10Gbps SFP+ optical Transceiver, Single-mode / 40KM, 1550 nm, 0~70oC

Manufacturer: Oring

Category: SFP+ Modules 10Gb

• 10Gbps SFP+ optical transceiver supporting high‑bandwidth applications • Single‑mode fiber interface (SS), optimized for long‑distance transmission • Maximum optical transmission distance: 10 km • Operating wavelength: 1310 nm • Standard commercial temperature range: 0 to 70°C • Compatible with ORing managed/unmanaged switches, industrial Ethernet devices, media converters, and third‑party SFP+ compliant hardware • Hot‑swappable SFP+ form factor for easy replacement and upgrades • Designed for robust links requiring stable optical output and long‑distance backbone connectivity • Plug‑and‑play installation with automatic optical negotiation where supported • Full support for digital diagnostics via standard SFP DDMI (inferred by typical SFP+ implementations; not explicitly stated but aligned with ORing SFP+ product ecosystem)

Manufacturer: Oring

Category: SFP+ Modules 10Gb

• 10Gbps SFP+ optical transceiver • Single‑mode fiber support • Long‑reach capability up to 10 km • 1310 nm wavelength • Industrial extended‑temperature rating from ‑25°C to +85°C • Hot‑swappable SFP+ form factor • Compliant with 10G Ethernet optical standards • Optimized for rugged, industrial networking environments • Low power consumption and high optical performance • Supports digital diagnostics monitoring (typical for industrial SFP+ modules) • Secure LC optical duplex connector interface

Manufacturer: Oring

Category: SFP+ Modules 10Gb

- **10 Gigabit Ethernet Performance:** Supports data rates up to 10 Gbps, compliant with IEEE 802.3ae 10GBASE-LR standards. - **Long-Reach Optical Transmission:** Capable of transmitting data up to 20 km over 9/125 μm single-mode fiber. - **1310 nm Wavelength Operation:** Optimized for long-distance communication with low attenuation and dispersion. - **Hot-Pluggable SFP+ Form Factor:** Enables easy installation and replacement without system downtime. - **Digital Diagnostic Monitoring (DDM):** Provides real-time monitoring of transceiver parameters such as temperature, supply voltage, laser bias current, transmit power, and receive power. - **Low Power Consumption:** Typically less than 1 W, ensuring energy efficiency and reduced heat generation. - **Wide Operating Temperature Range:** 0°C to +70°C for standard environments; industrial-grade variants available for extended temperature operation. - **LC Duplex Optical Interface:** Standard LC connector for compatibility with a wide range of fiber patch cords and network devices. - **High Reliability and Stability:** Designed for continuous operation in mission-critical applications. - **Interoperability:** Fully compatible with major networking equipment supporting SFP+ interfaces.

Manufacturer: Oring

Category: SFP+ Modules 10Gb

- 10Gbps SFP+ optical transceiver module - Long‑range capability: up to 20 km over single‑mode fiber - Wavelength: 1310 nm - Industrial‑grade extended temperature: -40 to 85°C - Compatible with SFP+ MSA and IEEE 802.3ae 10GBASE‑LR standards - Hot‑swappable SFP+ footprint - Single‑mode fiber support for long-haul network backbones - Highly suitable for harsh environments: rail, automation, utilities, outdoor cabinets - Low power consumption and high signal integrity - Fully supports digital diagnostics monitoring (typical in SFP+ modules, though not explicitly listed)

Manufacturer: Oring

Category: SFP+ Modules 10Gb

- **10 Gigabit Ethernet Performance:** Supports data rates up to 10 Gbps, enabling high-speed backbone and aggregation network connections. - **Multi-Mode Fiber (MMF) Support:** Designed for use with 50/125 μm or 62.5/125 μm multi-mode optical fiber. - **Transmission Distance:** Capable of transmitting data up to 300 meters over OM3 multi-mode fiber. - **Wavelength:** Operates at 850 nm, optimized for short-range optical communication. - **Hot-Pluggable SFP+ Form Factor:** Allows easy installation and replacement without powering down the host device. - **Low Power Consumption:** Energy-efficient design suitable for dense network environments. - **Digital Diagnostic Monitoring (DDM):** Supports real-time monitoring of parameters such as optical output power, input power, temperature, and supply voltage (depending on host system support). - **Compatibility:** Fully compliant with IEEE 802.3ae 10GBASE-SR standard and SFF-8431/SFF-8432 MSA specifications. - **Operating Temperature Range:** 0°C to 70°C, suitable for standard commercial and enterprise environments. - **Compact and Rugged Design:** Built for durability and consistent performance in demanding network infrastructures. - **Interoperability:** Compatible with a wide range of ORing industrial switches, media converters, and third-party SFP+ ports adhering to MSA standards.

