem control (DSR, DCD, DTR) supported on Port 2. - **USB Connectivity:** - Two USB 2.0 full‑speed (12 Mbps) host ports. - One USB device port for PC connection or firmware update. - **Digital I/O:** - 8 isolated digital inputs (photo‑coupler, 2500 Vrms isolation). - 8 isolated digital outputs (Darlington transistor drivers, 2500 Vrms isolation, 500 mA max per channel). - **Power Supply:** 9 – 40 V DC input with surge and polarity protection. - **Operating System:** Pre‑installed Linux 2.6 with BusyBox utilities and Artila software suite. - **Mounting:** DIN‑rail ready, compact form factor for control cabinets. - **Security:** Supports SSL, SSH 1.0/2.0, and secure remote access. - **Development Environment:** GNU C/C++ toolchain for Linux and Windows (cross‑compilation supported). - **Wide Temperature Range:** ‑20 °C to +80 °C for industrial environments. - **Fanless Design:** Ensures silent operation and long‑term reliability.

Manufacturer: Artila

Category: Automation Controller

- **High‑Performance ARM9 Core:** Equipped with an ARM926EJ‑S processor running at 400 MHz, featuring 32 KB instruction and 32 KB data cache, and a memory management unit (MMU) for multitasking Linux operation. - **Embedded Linux Platform:** Pre‑installed Linux kernel 2.6.x with full GNU C/C++ toolchain support for both Linux and Windows development environments. Includes BusyBox utilities and Artila’s custom management tools. - **Comprehensive I/O Suite:** - 4 × 16‑bit isolated analog input channels (configurable voltage/current ranges) - 4 × isolated digital inputs (2.5 kV isolation) - 4 × isolated digital outputs (Darlington transistor drivers, 500 mA max per channel) - **Networking & Communication:** - Dual 10/100 Base‑T Ethernet ports - 2 × USB 2.0 full‑speed host ports and 1 × USB device port - 4 × serial ports (2 × RS‑232, 2 × software‑selectable RS‑232/RS‑485 isolated) - **Storage & Expansion:** - 64 MB SDRAM and 128 MB NAND Flash (expandable via microSD slot) - 1 × SD/MMC interface for removable storage - USB flash disk and external storage mounting supported - **Industrial‑Grade Design:** - Fanless, solid‑state architecture - 9 – 40 V DC power input with surge and polarity protection - Operating temperature: 0 °C – 70 °C - DIN‑rail mountable aluminum enclosure - **Integrated Web & Network Services:** Built‑in Apache web server, SSH/SFTP, FTP, Telnet, and syslog services for remote management and data access. - **Security & Remote Access:** Supports SSL, SSH 1.0/2.0, and user authentication for secure remote operation.

Manufacturer: Artila

Category: Automation Controller

- **ARM9 Industrial Computing Platform:** Powered by an Atmel AT91RM9200 ARM920T processor running at 180 MHz (200 MIPS) with integrated MMU, 16 KB instruction cache, and 16 KB data cache. - **Pre-installed Linux OS:** Ships with Linux kernel 2.6.x, U-Boot 1.1.2 bootloader, and a full file system supporting JFFS2, EXT2/EXT3, VFAT/FAT, and NFS. - **Rich I/O Interfaces:** Includes 16 opto-isolated digital inputs (2.5 kV isolation) and 8 Darlington-pair digital outputs (500 mA max per channel, 5–50 VDC source voltage). - **Networking and Connectivity:** Dual 10/100 Mbps Ethernet ports (RJ-45), one RS-232 port with full modem control, one RS-485 port with hardware direction control, and two USB 2.0 host ports (12 Mbps). - **Expandable Storage:** One internal SD 1.0-compliant socket supporting up to 4 GB SD cards for data logging and application storage. - **Web and Network Services:** Integrated web server (Boa), FTP, Telnet, SSH, SNMP, and firewall (iptables) for remote monitoring and control. - **Open Development Environment:** Includes GNU C/C++ cross-compilation toolchain for Linux and Windows (CygWin), POSIX libraries, and BusyBox utilities. - **Industrial Design:** Fanless, DIN-rail mountable, wide 9–40 VDC power input, 0–70 °C operating temperature, CE/FCC Class A compliance. - **Security and Management:** Supports SSL, SSH 1.0/2.0, and user-level access control. Includes watchdog timer, real-time clock, and buzzer for system monitoring.

