Industrial Managed 16*1000TX and 4*100FX Switch, multi-mode fiber ports for distances up to 2km, RS232 console port, fast redundant Ethernet ring (recovery time less than 30ms over 250 units), 9k6 jumbo frame support, alarm LED e-mail warning system log output, DIN-rail mounting, 96*106*154mm, dual DC power input 12..48VDC ~16W with overload and reverse polarity protection, extended -40°..75°C operating temperature, Oring

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Density Port Configuration:** 16 × 10/100/1000Base‑T(X) RJ‑45 ports (auto MDI/MDIX) and 4 × 100Base‑FX single‑mode SC fiber ports. - **Long‑Distance Fiber Connectivity:** Single‑mode fiber operation at 1310 nm wavelength, supporting transmission distances up to **30 km**. - **Industrial‑Grade Redundancy:** - **O‑Ring** proprietary redundancy with

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Density Port Configuration:** 16 × 10/100/1000Base‑T(X) RJ‑45 ports with auto MDI/MDI‑X and 4 × 1000Base‑SX multi‑mode fiber ports (SC connectors, 850 nm, 550 m typical distance). - **Industrial Redundancy Technologies:** - **O‑Ring:** Proprietary ORing redundancy with recovery

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Port Density:** 20 total ports — 16 × 10/100/1000Base‑T(X) RJ‑45 and 4 × 1000Base‑LX single‑mode fiber ports (SC connectors). - **Long‑Distance Fiber Connectivity:** Single‑mode fiber links up to 10 km at 1310 nm wavelength. - **Redundant Ethernet Technologies:** - **O‑Ring** proprietary redundancy (

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Performance Switching:** 24‑port Gigabit architecture with 48 Gbps switching bandwidth and 7 µs latency. Store‑and‑forward processing with 8 K MAC address table and 8 hardware priority queues. - **Redundant Networking:** - **O‑Ring** proprietary redundancy with

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Port Configuration:** 8×10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) and 12×100/1000Base‑X SFP slots. - **Redundancy:** - ORing proprietary O‑Ring redundancy (

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

Industrial Managed 8*1000TX and 4*SFP1000 and 4*1000FX Switch, multi-mode fiber ports for distances up to 10m, RS232 console port, fast redundant Ethernet ring (recovery time less than 30ms over 250 units), 9k6 jumbo frame support, alarm LED e-mail warning system log output, DIN-rail mounting, 96*106*154mm, dual DC power input 12..48VDC ~15W with overload and reverse polarity protection, extended -40°..70°C operating temperature, Oring

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Port Configuration:** - 8 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) - 4 × 100/1000Base‑X SFP slots - 4 × 1000Base‑X single‑mode fiber ports (SC connectors) - **High‑Speed Switching:** - 40 Gbps switching bandwidth - 7 µs latency (store‑and‑forward architecture) - 8 K MAC address table, 8 priority queues, 10 KB jumbo frame support - **Redundancy & Reliability:** - ORing proprietary **O‑Ring** redundancy (recovery

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Port Configuration:** - 8 × 10/100/1000Base-T(X) RJ-45 ports (auto MDI/MDI-X) - 4 × 100/1000Base-X SFP slots - 4 × 100Base-FX multi-mode fiber ports (SC connectors, up to 550 m) - 1 × RS-232 console port (RJ-45 interface) - **Network Redundancy:** - Proprietary **O-Ring** technology with recovery time

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Port Configuration:** - 8 × 10/100/1000Base‑T(X) RJ‑45 copper ports (auto MDI/MDI‑X) - 4 × 100/1000Base‑X SFP slots - 4 × 100Base‑FX single‑mode fiber ports (SC connectors, up to 2 km) - 1 × RS‑232 console port (RJ‑45 interface) - **Redundancy & Reliability:** - ORing proprietary **O‑Ring** technology with recovery time