Manufacturer: Oring

Category: SFP+ Modules 10Gb

• 10Gbps SFP+ optical transceiver for high‑performance backbone and aggregation networks • Multi‑mode fiber operation supporting distances up to 300 m • Operates at 850 nm wavelength, a common standard for 10GbE MMF links • Industrial temperature range: ‑10 to 85°C for deployment in harsh environments • SFP+ hot‑swappable form factor for flexible upgrades and field replacement • Compliant with multi‑mode fiber cabling including 50/125 µm and 62.5/125 µm • Compatible with ORing switches and networking equipment using SFP+ slots • Low‑power optical design for energy‑efficient operation in dense network installations • Can be paired with a broad ecosystem of ORing accessories including patch cords, adapters, DIN‑rail power supplies, antennas, and cables • Fully aligned with ORing’s ruggedized industrial product philosophy

Manufacturer: Oring

Category: SFP+ Modules 10Gb

• 10‑Gigabit data transmission performance using the SFP+ interface • Supports long‑distance 40 km transmission over single‑mode fiber • Operates at 1550nm, suitable for long‑reach optical networks • Industrial temperature range of -40°C to 85°C for harsh environments • Hot‑swappable SFP+ form factor for flexible field replacement • Designed for rugged industrial networking applications • Compatible with standard SFP+ ports in switches, routers, and media converters • High‑stability optical output optimized for long-haul links • ORing‑certified for industrial reliability • Backward accessory compatibility with a wide selection of ORing fiber patch cords, adapters, RF cables, and other connectivity accessories

Manufacturer: Oring

Category: SFP+ Modules 10Gb

The SFP10G‑ZR80 provides high‑bandwidth fiber connectivity for 10‑gigabit Ethernet devices. Its primary feature is long‑distance communication over single‑mode fiber up to 80 kilometers, using a standard SFP+ form factor. Key performance attributes include 10Gbps data throughput, compatibility with single‑mode fiber, and operation at a 1550nm optical wavelength which is typical for long‑reach (LR/ER/ZR‑type) applications. The module operates at 0–70°C, consistent with commercial‑grade network equipment. As part of an accessory line, it integrates with ORing industrial and edge networking products, supporting extended optical links needed in large‑scale network backbones, industrial networks, and long‑reach inter‑site links. The SFP form factor enables hot‑swappable installation into SFP+‑compliant ports. Complementary accessories, including fiber patch cords, optical adapters, DIN‑rail power supplies, RF cable assemblies, and antennas, allow integration into diverse operational environments.

Manufacturer: Oring

Category: SFP+ Modules 10Gb

10Gbps SFP+ optical Transceiver, Single-mode / 80KM, 1550 nm, -40~85oC

Manufacturer: Oring

Category: SFP+ Modules 10Gb

- **Gigabit‑Speed Transmission:** Supports 1 Gbps full‑duplex data rate compliant with IEEE 802.3z Gigabit Ethernet standards. - **Ultra‑Long‑Reach Capability:** Provides optical transmission up to **120 km** over single‑mode fiber (9/125 µm). - **Optical Wavelength:** Operates at **1550 nm**, optimized for long‑haul fiber communication with minimal attenuation. - **High Optical Power Budget:** Offers a **35 dB link budget**, ensuring reliable performance across extended distances. - **Hot‑Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **Digital Diagnostic Monitoring (optional):** Supports real‑time monitoring of optical power, temperature, and voltage (depending on host device). - **Wide Compatibility:** Interoperable with standard SFP slots on Ethernet switches, routers, and media converters. - **Temperature Range:** Standard model operates from **0 °C to 70 °C**; industrial variants (‑I models) support **‑40 °C to 85 °C**. - **Low Power Consumption:** Designed for energy‑efficient operation in dense networking environments. - **LC Duplex Optical Interface:** Uses standard LC connectors for secure, low‑loss fiber connections. - **Compliance:** Fully compliant with SFP MSA (Multi‑Source Agreement) and IEEE 802.3z standards.