Manufacturer: Artila

Category: Automation Controller

- **Embedded Linux Platform:** Pre-installed Linux 2.6.x kernel with full file system support (JFFS2, EXT2/3, VFAT/FAT, NFS). Provides a standard POSIX environment for application development and deployment. - **ARM9 Processor Architecture:** Powered by an Atmel AT91RM9200 ARM920T CPU running at 180 MHz (200 MIPS performance) with integrated MMU, 16 KB instruction cache, and 16 KB data cache. - **Industrial-Grade I/O:** - 16 opto-isolated digital input channels (2.5 kV isolation). - 8 Darlington-pair digital output channels (UDN2981A driver, 500 mA max per channel, 5–50 VDC source voltage). - Each I/O channel includes LED status indicators. - **Networking & Connectivity:** - Dual 10/100 Mbps Ethernet ports (RJ-45). - One RS-232 port with full modem control. - One RS-485 port with hardware direction control. - One serial console port for configuration and debugging. - Two USB 2.0 full-speed host ports (12 Mbps) for peripheral expansion (Wi-Fi, flash drives, RS-232 adaptors). - One SD memory card slot (SD 1.0 compliant, up to 4 GB). - **Web-Ready & Remote Management:** Integrated Boa web server for remote monitoring and control. Supports SSH, SSL, SNMP, FTP, and Telnet for secure and flexible network management. - **Open Development Environment:** Includes GNU C/C++ cross-compilation toolchain for Linux and Windows (CygWin). Supports user-developed applications using standard Linux APIs. - **Rugged Industrial Design:** Fanless, DIN-rail mountable, wide operating voltage (9–40 VDC), and extended temperature range (-20 °C to +80 °C). - **Comprehensive Software Stack:** Includes BusyBox utilities, SNMP agent, Telnet/FTP servers, SSH daemon, firewall (iptables), and Artila management tools.

Manufacturer: Artila

Category: Automation Controller

- **Processor & Architecture:** ARM920T core (Atmel AT91RM9200) running at 180 MHz, delivering approximately 200 MIPS performance with integrated Memory Management Unit (MMU), 16 KB instruction cache, and 16 KB data cache. - **Operating System:** Pre‑installed Linux kernel 2.6.14 with JFFS2, EXT2/EXT3, VFAT/FAT, and NFS file system support. Includes U‑Boot 1.1.2 bootloader. - **Memory:** 64 MB SDRAM and 16 MB NOR Flash memory, expandable via SD card slot (SD 1.0 compliant). - **Networking:** Dual 10/100 Base‑T Ethernet ports (RJ‑45) with independent MAC addresses, supporting IPv4, DHCP, NTP, SNMP, SSL, SSH, and other standard protocols. - **I/O Interfaces:** - 4 × 16‑bit high‑precision isolated analog inputs (±150 mV … ±10 V, 0–20 mA) - 8 × optically isolated digital inputs (2.5 kVrms isolation) - 8 × high‑drive digital outputs (500 mA max per channel, 5–50 VDC source) - 1 × RS‑232 port (full modem control) - 1 × RS‑485 port (data + / data –) - 1 × RS‑232 console port (10‑pin header) - 2 × USB 2.0 host ports (12 Mbps full‑speed) - **Storage & Expansion:** SD memory card slot for data logging or program storage; USB host ports support flash disks, Wi‑Fi adapters, and RS‑232 adapters. - **Power Supply:** Wide input range 9 – 40 VDC with surge and polarity protection; typical consumption 800 mA @ 12 VDC. - **Environmental:** Operating temperature 0 – 70 °C; fanless design for industrial reliability. - **Software Development:** Includes GNU C/C++ cross‑compiler toolchain for Linux and Windows (Cygwin), with POSIX‑compliant GLIBC library. - **Security & Connectivity:** Supports SSL, SSH 1.0/2.0, firewall (iptables), and remote management via Telnet, FTP, HTTP, and SNMP. - **Mounting:** Ready for DIN‑rail installation; compact PCB form factor for control cabinets.