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Layer‑3 Routing:** Supports static and RIP routing for efficient inter‑VLAN and inter‑subnet communication. - **High Port Density:** 20 total ports (8 RJ45 + 12 SFP) for flexible copper and fiber connectivity. - **Redundant Network Technologies:** - **O‑Ring** proprietary redundancy with

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Four 100Base‑FX Multi‑Mode Fiber Ports:** Each port supports SC‑type connectors for multi‑mode fiber operation, providing reliable optical communication over distances up to 2 km (typical for 850 nm multi‑mode fiber). - **Modular Integration:** Designed for installation into the RGS‑9000 chassis, occupying one of the available interface slots. The modular design allows flexible combinations of copper, fiber, and 10 Gbit/s uplink modules. - **Industrial‑Grade Design:** Fully compliant with **IEC 61850‑3** and **IEEE 1613** standards for power substation and railway environments, ensuring electromagnetic immunity, vibration resistance, and extended temperature operation. - **High Network Reliability:** Supports ORing’s proprietary **O‑Ring** redundancy protocol with recovery times under **30 ms** across up to 250 nodes, as well as **MSTP**, **MRP**, and **O‑Chain** topologies for multi‑ring redundancy. - **Comprehensive Management:** Managed through the RGS‑9000’s web interface, CLI, Telnet, SNMP v1/v2c/v3, or ORing’s **Open‑Vision** centralized management software. - **Enhanced Security:** Supports HTTPS, SSH, RADIUS, TACACS+, 802.1X authentication, ACLs, and device binding for secure network access control. - **Energy‑Efficient Operation:** Incorporates IEEE 802.3az Energy‑Efficient Ethernet technology to reduce power consumption during low network activity. - **Wide Temperature Range:** Operates reliably from **‑40 °C to +85 °C** (depending on chassis configuration) for deployment in extreme industrial environments.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

The SWM‑04FX‑MM‑SC‑D provides 4 additional fiber‑optic Fast Ethernet ports to extend the capacity of compatible modular industrial switches. Key capabilities include: • Four 100Base‑FX multimode fiber ports with SC connectors for robust optical communication • Designed for use in ORing’s modular DIN‑rail managed switches, including the IGS‑9122GPM platform • Hot‑swappable installation without powering down the host switch • Industrial‑grade design suitable for harsh environments and mission‑critical applications • Seamless integration with host device features such as redundant ring protocols (O‑Ring, O‑Chain, MRP, MSTP), QoS, VLAN, and enhanced cybersecurity functions • Optimized for fiber‑based network extension over distances up to 2 km (multimode, 1310 nm) • Supports applications requiring high reliability, EMI immunity, and stable long‑distance optical connections • Part of a wide family of modular expansion options including copper, gigabit fiber, bypass, and M12‑connector modules