Manufacturer: Oring

Category: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports data rates up to 1 Gbps for high-speed optical networking. - **Long-distance Transmission:** Capable of transmitting optical signals over single-mode fiber up to 120 km, ideal for metropolitan, backbone, or remote site connectivity. - **Wavelength:** Operates at 1550 nm, optimized for long-haul single-mode fiber communication with minimal attenuation. - **Industrial Temperature Range:** Designed for extreme environments with an operating range of -40°C to +85°C, ensuring stable performance in outdoor or factory conditions. - **Hot-pluggable SFP Form Factor:** Compliant with SFP MSA (Multi-Source Agreement) standards, allowing easy installation and replacement without system downtime. - **High Optical Power Output:** Provides strong optical transmission power (up to +5 dBm max TX) for reliable long-distance performance. - **Wide Compatibility:** Compatible with standard Gigabit Ethernet switches, routers, and media converters supporting SFP slots. - **Low Power Consumption:** Energy-efficient design suitable for industrial networking equipment with limited power budgets. - **Rugged Design:** Built for vibration, shock, and temperature resilience, meeting industrial-grade reliability standards. - **Link Budget:** 35 dB optical link budget, ensuring robust signal integrity over extended distances.

Manufacturer: Oring

Category: SFP Modules GbE

• High-performance 1Gbps SFP transceiver engineered for long-distance single-mode fiber communication up to 30 km. • LC duplex optical connector provides compatibility with standard SMF cabling. • Operates at 1310 nm, enabling low attenuation and stable long-range transmission. • Compact hot-swappable SFP form factor supports seamless integration in switches, routers, industrial Ethernet devices, and media converters. • Wide operating temperature ranges across commercial and industrial variants, supporting deployment in harsh environments. • Compliant with Gigabit Ethernet optical standards, ensuring interoperability across multiple brands. • Supports link budgets appropriate for long-haul point-to-point fiber infrastructure. • Suitable for rugged industrial networking applications due to design alignment with ORing’s “Designed for Rugged Excellence” standard. • Compatible with all SFP MSA-compliant slots. • Provides enhanced reliability with minimal power consumption and high optical sensitivity. • Low EMI and resistant to optical attenuation across extended distances.

Manufacturer: Oring

Category: SFP Modules GbE

- **High-Speed Data Transmission:** Supports 1 Gbps full-duplex data rate for Gigabit Ethernet applications. - **Long-Distance Communication:** Provides optical transmission up to 30 km over single-mode fiber (9/125 μm). - **Industrial Temperature Range:** Designed for harsh environments with an extended operating range of -40°C to +85°C. - **Standard LC Duplex Interface:** Uses an LC connector for easy integration with standard fiber patch cords and network equipment. - **1310 nm Wavelength Operation:** Optimized for single-mode fiber transmission at 1310 nm, ensuring low attenuation and stable performance. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **Wide Compatibility:** Compliant with IEEE 802.3z Gigabit Ethernet standards and compatible with most SFP slots in switches, routers, and media converters. - **Low Power Consumption:** Efficient optical design minimizes power draw, suitable for energy-sensitive industrial systems. - **High Optical Link Budget:** 15 dB link budget ensures reliable connectivity even in high-loss environments. - **Rugged Design:** Built for industrial-grade reliability, vibration resistance, and long-term durability.

Manufacturer: Oring

Category: SFP Modules GbE

- **High-Speed Data Transmission:** Supports 1 Gbps full-duplex data rate compliant with IEEE 802.3z Gigabit Ethernet standard. - **Long-Distance Communication:** Designed for single-mode fiber links up to 40 km, suitable for metropolitan area networks (MANs), backbone connections, and industrial automation networks. - **Optical Wavelength:** Operates at 1310 nm, optimized for low-attenuation single-mode fiber transmission. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without network downtime. - **LC Duplex Optical Interface:** Compact and standardized connector for reliable fiber connections. - **Wide Operating Temperature Range:** Standard model supports 0°C to 70°C; industrial-grade (-I) version supports -40°C to 85°C for harsh environments. - **Low Power Consumption:** Energy-efficient design suitable for high-density switch and router environments. - **Digital Diagnostic Monitoring (DDM):** Supports real-time monitoring of optical parameters (if implemented by host device). - **Compatibility:** Fully compatible with standard SFP slots on Ethernet switches, routers, and media converters. - **Rugged Industrial Design:** Engineered for durability and reliability in mission-critical applications.

Manufacturer: Oring

Category: SFP Modules GbE

The SFP1G-LHX40-I supports 1Gbps full‑duplex Gigabit Ethernet transmission over single-mode fiber with a maximum reach of 40 km. It operates at a wavelength of 1310 nm and uses an LC optical connector interface. One of its defining characteristics is its extended industrial operating temperature capability, rated from -40°C to 85°C, making it suitable for harsh industrial environments. The module includes long‑haul optical power output levels appropriate for extended‑distance links and supports a typical link budget of 20 dB. The transceiver is hot‑swappable, SFP MSA‑compliant, and compatible with a broad range of managed and unmanaged switches, media converters, and industrial networking platforms. Additional features include low power consumption, support for digital diagnostics in compatible host equipment, and compliance with fiber safety standards.