Manufacturer: Artila

Category: Automation Controller

- **Dual Modbus Protocol Support:** Operates as a remote I/O device via **Modbus/TCP over Ethernet** or **Modbus RTU/ASCII over RS-485**, ensuring compatibility with a wide range of PLCs, SCADA systems, and industrial controllers. - **High Isolation Protection:** Both digital inputs and RS-485 interface are protected with **2500 Vrms isolation**, ensuring reliable operation in electrically noisy environments. - **Flexible Relay Outputs:** Eight relay output channels configurable as **Form A (Normally Open)** or **Form B (Normally Closed)** via onboard jumpers (JP5–JP12). - **Web-Based I/O Control:** Integrated HTTP server with AJAX-enabled demo pages allows real-time monitoring and control through a standard web browser. - **Comprehensive Communication Interfaces:** - 1× 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation - 1× isolated RS-485 port (2500 Vrms) - 1× RS-232 console port for configuration - 3× Maxim 1-Wire interfaces for sensor integration (e.g., DS18B20 temperature sensors) - **Industrial-Grade Design:** Compact metal enclosure with **DIN-rail mounting**, wide **9–48 VDC power input**, and **0–70 °C operating temperature range**. - **User-Friendly Configuration:** Windows-based utility for broadcast search, configuration, and web page conversion. - **Customizable Web Interface:** Users can upload custom HTML pages converted to binary (.anf) format for tailored control dashboards. - **LED Indicators:** Comprehensive LED status indicators for power, readiness, LAN activity, digital input/output states, and serial communication. - **Integration with IoT Platforms:** Compatible with **Node-RED** for graphical IoT flow programming, enabling integration with cloud services via RESTful APIs or MQTT.

Manufacturer: Artila

Category: Automation Controller

- **Dual Modbus Protocol Support:** Operates as a remote I/O device using **Modbus/TCP** over Ethernet or **Modbus RTU/ASCII** over RS-485. - **High Isolation Protection:** 2500 Vrms isolation for both digital inputs and RS-485 interface ensures reliable operation in electrically noisy environments. - **16 Opto-Isolated Digital Inputs:** Accepts logic high levels from 5 VDC to 24 VDC and logic low from 0 VDC to 1.5 VDC, with LED indicators for each channel. - **8 Relay Outputs:** Each relay channel supports **30 VDC @ 1 A** or **125 VAC @ 0.5 A**, configurable as **Normally Open (NO)** or **Normally Closed (NC)** via jumpers. - **Integrated 1-Wire Interface:** Three 1-Wire channels for connecting Maxim/Dallas Semiconductor sensors such as DS18B20 temperature sensors. - **Web-Based I/O Control:** Built-in HTTP server with AJAX-enabled demo page for real-time monitoring and control via browser. - **Windows Configuration Utility:** Simplifies device discovery, configuration, and web page upload through a graphical interface. - **DIN-Rail Mounting:** Industrial-grade mechanical design for easy installation in control cabinets. - **Wide Power Input Range:** Operates from **9 VDC to 48 VDC**, suitable for diverse industrial power systems. - **Bluemix and Node-RED Ready:** Compatible with IBM Bluemix and Node-RED for IoT data flow management and cloud integration. - **Compact and Rugged Design:** 182 × 118 × 35.82 mm enclosure with operating temperature range from 0 °C to 70 °C.

Manufacturer: Artila

Category: Automation Controller

- **High-Performance MCU:** Equipped with an **NXP LPC1768 ARM Cortex-M3 CPU** running at **100 MHz**, providing robust processing power for real-time control and communication tasks. - **Integrated Memory:** Includes **512 KB on-chip Flash memory** and **64 KB SRAM**, suitable for embedded applications and user-developed firmware. - **Comprehensive I/O Capabilities:** - **16 opto-isolated digital inputs** (2500 Vrms isolation) for reliable signal acquisition in noisy industrial environments. - **8 relay outputs** rated at **30 VDC @ 1A** or **125 VAC @ 0.5A**, configurable as **Normally Open (NO)** or **Normally Closed (NC)** via onboard jumpers. - **Multiple Communication Interfaces:** - **1 x 10/100 Mbps Ethernet port** with **1.5 kV magnetic isolation** for network connectivity. - **1 x RS-232 full modem port** and **1 x isolated RS-485 port (2500 Vrms)** for serial communication. - **1 x RS-232 console port** for configuration and debugging. - **Network and Software Support:** - Supports **lwIP** (lightweight IP stack) and **BSD socket library** for TCP/IP networking. - Built-in **tiny web server** for remote configuration and monitoring. - **Windows configuration utility** for device setup and firmware management. - Compatible with **Sourcery CodeBench Lite** and **Keil ARM toolchains** for software development. - **Flexible Power Input:** Operates from **9–48 VDC**, supporting both power jack and terminal block connections. - **Industrial-Grade Design:** DIN-rail mountable aluminum enclosure, wide operating temperature range (**0–70°C**), and robust electrical isolation for industrial reliability. - **1-Wire Interface:** Three 3-pin terminal connectors supporting **Maxim 1-Wire** devices for temperature or sensor integration.