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Industrial‑Grade Fiber Expansion:** Adds four 100Base‑FX single‑mode fiber ports to the RGS‑9000 chassis for extended optical connectivity. - **Connector Type:** SC single‑mode fiber interfaces for long‑haul communication. - **High Immunity to EMI/RFI:** Optical transmission eliminates electrical interference, ideal for substations and rolling stock. - **Modular Integration:** Hot‑swappable module compatible with RGS‑9000 Series managed switches. - **Redundant Networking Support:** Fully compatible with ORing’s **O‑Ring**, **O‑Chain**, and **MRP (IEC 62439‑2)** redundancy protocols, ensuring recovery times under 30 ms across up to 250 nodes. - **Layer 2/3 Managed Switch Compatibility:** Works within RGS‑9000 and RGS‑PR9000 chassis supporting advanced routing, VLAN, QoS, and security features. - **Wide Temperature Operation:** −40 °C to +85 °C (when installed in chassis without 10 G module). - **High Reliability:** Designed to meet **IEC 61850‑3** and **IEEE 1613** standards for power automation and railway applications. - **Centralized Management:** Configurable via Web GUI, Telnet, CLI, or ORing’s Open‑Vision management suite. - **Energy‑Efficient Ethernet:** Supports IEEE 802.3az for reduced power consumption. - **Security Integration:** Works with switch‑level ACLs, 802.1x, RADIUS/TACACS+, HTTPS/SSH, and device binding.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **4-Port 100Base-FX Fiber Expansion:** Adds four single-mode fiber ports to compatible modular switches, supporting long-distance Ethernet communication up to 30 km at 1310 nm wavelength. - **Single-Mode Fiber (SS):** Optimized for long-haul industrial networking applications requiring extended reach and minimal signal loss. - **SC Connector Interface:** Standardized, robust optical connectors ensure secure and stable fiber connections in industrial environments. - **Hot-Swappable Design:** The module can be inserted or replaced without powering down the host switch, minimizing network downtime. - **Industrial-Grade Reliability:** Designed for rugged environments with high electromagnetic interference (EMI) resistance and wide temperature tolerance when installed in compatible ORing switches. - **Modular Integration:** Fully compatible with the **IGS-9122GPM** modular managed Ethernet switch, which supports up to three expansion modules for flexible port configuration. - **High MTBF (Mean Time Between Failures):** Ensures long operational life and reduced maintenance requirements. - **DIN-Rail Mounting Compatibility:** When installed in the IGS-9122GPM chassis, the module supports DIN-rail mounting for industrial control cabinets. - **Compliant with IEEE Ethernet Standards:** Fully supports IEEE 802.3u for 100Base-FX operation and integrates seamlessly into Ethernet-based automation systems.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **4×1G Combo Ports:** Each port supports both 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP interfaces, providing flexible connectivity for copper or fiber links. - **Hot-Swappable Design:** Enables module replacement or installation without powering down the main switch, ensuring continuous network operation. - **Industrial-Grade Construction:** Built for harsh environments with wide temperature tolerance and IP-30 rated metal enclosure. - **High Reliability:** Mean Time Between Failures (MTBF) of 3,948,727 hours ensures long-term operational stability. - **Modular Scalability:** Designed for use with the IGS-9122GPM’s three expansion slots, allowing flexible network scaling with various module types (Gigabit combo, fiber, or copper). - **Seamless Integration:** Fully compatible with ORing’s proprietary redundancy technologies (O-Ring, O-Chain, MRP, MSTP) when installed in the IGS-9122GPM chassis. - **Energy Efficiency:** Supports IEEE 802.3az Energy-Efficient Ethernet for reduced power consumption during low data activity. - **Advanced Network Management:** When integrated with the IGS-9122GPM, supports centralized management via ORing’s Open-Vision software suite, web interface, CLI, and SNMP. - **Ruggedized for Industrial Use:** Designed for applications in transportation, factory automation, power substations, and other mission-critical industrial networks.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Performance Fiber Connectivity:** Provides four independent 1000Base‑FX multi‑mode fiber ports with SC connectors, supporting full‑duplex Gigabit Ethernet operation over optical fiber. - **Modular Integration:** Designed as a plug‑in module for the RGS‑9000 series chassis, allowing flexible configuration of up to four interface modules per switch (three 1G modules and one 10G module). - **Industrial‑Grade Design:** Built for harsh environments with extended operating temperature ranges (‑40 °C to 85 °C when no 10G module is installed, or ‑20 °C to 60 °C with 10G module present). - **High Reliability and Redundancy:** Fully compatible with ORing’s proprietary O‑Ring and O‑Chain redundancy technologies, providing network recovery times under 30 ms across up to 250 connected devices. - **Standards Compliance:** Conforms to IEEE 802.3z 1000Base‑X and IEEE 802.3x flow control standards, ensuring interoperability with standard Ethernet equipment. - **Ease of Maintenance:** Hot‑swappable module design simplifies installation and replacement without system downtime. - **Optimized for Industrial Applications:** Compliant with IEC 61850‑3 and IEEE 1613 standards for power automation and substation environments, ensuring electromagnetic and environmental robustness. - **Centralized Management:** Fully manageable through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s Open‑Vision network management software.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