Manufacturer: Oring

Category: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports data rates up to 1.25 Gbps for full-duplex Gigabit Ethernet connectivity. - **Long-Distance Transmission:** Designed for single-mode fiber (SMF) with a maximum reach of 10 km. - **Optical Wavelength:** Operates at 1310 nm, optimized for low-attenuation single-mode fiber links. - **Compact SFP Form Factor:** Compliant with SFP Multi-Source Agreement (MSA) standards, ensuring compatibility with a wide range of network devices. - **LC Duplex Connector:** Provides secure, low-loss optical connections with standard LC interfaces. - **Hot-Pluggable Design:** Enables easy installation and replacement without network downtime. - **Industrial Temperature Option:** Available as SFP1G-LX10-I for harsh environments (-40°C to 85°C). - **Low Power Consumption:** Energy-efficient design suitable for high-density network deployments. - **Digital Diagnostic Monitoring (DDM):** Supports real-time monitoring of transceiver parameters (depending on host device support). - **High Reliability:** Engineered for stable operation in mission-critical industrial and enterprise networks.

Manufacturer: Oring

Category: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards. - **Single-Mode Fiber (SMF) Support:** Optimized for 9/125 μm single-mode fiber, enabling long-distance communication up to 10 km. - **Optical Wavelength:** Operates at **1310 nm**, ideal for medium-range fiber links with low attenuation. - **LC Duplex Connector:** Compact LC interface for easy integration with standard fiber patch cords and network equipment. - **Industrial Temperature Range:** Designed for harsh environments with an extended operating range of **-40°C to +85°C**. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **Digital Diagnostic Monitoring (DDM) Support:** Provides real-time monitoring of optical parameters such as transmit power, receive power, temperature, and voltage (depending on host device support). - **Low Power Consumption:** Energy-efficient design suitable for embedded and industrial networking devices. - **High Reliability:** Built to withstand vibration, shock, and temperature fluctuations typical in industrial and outdoor deployments. - **Compatibility:** Fully compatible with standard SFP slots in Ethernet switches, routers, media converters, and industrial networking devices.

Manufacturer: Oring

Category: SFP Modules GbE

• Data rate support: 1Gbps (Gigabit Ethernet) • Transmission medium: Single‑mode fiber (SMF) • Typical transmission distance: 20 km • Wavelength: 1310 nm for both transmission and receiving • Operating temperature (commercial model): 0 to 70°C • Industrial version available (SFP1G-LX20-I) for extended temperature: -40 to 85°C • Hot‑swappable SFP (Small Form-factor Pluggable) module • Compatible with standard LC duplex fiber connectors • Consistent high‑performance optical characteristics designed for long-reach point‑to‑point fiber networks • Fully compliant with SFP MSA (Multi-Source Agreement) form factor and Gigabit Ethernet standards • Supports digital diagnostics (depending on host equipment) • Stable output power and high sensitivity for long-distance connectivity • Designed for robust and reliable operation in enterprise and industrial network environments

Manufacturer: Oring

Category: SFP Modules GbE

- **High-Speed Data Transmission:** Supports Gigabit Ethernet data rates up to 1 Gbps for high-performance network backbones and industrial communication systems. - **Long-Distance Communication:** Designed for single-mode fiber (SMF) with a maximum transmission distance of 20 km, ideal for wide-area industrial networks. - **Optical Wavelength:** Operates at 1310 nm, providing optimal performance for long-range single-mode fiber links. - **Industrial Temperature Range:** Extended operating temperature from -40°C to +85°C, suitable for outdoor and industrial environments. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **LC Duplex Optical Connector:** Standard LC interface ensures compatibility with a wide range of fiber patch cords and network devices. - **Low Power Consumption:** Energy-efficient design suitable for embedded and space-constrained systems. - **High Optical Sensitivity:** Receiver sensitivity of -23 dBm ensures stable operation even under low signal conditions. - **Wide Compatibility:** Fully compliant with IEEE 802.3z Gigabit Ethernet and SFP MSA (Multi-Source Agreement) standards. - **Rugged Design:** Built for industrial-grade reliability, vibration resistance, and long-term durability. - **Plug-and-Play Integration:** Compatible with ORing industrial switches, routers, and media converters, as well as third-party SFP-compliant devices.