Manufacturer: Artila

Category: Automation Controller

- **High-performance ARM Cortex-M4 CPU:** Powered by the Atmel SAM4E16E SoC running at 120 MHz, providing robust processing for real-time control and data acquisition tasks. - **Integrated FreeRTOS environment:** Enables deterministic multitasking and real-time performance for embedded applications. - **Comprehensive I/O capabilities:** - 4 × 16-bit isolated analog input channels (voltage or current mode) - 4 × opto-isolated digital inputs (2500 Vrms isolation) - 2 × relay outputs (30 VDC @ 1 A or 125 VAC @ 0.5 A) - 2 × Maxim 1‑Wire interfaces for digital sensors - **Multiple communication interfaces:** - 1 × 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation - 1 × isolated RS‑485 port (1500 Vrms) - 1 × RS‑232 serial console port - **Embedded web server and networking stack:** Supports lwIP and BSD socket libraries, enabling TCP/IP communication and web-based configuration. - **Flexible power input:** Operates from 9 VDC to 48 VDC, suitable for industrial power systems. - **DIN‑rail mountable design:** Compact and rugged enclosure for control cabinet installation. - **Windows configuration utility:** Simplifies device discovery, configuration, and firmware upgrades. - **Toolchain support:** Compatible with Atmel Studio, Sourcery CodeBench Lite, and Keil ARM toolchains. - **Expandable storage:** Onboard microSD socket for data logging and firmware storage. - **High isolation protection:** Analog, digital, and communication ports are isolated to prevent ground loops and electrical interference.

Manufacturer: Artila

Category: Automation Controller

- **High-Performance MCU:** Powered by an Atmel SAM4E16E Cortex-M4 SoC (120 MHz) with integrated 128 KB SRAM and 1 MB Flash, plus an additional 128 KB SRAM and 2 MB SPI Flash expansion. - **Comprehensive I/O Capability:** - 4 × 16-bit isolated analog inputs (AI) - 2 × 16-bit isolated analog outputs (AO) - 4 × opto-isolated digital inputs (DI) - 2 × relay outputs (DO) - 1 × Maxim 1-Wire interface for digital sensors - **Industrial-Grade Isolation:** - 1500 Vrms isolation for analog I/O - 2500 Vrms isolation for digital inputs and RS-485 interface - **Flexible Communication Interfaces:** - 10/100 Mbps Ethernet (RJ45, 1.5 kV magnetic isolation) - RS-232 and isolated RS-485 serial ports - microSD card slot for data logging and configuration storage - **Web-Based Control and Monitoring:** Integrated web server supporting AJAX-based remote configuration and monitoring. - **Cross-Platform Development Support:** C/C++ API available for Windows and Linux; compatible with Sourcery CodeBench Lite and Keil ARM toolchains. - **IoT Integration:** Supports Modbus, MQTT, and RESTful Web APIs for cloud connectivity and data exchange with PLCs or IoT gateways. - **DIN-Rail Mounting:** Compact industrial form factor for easy installation in control cabinets. - **Wide Power Input Range:** 9 – 48 V DC input for flexible deployment in industrial environments.