The SWM‑04GF‑MM‑SC‑D offers key capabilities that enhance an industrial Ethernet backbone: • Four dedicated 1000Base‑SX Gigabit fiber ports • Multi‑mode fiber operation optimized for short- to medium‑distance optical links up to 550 m • SC-type optical connectors for robust, industry‑standard fiber‑termination • Hot‑swappable design supporting uninterrupted module replacement • Seamless integration with the IGS‑9122GPM modular managed switch • Industrial temperature-tolerant construction suitable for harsh environments • Fulfills the modular design philosophy of ORing switches, enabling flexible network expansion • High reliability with documented MTBF ratings • Suitable for mission‑critical redundant topologies supported by the parent switch (O‑Ring, O‑Chain, MRP, MSTP)

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **High‑Performance Fiber Connectivity:** Four independent **1000Base‑FX single‑mode** fiber ports supporting full‑duplex Gigabit Ethernet transmission over long distances. - **Industrial‑Grade Design:** Engineered for use in **IEC 61850‑3** and **IEEE 1613** compliant environments, ensuring electromagnetic immunity and reliability in power automation and railway applications. - **Modular Integration:** Designed as a plug‑in module for the **RGS‑9000 Series** chassis, allowing flexible configuration of up to three Gigabit modules and one 10 G SFP+ module per switch. - **SC Optical Interface:** Equipped with four **SC‑type connectors** for single‑mode fiber, simplifying field installation and maintenance. - **Redundant Network Support:** Fully compatible with ORing’s proprietary **O‑Ring** and **O‑Chain** redundancy technologies, providing recovery times under **30 ms** across up to 250 nodes. - **Wide Temperature Operation:** Supports extended industrial temperature ranges from **–40 °C to +85 °C** (when no 10 G module is installed) or **–20 °C to +60 °C** (with 10 G module). - **Seamless Management Integration:** Managed through the RGS‑9000’s web interface, CLI, SNMP, or ORing’s **Open‑Vision** centralized management software. - **High Reliability and Long‑Distance Transmission:** Single‑mode optical design supports transmission distances up to **10 km or more**, depending on fiber type and transceiver characteristics.

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

4-port 1000LX module (Single Mode)

Manufacturer: Oring

Category: Marine (IEC60945) IEEE 1588v2

- **Comprehensive Network Management:** Supports centralized configuration, monitoring, and maintenance of up to 1000 IP devices. - **Integrated Utility Suite:** Includes four major modules—**ORing Commander**, **ORing Topology View**, **ORing Host Monitor**, and **ORing MAP**—for complete network visibility and control. - **Automatic Device Discovery:** Scans and identifies all ORing Ethernet switches and IP-based devices within the local network. - **Group Configuration Wizards:** - **IP Setting Wizard** – Batch configuration of IP addresses. - **Firmware Upgrade Wizard** – Simultaneous firmware updates for multiple devices. - **Redundant Ring (O-Ring) Wizard** – Simplified setup of ORing redundancy protocols. - **Visualized Network Topology:** Automatically generates a graphical topology map of all connected devices, with real-time link status and traffic flow visualization. - **Google Map Integration (ORing MAP):** Displays device locations geographically for field-deployed networks. - **Health and Status Monitoring:** Continuous polling and SNMP-based monitoring of device and link health. - **Event Logging and Notification:** Syslog integration, SNMP traps, and email alerts for abnormal events. - **Configuration Backup and Restore:** Supports group backup and restore of switch configurations. - **Unlimited Monitoring Capability:** No restriction on the number of devices monitored concurrently. - **Early Warning System:** Detects and reports network failures at an early stage to minimize downtime. - **Multi-Group Management:** Devices can be organized by IP range or functional group for easier administration. - **Traffic Flow Analysis:** Provides per-node traffic statistics for performance evaluation. - **Cross-Platform Compatibility:** Operates on multiple Windows versions with support for standard network protocols (TCP/IP, UDP, SNMP).