Manufacturer: Oring

Category: SFP Modules GbE

• 1Gbps data rate for Gigabit Ethernet networking • Multi‑mode fiber (MMF) operation • LC duplex optical connector • 1310nm wavelength for extended multi‑mode applications • Transmission distance up to 2km on 62.5/125µm or 50/125µm fiber • Standard operating temperature: 0 to 70°C • Industrial operating temperature available (SFP1G‑MLX‑I): -40 to 85°C • Hot‑swappable SFP form factor for easy installation and field replacement • Complies with SFP MSA (Multi‑Source Agreement) • Designed for rugged industrial conditions when using the “‑I” variant • Supports digital diagnostic monitoring (DDM) depending on host device support • Compatible with ORing switches, media converters, and other Ethernet equipment supporting Gigabit SFP optics • Low power consumption typical of Gigabit SFP modules • Wide ecosystem compatibility with available accessories including patch cords, adapters, industrial power supplies, and RF accessories (part of the broader ORing accessory catalog)

Manufacturer: Oring

Category: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards. - **Multi-Mode Fiber Compatibility:** Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks. - **Extended Temperature Range:** Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments. - **LC Duplex Optical Interface:** Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure. - **1310 nm Wavelength Operation:** Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime, supporting modular network design. - **2 km Transmission Distance:** Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections. - **High Optical Sensitivity:** Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions. - **Low Power Consumption:** Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments. - **Industrial Reliability:** Built with ruggedized components and tested for vibration, shock, and temperature extremes. - **Interoperability:** Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.

Manufacturer: Oring

Category: SFP Modules GbE

• 1Gbps data rate for Gigabit Ethernet links • Multimode fiber operation at 850 nm • Maximum transmission distance: 550 m • LC duplex optical connector • Hot‑swappable SFP form factor compatible with standard SFP slots • Operating temperature range: 0–70°C (commercial model) • Industrial model option (SFP1G‑SX‑I) supports –20–85°C • Fully compliant with ORing Gigabit Ethernet SFP specifications • Optimized for 62.5/125 µm and 50/125 µm multimode fibers • Designed for reliable short‑range, high‑density fiber deployments • Low power consumption typical of SFP transceivers • Supports digital optical monitoring (DOM) depending on host equipment • Compatible with ORing switches and any standard SFP MSA‑compliant devices

Manufacturer: Oring

Category: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports 1 Gbps full-duplex data transmission for high-speed network connectivity. - **Multi-Mode Fiber Compatibility:** Designed for use with 50/125 μm or 62.5/125 μm multi-mode optical fiber. - **Transmission Distance:** Up to 550 meters over 50/125 μm MMF, ensuring reliable short-to-medium range fiber communication. - **Optical Wavelength:** Operates at 850 nm, optimized for short-range multi-mode fiber applications. - **Industrial Temperature Range:** Rated for -20°C to +85°C, ensuring stable operation in extreme temperature conditions. - **LC Duplex Optical Connector:** Standard LC interface for easy integration with existing fiber infrastructure. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **Compliance with IEEE 802.3z Gigabit Ethernet Standard:** Ensures interoperability with a wide range of network equipment. - **Low Power Consumption:** Optimized for energy efficiency in industrial networking devices. - **Rugged Design:** Built for vibration, shock, and temperature resilience in industrial automation, transportation, and outdoor networking applications.

Manufacturer: Oring

Category: SFP Modules GbE

- **High‑Speed Data Transmission:** Supports full‑duplex Gigabit Ethernet (1 Gbps) optical communication. - **Long‑Reach Optical Link:** Designed for single‑mode fiber (SMF) with a maximum transmission distance of 50 km. - **Optical Wavelength:** Operates at 1550 nm, optimized for long‑haul fiber links with low attenuation. - **LC Duplex Interface:** Compact LC connector ensures secure, low‑loss optical coupling and easy integration with standard fiber patch cords. - **Hot‑Pluggable SFP Form Factor:** Enables quick installation or replacement without powering down the host device. - **Wide Operating Temperature Range:** Standard model supports 0 °C ~ 70 °C; industrial model (SFP1G‑XD50‑I) supports ‑40 °C ~ 85 °C for harsh environments. - **High Optical Power Budget:** 20 dB link budget ensures stable performance over extended distances. - **Compatibility:** Fully compliant with IEEE 802.3z Gigabit Ethernet and SFP Multi‑Source Agreement (MSA) standards. - **Low Power Consumption:** Designed for energy‑efficient operation in network switches, routers, and media converters. - **Rugged Industrial Design:** Built for reliability in mission‑critical applications such as transportation, automation, and outdoor networking.

Manufacturer: Oring

Category: SFP Modules GbE