Manufacturer: Artila

Category: Automation Controller

- **8 Isolated Analog Input Channels:** Each channel supports differential voltage or current input with 16-bit resolution and configurable ranges for both unipolar and bipolar signals. - **High Electrical Isolation:** 1500 VDC channel-to-system isolation ensures reliable operation in noisy industrial environments. - **Integrated Relay Output:** One relay output channel (Form A or Form B) with contact ratings of **30VDC @ 1A** or **125VAC @ 0.5A** for control or alarm signaling. - **Ethernet Connectivity:** One **10/100 Mbps RJ45 port** with 1.5 kV magnetic isolation, supporting **Modbus/TCP**, **UDP**, **HTTP**, and **DHCP** protocols. - **Web-Based Control and AJAX Interface:** Built-in web server enables browser-based monitoring and control using AJAX commands for real-time data access. - **Windows Configuration Utility:** A dedicated management tool for device discovery, configuration, and web page conversion. - **Flexible Power Input:** Operates from **9–48 VDC** with automatic polarity and surge protection. - **Compact Industrial Design:** Dimensions of **78 × 108 × 25 mm**, suitable for DIN-rail mounting (optional DK-35A kit). - **High Accuracy and Resolution:** ±1% FSR accuracy with 16-bit A/D conversion at 10 Hz sampling rate. - **Multiple Access Methods:** Supports Modbus/TCP, HTTP GET/POST, and direct API access for integration with Artila’s Matrix ARM/Linux platforms. - **Factory Default Configuration:** Preconfigured IP (192.168.2.127), Modbus port (502), and web server port (5003) for quick deployment. - **IoT Integration Ready:** Compatible with Node-RED and MQTT for cloud-based data acquisition and control.

Manufacturer: Artila

Category: Automation Controller

- **8 Isolated Analog Input Channels:** Each channel supports 16-bit resolution with configurable voltage or current input modes. - **High Electrical Isolation:** 2500 Vrms channel-to-channel and 1500 VDC isolation ensures robust protection against electrical interference. - **Relay Output:** One Form A or Form B relay output channel rated at 30 VDC @ 1 A or 125 VAC @ 0.5 A for control signaling. - **Ethernet Connectivity:** Integrated 10/100 Mbps RJ45 port with 1.5 kV magnetic isolation for reliable network communication. - **Protocol Support:** Modbus/TCP, UDP, HTTP, and DHCP for flexible integration with PLCs, SCADA, and IoT gateways. - **Web-Based I/O Control:** Built-in AJAX-enabled web server allows real-time monitoring and control via standard browsers. - **Windows Configuration Utility:** Simplifies device discovery, configuration, and firmware management. - **DIN-Rail Mounting:** Compact form factor with optional DK-35A DIN-rail mounting kit for industrial panel installations. - **Wide Power Input Range:** Operates from 9 VDC to 48 VDC with surge and polarity protection. - **Bluemix and Node-RED Ready:** Compatible with IBM Bluemix and Node-RED for rapid IoT application development.

Manufacturer: Artila

Category: Automation Controller

- **C Programmable Remote I/O Module:** Allows users to develop custom firmware using C language for flexible control and data processing. - **8 Isolated Analog Input Channels:** Each channel supports differential input with 16-bit resolution and 2500VDC isolation for high-accuracy signal acquisition. - **Wide Input Range:** Configurable for unipolar, bipolar, and current input modes: - Unipolar: 0–150mV, 0–500mV, 0–1V, 0–5V, 0–10V - Bipolar: ±150mV, ±500mV, ±1V, ±5V, ±10V - Current: 0–20mA - **Relay Output:** One channel, Form A or Form B, rated at 30VDC@1A or 125VAC@0.5A. - **Ethernet Connectivity:** 10/100Mbps RJ45 port with 1.5KV magnetic isolation for reliable network communication. - **Web-Based Control:** Integrated tiny web server for remote configuration, monitoring, and control via browser. - **Software Stack:** Supports lwIP, BSD socket library, and standard TCP/IP protocols (IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, HTTP). - **Windows Configuration Utility:** Simplifies device setup, firmware updates, and network configuration. - **Industrial-Grade Design:** DIN-rail mountable, wide power input range (9–48VDC), and surge/polarity protection. - **Toolchain Compatibility:** Supports Sourcery CodeBench Lite and Keil ARM development environments. - **IoT Integration:** Compatible with Node-RED for graphical flow-based programming and cloud connectivity via MQTT and RESTful APIs.