Manufacturer: Oring

Category: Admin Software

- **Comprehensive Network Management:** Supports configuration and monitoring of up to 100 IP devices, with 50 nodes available free of charge. - **Integrated Utility Suite:** Includes Commander, Topology View, Host Monitor, and MIB Browser for full-spectrum management. - **Graphical Topology Visualization:** Automatically discovers and displays network topology using LLDP and SNMP protocols. - **Geo Map Integration:** Displays device locations on Google Maps for geographic visualization of network assets. - **Multi-Domain Management:** Supports discovery and control across different IP domains through routing configuration. - **Group Configuration Wizards:** - **Group IP Setting Wizard** – batch configuration of IP addresses. - **Group Firmware Update Wizard** – simultaneous firmware upgrades. - **Group O-Ring Setting Wizard** – centralized redundancy configuration. - **Real-Time Monitoring:** Host Monitor provides continuous device status updates with visual and audible alarms. - **Syslog Integration:** Built-in Syslog server for event logging and export to Excel. - **SNMP Management:** Full SNMP v1/v2c/v3 support for secure device communication. - **O-Ring Redundancy Management:** Configuration and monitoring of ORing’s proprietary sub-10ms recovery ring topology. - **Security Management:** IP access control, port security, MAC blacklist, and IEEE 802.1x authentication. - **Traffic Control:** VLAN, QoS, IGMP Snooping, and rate limiting for optimized network performance. - **Backup & Restore:** TFTP-based configuration and firmware management. - **Event Notification:** Email and Syslog alerts for system and port events. - **Cross-Platform Compatibility:** Supports Windows NT, 2000, 2003, XP, Vista, and Windows 7.

Manufacturer: Oring

Category: Admin Software

• Supports monitoring and management of up to 1,000 IP devices • Integrated Geo Map (Google Maps–based) visualization for geographic device placement • Full-featured Windows-based utility suite: Commander, Topology View, Host Monitor, MIB Browser • Manage Oring switches with O-Ring topology support (sub-10 ms recovery, ring master detection) • Up to 50 nodes free; license key required for larger deployments • Automatic device discovery across local and remote subnets • Multi-switch configuration wizards: IP configuration, firmware update, and O-Ring setup • Comprehensive SNMP support (v1, v2c, v3) including traps, communities, users, authentication • Advanced network topology mapping using LLDP and SNMP • Integrated syslog server with auto-save and threshold-based export • Host monitoring for any IP-based device regardless of vendor • Supports multi-domain monitoring through routing configuration • Port-level diagnostics, MAC table inspection, rate control, VLAN configuration, redundancy settings • Centralized event logging and warning mechanisms via syslog, email (SMTP), and hardware relay • Backup/restore, auto-provisioning, firmware upgrade tools via TFTP or internal mechanism • Supports Windows NT, 2000, 2003, XP, Vista, Windows 7 • Redundancy technologies: O-Ring, Coupling Ring, Dual Homing, RSTP/STP • Security features: IP security, port security, MAC blacklist, IEEE 802.1x with RADIUS • IGMP Snooping (v1/v2/v3) with auto-querier • QoS with 4 priority queues based on port, 802.1p, or DSCP/TOS • Integrated diagnostic suite for port statistics, link status, traffic flow, and event logs

Manufacturer: Oring

Category: Admin Software

Powerful Network Management Windows Utility Suite, up to 250 nodes, Oring Topology View, Oring Commander, Oring Host Monitor, up to 50 nodes free of charge, Oring

Manufacturer: Oring

Category: Admin Software

Powerful Network Management Windows Utility Suite, up to 500 nodes, Oring Topology View, Oring Commander, Oring Host Monitor, up to 50 nodes free of charge, Oring

Manufacturer: Oring

Category: Admin Software