Manufacturer: Artila

Category: Automation Controller

- **Three Thermocouple Inputs:** Supports J and K type thermocouples using Maxim MAX31855 converters with built-in cold junction compensation for precise temperature measurement. - **High Resolution and Accuracy:** 14-bit resolution with 0.25°C measurement precision ensures reliable thermal data acquisition. - **Integrated Web Server:** Built-in web interface with AJAX support for real-time temperature monitoring and digital I/O control via standard browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for seamless integration with PLCs, SCADA systems, and industrial controllers. - **Digital and Relay I/O:** Includes two isolated digital inputs (2500 Vrms isolation) and one Form C relay output (30VDC@1A or 125VAC@0.5A). - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with built-in surge and polarity protection. - **Compact Industrial Design:** 78 × 108 × 25 mm enclosure suitable for DIN-rail mounting (optional DK-35A kit). - **Software Utility:** Windows-based configuration and management utility for network discovery, setup, and firmware updates. - **Web-Based Configuration:** Supports AJAX commands for reading/writing I/O data and configuring thermocouple channels. - **Thermocouple Fault Detection:** Detects open, short-to-ground, and short-to-VCC conditions for enhanced reliability. - **Cross-Platform Integration:** Compatible with Artila’s IoT gateways and Node-RED for cloud connectivity and visual flow programming.

Manufacturer: Artila

Category: Automation Controller

- **Remote Thermocouple Input Module:** Supports 3 channels of J or K type thermocouples with cold junction compensation for accurate temperature measurement. - **High-Resolution Measurement:** 14-bit resolution with 0.25°C accuracy, ensuring precise thermal data acquisition. - **Integrated Web Server:** Built-in web interface supporting AJAX for real-time monitoring and control via standard web browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for integration with PLCs, SCADA systems, and industrial automation networks. - **Digital I/O Capabilities:** Two isolated digital inputs (2500 Vrms isolation) and one Form C relay output for control and alarm signaling. - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with surge and polarity protection. - **Compact DIN-Rail Mountable Design:** Optional DK-35A DIN-rail mounting kit for easy installation in control panels. - **Windows Configuration Utility:** Simplifies setup, configuration, and firmware management. - **Bluemix and IoT Gateway Ready:** Compatible with IBM Bluemix and Node-RED for cloud integration and IoT data flow management. - **Thermocouple Fault Detection:** Built-in detection for open, short-to-ground, and short-to-VCC conditions. - **Web-Based Configuration and Control:** Supports AJAX commands for fetching values, setting relay outputs, and configuring thermocouple channels.

Manufacturer: Artila

Category: Automation Controller

- **ARM9 RISC Processor:** Atmel AT91RM9200 ARM920T core running at 180MHz with integrated Memory Management Unit (MMU), delivering up to 200 MIPS performance. - **Linux-Ready Platform:** Pre-installed Linux kernel 2.6.14 with U-Boot 1.1.2 bootloader and full file system support (JFFS2, EXT2/3, VFAT/FAT, NFS). - **Memory Architecture:** 64MB SDRAM and 16MB NOR Flash (expandable to 32/64MB Flash options). - **Networking:** Integrated 10/100Mbps Ethernet interface with DAVICOM DM9161 PHY and 1.5KV magnetic isolation. - **USB Connectivity:** Two USB 2.0 full-speed (12Mbps) host ports for peripheral expansion (WiFi, flash drives, modems, serial adapters). - **Serial Communication:** Four UARTs supporting RS-232/422/485 modes, up to 921.6Kbps, with hardware flow control and 9-bit multi-drop mode on COM1. - **Digital I/O:** 32 programmable GPIOs (3.3V CMOS compatible) with interrupt capability. - **External Bus Interface:** 8-bit data and address bus with four chip selects for external peripheral expansion. - **Storage Expansion:** SD/MMC interface compliant with SD 1.0 specification, supporting up to 4GB SD cards. - **Low Power Design:** Typical consumption under 2.5W at 3.3VDC input. - **Industrial Reliability:** Fanless, flash-based architecture for 24/7 operation; operating temperature 0–70°C (M-501) or -20–80°C (M-501T). - **Development Support:** Includes GNU C/C++ cross-compilation toolchain for Linux and Windows (Cygwin environment). - **Compact Form Factor:** 80mm x 50mm SoM with 2.0mm pitch connectors for easy integration into OEM designs.

Manufacturer: Artila

Category: SBC Modules

- **ARM9-based Industrial Computer:** Powered by the ATMEL AT91RM9200 CPU running at 180 MHz with integrated Memory Management Unit (MMU). - **Linux-ready Platform:** Preloaded with Linux kernel 2.6.14, U-Boot 1.1.2 bootloader, and multiple file systems (JFFS2, EXT2, VFAT/FAT, NFS). - **Comprehensive Development Environment:** Includes GNU C/C++ cross-compilation toolchain and POSIX-compliant GLIBC library for application development on Linux or Windows hosts. - **Integrated Networking:** 10/100 Mbps Ethernet interface with DAVICOM DM9161 PHY and 1.5 kV magnetic isolation for industrial reliability. - **Multiple Serial Interfaces:** Four high-speed UARTs (up to 921.6 Kbps), one configurable as RS-232/422/485 with hardware auto-direction control and 9-bit multi-drop mode. - **USB Connectivity:** Two USB 2.0 full-speed host ports (12 Mbps) supporting flash drives, Wi-Fi adapters, Ethernet adapters, and serial converters. - **Expandable Storage:** One SD card interface (SD 1.0 standard, up to 2 GB non-SDHC). - **Rich I/O Options:** 32 programmable GPIO channels, I2C, SPI, I2S, and local bus interfaces for peripheral expansion. - **Low Power, Fanless Design:** Consumes less than 2.5 W, ideal for embedded and industrial environments. - **Wide Operating Range:** Supports 9–48 VDC input, 300 mA @ 12 VDC, and operates from -10°C to +60°C (standard kit) or -20°C to +80°C (M-501T wide-temperature version). - **Compact Form Factor:** SoM dimensions 80 × 50 mm; carrier board 150 × 100 mm. - **Preloaded Network Services:** SSH, FTP, Telnet, web server (lighttpd), and system daemons for remote management. - **Industrial-grade Reliability:** Flash-based architecture, watchdog timer, and hardware-level protection for stable long-term operation.

Manufacturer: Artila

Category: SBC Modules

- **Processor:** ATMEL AT91RM9200 ARM920T CPU, 180 MHz, with Memory Management Unit (MMU) - **Operating System:** Pre-installed Linux kernel 2.6.14 with JFFS2/EXT2/VFAT/NFS file systems - **Memory:** 64 MB SDRAM and 16 MB NOR Flash (Intel StrataFlash or equivalent) - **Networking:** 10/100 Mbps Ethernet with DAVICOM DM9161 PHY and 1.5 kV magnetic isolation - **USB:** Two USB 2.0 full-speed (12 Mbps) host ports - **Serial Interfaces:** Four UARTs (up to 921.6 Kbps) with hardware flow control; COM1 configurable as RS-232/422/485 - **Storage Expansion:** SD (Secure Digital) interface compliant with SD 1.0 specification - **Peripheral Interfaces:** I²C, I²S, SPI, external 8-bit data/address bus, and 32 programmable GPIOs - **Power Efficiency:** Ultra-low power consumption (

Manufacturer: Artila

Category: SBC Modules

- **ARM9 Architecture:** Powered by the Atmel AT91RM9200 ARM920T processor running at 180 MHz, delivering approximately 200 MIPS performance with integrated Memory Management Unit (MMU). - **Linux-Ready Platform:** Pre-installed Linux kernel 2.6.x with U-Boot 1.1.2 bootloader and full GNU C/C++ toolchain support for both Linux and Windows development environments. - **Low Power Operation:** Consumes less than 3 Watts, ideal for energy-sensitive or battery-powered embedded systems. - **Industrial-Grade Design:** M-508T variant supports -20°C to +80°C operation range and includes 512KB non-volatile SRAM for data retention during power loss. - **Comprehensive Connectivity:** - One 10/100 Mbps Ethernet port with 1.5KV magnetic isolation. - Four RS-232/485 serial ports (Port 4 also supports RS-422). - Two USB 2.0 full-speed host ports (12 Mbps). - One SD 1.0 compliant memory card slot for storage expansion. - 32 CMOS-level GPIO channels, individually programmable as input or output. - **Integrated Peripherals:** Real-Time Clock (RTC), Watchdog Timer, Buzzer, and system status LEDs (Power, Ready, LAN, Serial Activity, Debug). - **Compact Form Factor:** 105 mm x 75 mm PCB with 5VDC single power input. - **Software Stack:** Includes TCP/IP networking, SSH, SSL, SNMP, FTP, Telnet, HTTP, and firewall utilities. - **Development Support:** Ships with Artila CD containing GNU toolchain, user guide, and example programs.

Manufacturer: Artila

Category: SBC Modules